Оценок - 3, средний балл: 3.3
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
If Progressive Scan is supported, follow the TV User’s Manual’s instructions regarding Progressive Scan settings in the TV’s menu system. • If the screen is blocked by setting the wrong Video Output, See page 33. Setting Up the Control The Parental Control function with DVDs that have been assigned helps you control the types of DVDs watches. There are up to 8 rating levels on a disc. 1. With the unit in Stop mode, press the MENU button. 2. Select Setup using UP/DOWN buttons, then RIGHT or ENTER button. 3. Select Parental Setup using UP/DOWN buttons, then press the RIGHT or ENTER button. 4. Use RIGHT or ENTER to select Yes if you want to use a password. The Enter Password screen appears. PARENTAL SETUP Use Password : No ENTER RETURN MENU 5. Enter your password. The Re-enter Password screen appears to confirm the password. Enter your password again. The player is locked ( ). CREATE PASSWORD Enter Password - - - 0 ~ 9 RETURN ENG-30 ENG-31 Setting Up the Control Troubleshooting CREATE PASSWORD Re-enter Password - - - 0 ~ 9 RETURN Setting Up the Rating Level 1. With the unit in Stop mode, press the MENU button. 2. Select Setup using UP/DOWN buttons, then RIGHT or ENTER button. The player is locked ( ). 3. Select Parental Setup using UP/DOWN buttons, then press the RIGHT or ENTER button. 4. Enter your password. The Parental Setup screen appears. PASSWORD CHECK Enter Password - - - 0 ~ 9 RETURN 5. Select Rating Level using UP/DOWN buttons, and press ENTER or RIGHT button. 6. Select Rating Level you want using UP/DOWN buttons. For example, if you select up to Level 6, discs that contain Level 7, 8 will not play. - To cancel the Rating Level, select No using RIGHT or ENTER in Use Password. e.g) Setting up in LEVEL6. RATING LEVEL Level 8 Adult Level 7 Level 6 Level 5 Level 4 Level 3 Level 2 Level 1 Kids Safe About the Change Password; - Highlight Change Password using UP/DOWN buttons. - Press ENTER button. The Change Password screen appears. - Enter your new password. Enter the new password again. Note NoteNote • How to make the SETUP menu disappear or return to menu screen during set up; Press RETURN or LEFT button. • If you have forgotten your password, see Forgot Password in the Troubleshooting Guide. Before requesting service ( Action Problem Page • Check the batteries in the remote. They may need replacing. No operations can be • Operate the remote control at a distance of no more performed with remote. P3 minutes to drain the microprocessor inside the remote to reset Reinstall batteries and try to operate the remote again. • Remove batteries and hold down one or more buttons for • Ensure that the disc is installed with the label side facing up. Disc does not play. P5 • Check the region number of the DVD. • 5.1 channel sound is reproduced only when the following conditions are met. : 1) The DVD player is connected with the proper amplifier 2) The disc is recorded with 5.1 channel sound. P10 • Check whether the disc being played has the “ Dolby 5.1 ch” mark on the outside. • Check if your audio system is connected and working properly. P29 • In a SETUP Menu, is the Audio Output set to Bitstream? • The features or action cannot be completed at this time because: screen. The icon appears on 1. The DVD’s software restricts it. 2. The DVD’s software doesn’t support the feature (e.g., angles). P12 3. The feature is not available at the moment. 4. You’ve requested a title or chapter number or search time that is out of range. Disc Menu doesn’t appear. • Check if the disc has a Menu. Play mode differs from the • Some of the functions selected in the Setup Menu may not work Setup Menu selection. P26~32 properly if the disc is not encoded with the corresponding function. The screen ratio cannot • The Screen Ratio is fixed on your DVDs. P30~31 be changed. • Make sure you have selected the correct Digital Output in the No audio. P29 Audio Options Menu. • Press power on from a cold start with no disc in the unit. Press the STOP ( The screen is blocked ) and PLAY ( ) buttons simultaneously on the front panel for three seconds. The SELECT MENU LANGUAGE display P31 will appear. Select the number button of the desired language. • Press power on from a cold start with no disc in the unit. Press the STOP ( ) and PLAY ( ) buttons simultaneously on the front panel for three seconds. The SELECT MENU LANGUAGE display will appear. Select the number button of the desired language. P31~32 Press the MENU button, and then press DOWN button to select the Parental Setup. The Parental Setup is now unlocked as indicated on the display. You can change your password. • Go to the contents and find the section of the instruction book that problems. If you experience other contains the explanations regarding the current problem, and follow the procedure once again. • If the problem still cannot be solved, please contact your nearest authorized service center. 5.1 channel sound is not being reproduced. Forgot password ENG-32 ENG-33 Specifications P...