Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
a. How to make the SETUP MENU disappear or return to menu screen during set up; Press RETURN button. u Certain audio features of this product manufactured under a license from Desper Products, Inc. Spatializer® and circle-in-square device are trademarks owned by Desper Products, Inc. . Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. ©1992-1997 Dolby Laboratories Inc. All rights reserved. . “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc. Setting Up the Display Options 1 With no disc playing, press the SETUP button. 2 Use the , button to select DISPLAY OPTIONS. Then press the ENTER button. 3 Use the , button to select the desired item. Then press the , button. ¶ TV ASPECT 1 4:3 LETTER BOX : Select when you want to see the total 16:9 ratio screen DVD supplies, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen. 2 4:3 PAN-SCAN : Select this for conventional size TVs when you want to see the central portion of the 16:9 screen. (Extreme left and right side of movie picture will be cut off.) 3 16:9 WIDE : You can view the full 16:9 picture on your widescreen TV. · STILL MODE 1 2 3 FIELD : Select this feature when the screen shakes in the AUTO mode. FRAME : Select this feature when you want to see small letters more clearly in the AUTO mode. AUTO : When selecting AUTO, FIELD/FRAME mode will be automatically converted. . SCREEN MESSAGES Use to turn on-screen messages on or off. . BLACK LEVEL Adjusts the brightness of the screen. . QUASI-PAL Depending on a disc, you can play a NTSC DVD disc by Quasi-PAL mode. au How to make the SETUP MENU disappear or return to menu screen during set up; Press RETURN button. 1 TV Aspect 4:3 L-Box 2 Still Mode Auto 3 Screen Messages On 4 Black Level Off 5 Quasi-PAL Off DISPLAY OPTIONS 6160 01479A DVD-V5000/XSA-GB5 9/5/56 8:09 AM Page 62 Technical Specifications Problems and Solutions (VCR) GB GB Before contacting the Samsung after-sales service, perform the following simple checks. Problem Explanation/Solution General Rated voltage AC100 - 240V, 50/60Hz Power consumption 32Watts Weight 5.6Kg Size 430mm X 357mm X 100mm Operating ambient temperature +5°C ~ +35°C Installation conditions Operation position : Horizontal, Relative humidity :Below 75% Input Video input (Rear) RCA jack : 1.0Vp-p (unbalanced) 75W Audio input (Rear) RCA jack :-8dBm, 47Kohm unbalanced Output RF out UHF 21-69 (Initial CH36) UHF 28-69 (Initial CH38) : Australia model Audio (DVD, VCR) Headphones, RCA jack Audio (DVD only) Digital audio out (OPTICAL, COAXIAL) Video (DVD, VCR) RCA jack Video (DVD only) S-Video out COMPONENT out : RCA jack VCR Tape format VHS type video tape, S-VHS type video tape (Playback only) Color system PAL, MESECAM, NTSC4.43, NTSC playback on PAL TV Tuning system B/G, D/K (OPTION) Video S/N Above 43dB (standard recording) Resolution Above 240 lines (standard recording) Audio S/N Above 68dB (Hi-Fi), 39dB (Mono) Audio frequency characteristics 20Hz - 20KHz (Hi-Fi) DVD Disc DVD, CD (12cm), CD(8cm), VIDEO-CD (12cm) Audio S/N 115dB Audio dynamic range 105dB No power u Check that the power plug is connected to a wall outlet. u Have you pressed the STANDBY/ON button? You cannot insert a video cassette u A video cassette can only be inserted with the window side up and the safety tab facing you. The television programme was not recorded u Check the DVD-VCR aerial connections. u Is the DVD-VCR tuner properly set? u Check if the safety tab is intact on the cassette. Timer recording was unsuccessful u Was the STANDBY/ON button pressed to activate the timer? u Re-check the recording start/stop time settings. . If there was a power failure or interruption during timer recording, the recording will have been cancelled. No playback picture or the picture u Check to see if you are using a prerecorded tape. is distorted You cannot see normal broadcasts . Check the TUNER/EXTERNAL setting. It should be on TUNER. u Check the TV/VCR aerial connections. Noise bars or streaks on playback u Press the TRK (+or -) buttons to minimize this effect. When the II button is pressed u A still picture may have “noise bars”, depending on the during playback, the still picture condition of the tape. Press the TRK (+or -) buttonsduring has severe “noise bars” streaks SLOW motion to minimize this effect. Video Head Cleaning u If poor pictures appear on a variety of cassettes, the video heads may need cleaning. This is not a common problem and unless it appears, the heads should not be cleaned. When cleaning the video heads, read all instructions provided with the head cleaning cassette. Incorrect head cleaning can permanently damage the video heads. If when tuning in your TV to the DVD-VCR 1. Remove the aerial input plug from the socket marked (aerial test pattern your TV does not find the test symbol) on the rear of the DVD-VCR. pattern or t...
Эта инструкция также подходит к моделям:DVD-проигрыватели - DVD-V5000 (1.06 mb)
DVD-проигрыватели - SV-DVD1 (1.06 mb)