Оценок - 5, средний балл: 3.4
(
)
)
|
Фрагмент инструкции
Notes • When setting the timer with PDC signals, enter the start times exactly as indicated in the TV programme guide. Otherwise, the PDC function will not work. • If the PDC signal is too weak or the broadcasting station failed to transmit PDC signals, the VCR will start recording at the set time without using the PDC function. • The indicator flashes in the display window when you press ?/1 with no tape inserted. To watch another TV programme after setting the timer 1 If your TV is connected to the VCR using A/V connections, set the TV to the TV’s aerial input; if not, skip this step. 2 Select another channel on the TV. Tips • To set the channel, you can also use the V/v or number buttons. • If the indicator appears, this means that the VCR is currently recording this programme. • You can also do the following tasks while the VCR is recording: – Reset the counter (page 37). – Display tape information on the TV screen (page 41). Basic Operations Recording TV programmes using the timer Checking/changing/cancelling timer settings Before you start… • Check that the DVD-VCR clock is set to the correct time. • Turn on the DVD-VCR and your TV. • Switch the input selector on your TV so that the signal from the player appears on the TV screen. •Set TV / DVD·VIDEO to DVD·VIDEO, then press SELECT VIDEO to control the VCR (page 9). • When using a satellite or digital tuner, turn it on. • Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time. • If the DVD player is in play mode, you cannot display the setup menu. Stop the DVD playback. CLEAR SET UP V/v/B/b ENTER 1 SET UP Press SET UP, then press V/v to select (TIMER) and press ENTER. The “TIMER METHOD” menu appears. TIMER METHOD ENTER Standard VideoPlus V v RETURN SET UPENTER 2 2 ENTER Press V/v to select “Standard,” then press ENTER. • If you want to change a setting, go on to the next step. • If you do not need to change the settings, press SET UP to exit the menu. SET UP Checking/changing/cancelling timer settings PR DATE START STOP SPEED PDC 35 MO 30 20:001 :00 SP Off 2 20WE 0222:00 23:30 LP Off 60TU 3020:30 22:00 AutoOff ENTER Press V/v to select setting you want to change or cancel. • To change the setting, press B/b to select the item you want to change, and press V/v to change it. CLEAR • To cancel the setting, press CLEAR. VvBb ENTER CLEAR SET UP ENTER Press ENTER to confirm the setting. ENTER Press ENTER to confirm all settings. If any settings remain, turn off the VCR to return to recording standby. To record from other equipment, leave the connected equipment switched on. When the timer settings overlap The programme that starts first has priority and the second programme starts recording only after the first programme has finished. If the programmes start at the same time, the programme listed first in the menu has priority. Basic Operations Programme 1 about 20 seconds Programme 2 will be cut off Programme 1 Programme 2 about 20 seconds will be cut off Checking/changing/cancelling timer settings Advanced Hookups A/V Receiver hookup A Use this hookup if your A/V receiver has a Dolby* Surround (Pro Logic) decoder and 3 to 6 speakers You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multi-channel audio (Dolby Digital) discs. * Manufactured under license from Dolby Laboratories. “Dolby,” “Pro Logic,” and the double- D symbol are trademarks of Dolby Laboratories. DVD-VCR A R L VIDEO AUDIO l: Signal flow Stereo audio cord (supplied) (red) (white) to audio input (white) (red) to OUT AUDIO L/R [Speakers] [Speakers] Amplifier (receiver) with Dolby Surround decoder Rear (L) Rear (R) Front (L) Front (R) Subwoofer Centre A/V Receiver hookup B Use this hookup if your A/V receiver has a Dolby Digital, MPEG audio or DTS* decoder, a digital input jack and 6 speakers This connection will allow you to use the Dolby Digital, MPEG audio or DTS decoder function of your AV amplifier (receiver). You are not able to enjoy the surround sound effects of this player. You must make connections using B-1 and B-2 . * “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc. DVD-VCR B-2 R L VIDEO AUDIO OPTICAL DIGITAL AUDIO OUT COAXIAL B-1 [Speakers] or Coaxial digital cord (not supplied) l: Signal flow Stereo audio cord (supplied) (red) (white) to audio input (white) (red) to OUT AUDIO L/R and to DIGITAL AUDIO OUT (COAXIAL or OPTICAL) Optical digital cord (not supplied) Remove jack cap before connecting to coaxial or optical digital input [Speakers] Advanced Hookups AV amplifier (receiver) having a decoder Rear (L) Subwoofer Front (L) Centre Rear (R) Front (R) Note • After you have completed the connection, be sure to set “Dolby Digital” to “Dolby Digital” and “DTS” to “On” in “AUDIO SETUP” menu (page 55). If your AV amplifier (receiver) has an MPEG audio decoder function, set “MPEG” to “MPEG” in “AUDIO SETUP” menu (page 55). Otherwise, no sound or a loud noise will come from the speak...
Эта инструкция также подходит к моделям:DVD-проигрыватели - SLV-D930 (1.5 mb)