Оценок - 4, средний балл: 3.8
(
)
)
|
Фото и характеристики Sony DVP-NS355 |
К этому устройству также есть другие инструкции:
Фрагмент инструкции
D D Connecting to an AV amplifier (receiver) with a digital input jack having a Dolby Digital, MPEG audio or DTS decoder and 6 speakers This connection will allow you to use the Dolby Digital, MPEG audio or DTS decoder function of your AV amplifier (receiver). CD/DVD player to DIGITAL OUT (COAXIAL or OPTICAL*) or Optical digital cord Coaxial digital cord (not supplied) (not supplied) Remove jack cap before connecting to coaxial digital input to optical digital input COMPONENT VIDEO OUT / PR / CR VIDEO NORMAL PROGRESSIVE S VIDEO OUT LINE OUTY PB CB LINE (RGB) -TV L CENTER LINE OUT AUDIOR L PCM/ DTS/ MPEG/ DOLBY DIGITAL OPTICAL COAXIAL DIGITAL OUT D PCM/ DTS/ MPEG/ DOLBY DIGITAL OPTICAL COAXIAL DIGITAL OUT Hookups Front (L) AV amplifier (receiver) having a decoder Subwoofer Centre [Speakers] [Speakers] Rear (L) Rear (R) l: Signal flow * For DVP-NS585P/NS590P only z Hint Use connection D when connecting to 7 or more speakers (6.1 ch or more). Notes • After you have completed the connection, be sure to set “DOLBY DIGITAL” to “DOLBY DIGITAL” and “DTS” to “ON” in Quick Setup (page 24). If your AV amplifier (receiver) has an MPEG audio decoder function, set “MPEG” to Front (R) “MPEG” (page 68). Otherwise, no sound or a loud noise will come from the speakers. • In order to listen to DTS sound tracks, you must use this connection. DTS sound tracks are not output through the LINE OUT L/R (AUDIO) jacks, even if you set “DTS” to “ON” in Quick Setup (page 24). • When you connect an amplifier (receiver) that conforms to the 96 kHz sampling frequency, set “48kHz/96kHz PCM” in “AUDIO SETUP” to “96kHz/24bit” (page 68). ,continued Step 5: Connecting the Mains Lead Plug the player and TV mains lead (power cord) into a mains. Step 6: Quick Setup Follow the steps below to make the minimum number of basic adjustments for using the player. To skip an adjustment, press >. To return to the previous adjustment, press .. The on-screen display differ depending on the player model. ENTER 1 Turn on the TV. 2 Press [/1. 3 Switch the input selector on your TV so that the signal from the player appears on the TV screen. “Press [ENTER] to run QUICK SETUP” appears at the bottom of the screen. If this message does not appear, select “QUICK” under “SETUP” in the Control Menu to run Quick Setup (page 63). 4 Press ENTER without inserting a disc. The Setup Display for selecting the language used in the on-screen display appears. LANGUAGE SETUP OSD: MENU: AUDIO: SUBTITLE: ITALIANO ESPANOL NEDERLANDS DANSK SVENSKA FRANCAIS ENGLISH ENGLISH DEUTSCH 5 Press X/x to select a language. The player uses the language selected here to display the menu and subtitles as well. 6 Press ENTER. The Setup Display for selecting the aspect ratio of the TV to be connected appears. TV TYPE: 16:9 4:3 LETTER BOX 4:3 PAN SCAN ON AUTO 16:9 SCREEN SETUP SCREEN SAVER: BACKGROUND: LINE: COMPONENT OUT: MODE (PROGRESSIVE): 7 Press X/x to select the setting that matches your TV type. . If you have a wide-screen TV or a 4:3 standard TV with a wide-screen mode • 16:9 (page 64) . If you have a 4:3 standard TV • 4:3 LETTER BOX or 4:3 PAN SCAN (page 64) 8 Press ENTER. The Setup Display for selecting the type of video signal output from the COMPONENT VIDEO OUT jack appears. ON ON OFF COMPONENT OUT: MODE (PROGRESSIVE): SCREEN SETUP TV TYPE: 16:9 SCREEN SAVER: ON BACKGROUND: JACKET PICTURE LINE: VIDEO 9 Press X/x to select if you wish to receive progressive video signals or not. Select “ON” only if you have made video connection A (page 16) and wish to view progressive video signals. 10Press ENTER. The Setup Display for selecting the type of video signal output from the LINE (RGB)-TV jack appears. LINE: VIDEO VIDEO S VIDEO RGB COMPONENT OUT: MODE (PROGRESSIVE): SCREEN SETUP TV TYPE: 16:9 SCREEN SAVER: ON BACKGROUND: JACKET PICTURE 11Press X/x to select the type of signal you want to output from the LINE (RGB)-TV jack. If you set “LINE” to “RGB,” you cannot select “COMPONENT OUT”. (the player outputs no component video signals.) . Video signals • VIDEO (page 64) . S video signals • S VIDEO (page 64) . RGB signals • RGB (page 64) 12Press ENTER. The Setup Display for selecting the type of jack used to connect your amplifier (receiver) appears. YES NO Is this player connected to an amplifier (receiver) ? Select the type of jack you are using. LINE OUTPUT L/R (AUDIO) DIGITAL OUTPUT Hookups 13Press X/x to select the type of jack (if any) you are using to connect to an amplifier (receiver), then press ENTER. Choose the item that matches the audio connection you selected on pages 20 to 23 ( through A ). D A • If you connect just a TV and nothing else, select “NO.” Quick Setup is finished and connections are complete. B-1 C-1 • Select “LINE OUTPUT L/R (AUDIO).” Quick Setup is finished and connections are complete. B-2 C-2 D • Select “DIGITAL OUTPUT.” The Setup Display for “DOLBY DIGITAL” appears. 14Press X/x to select the type of Dolby Digital signal you wish to send to your amplifier (receiver)...
Эта инструкция также подходит к моделям:DVD-проигрыватели - DVP-NS360 (1.17 mb)
DVD-проигрыватели - DVP-NS585P (1.17 mb)
DVD-проигрыватели - DVP-NS590P (1.17 mb)