Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
4 Select 'RECORD SET UP' with K/Land confirm with B. 5 Select 'RECORD LINK' with K/L. SELECT KL CHOOSE B 6 Select function 'ON' with B. [SP] RECORD SPEED 7 To end, press STATUS/EXIT. DIRECT RECORD [OFF] 8 Insert a cassette. RECORD LINK [OFF] 9 Programme the satellite receiver with the required information (programme number of the TV channel, END=EXIT start time, end time). If necessary, please see the operating instructions for your satellite receiver. 10 Press TIMER SET. The DVD/VCR is now ready to record.The beginning and end of the recording is controlled via scart socket AV2(DECODER). 'Direct Record' With Direct Record, you can record the right TV channel in seconds even if your DVD/VCR is switched off. If the recording is started manually, the DVD/VCR uses the current TV channel set on the TV.You will find more information on how to switch 'Direct Record' on or off in the next section. Make sure that your DVD/VCR socket (AV1/TV) and the TV are connected by a scart cable. 1 On the TV, select the programme number you want make the recording from. 2 Press RECORD Iwith the DVD/VCR switched off. 3 Stop recording with STOP C. How does Direct Record work? The DVD/VCR compares the TV channel selected on the TV set with its stored TV channels via the scart cable. If the same TV channel is found, it switches the DVD/VCR to the corresponding programme number and starts recording. Please do not change the TV channel on the TV set during the search so as not to affect the process. Switching 'Direct Record' on or off 1 Switch on the TV. If required, select the programme number for the DVD/VCR. 2 Press DISC/VCR MENU.The main menu will appear. 3 Select 'RECORD SET UP' with SELECT KL CHOOSE B K/Land confirm with B. RECORD SPEED [SP] 4 In 'DIRECT RECORD', select 'OFF' DIRECT RECORD [OFF] (Direct Record off) or 'ON' RECORD LINK [OFF] (Direct Record on) with B. 5 To end, press STATUS/EXIT. 6 Press STANDBY-ON. END=EXIT Direct dubbing Follow the steps below to copy a DVD or video disc to a videotape.This will be possible only if the DVD is not copy protected. 1 Put a videotape in the cassette compartment. Make sure the tape’s record tab is intact and the tape is long enough to record the disc. 2 Press VCR. 3 Select the recording speed. Details are at “Selecting the recording speed (SP or LP)”. 4 Put the DVD you want to copy in the disc tray. 5 Press DVD. 6 Press PLAY B.While disc is playing, press PAUSE kat the point you wish to start recording. 7 Press DIRECT DUBBING to record. To pause the recording. Press PAUSE k. To resume recording. Press PAUSE kagain. To stop the recording. Press STOP C. Recording(From DVD To VCR) 1 Insert a DVD without copyright protection in the tray. 2 Insert a video cassette tape with its erase prevention tab in place. 3 Select the recording speed. Details are at “Selecting the recording speed (SP or LP)”. 4 Enter “004” with numerical key pads to appear “DISC” on the TV screen. 5 Press RECORD I. 6 Change to DVD operation mode. 7 Press DVD, then PLAY Bto begin the playback of a DVD. 8 Press VCR, then STOP Cto stop recording. English Programming a Recording (TIMER) English General information Use a TIMER programming to automatically start and stop a recording at a later time or date.The DVD/VCR will switch to the right programme number and begin recording at the correct time.With this DVD/VCR,you can pre-programme up to eight recordings within a period of one year.To make a programmed recording, your DVD/VCR needs to know: * the date you want to make the recording * the programme number of the TV channel * the start and stop time of the recording * VPS or PDC on or off This information is saved in a TIMER block. What is 'VPS/PDC'? 'VPS' (Video Programming System)/ 'PDC' (Programme Delivery Control) are used to control the start and duration of TV channel recordings. If a TV programme starts earlier or ends later than scheduled, the DVD/VCR will turn on and off at the correct time. What do I need to know about 'VPS/PDC'? Usually the VPS or PDC time is the same than the start time. But if your TV guide shows a VPS or PDC time which is different from the programme’s scheduled start time, e.g. 20.10 (VPS/PDC 20.14), you must enter the VPS/PDC time exact to the minute. If you want a start time different from the VPS/PDC time, you must switch VPS/PDC off. Programming a recording (with the 'SHOWVIEW® system') R You no longer need to tediously enter the date, programme number,start and end time.All the information needed for programming is contained in the SHOWVIEW-programming number. You can find this SHOWVIEW number in most TV listing magazines written next to the concerned programme. 1 Press SV/V+. ShowView system 2 Enter the entire SHOWVIEW num- ShowView No. ber.This number is up to 9 digits long and can be found next to the 12345 –––– start time of the TV programme in your TV listing magazine. [e.g: 1-SET=SV/V+ CORRECT=CLEAR 234-5 or 1 234 5] END=EXIT If you make a mistake, you can clear your input wit...
Эта инструкция также подходит к моделям:DVD-проигрыватели - ShowView DVD757VR/02 (720.83 kb)