Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Rapid Tune Press R-TUNE to display the last channel you were watching. Audio Mute Press MUTE to instantly mute the sound. Press again to restore the previous sound level. Phones Connect an earphone (not supplied) or headphones (not supplied) to the Phones Jack. Ready Checklist All connections are made. (See page 11). Your unit is plugged in. PHONES Jack POWER VOL + / VOL - CH *Important: If a remote control button does not work when pressed, press the button on the remote and try the button again. Use CH or number keys to select a channel. 2 0 8 ABC 3 Press VOL + or VOL - to adjust volume. 24 MTS Broadcast/TV Stereo System MTS Broadcast/TV Stereo System Equipped with ® -TV Noise Reduction for true MTS reproduction. ® -TV Noise Reduction is required for good stereo separation and audio fidelity. ® is a registered trademark, and is licensed by ® Technology Licensing. < Example > Receivable Broadcast Types The following are possible audio broadcast types and on-screen displays. The signal being received is indicated with an “ ” mark while the selected audio mode is indicated with an arrow. To change the audio mode for these broadcasts, see the “Select Audio Mode for TV Viewing” section (below.) Press DISPLAY to display the broadcast signal being received. STOP 12 : 0 0AM ABC 0 : 00 : 00 SPSTEREO SAP MONO STOP 12 : 0 0AM ABC 0 : 00 : 00 STEREO SP SAP MONO STOP 12 : 0 0AM ABC 0 : 00 : 00 STEREO SP SAP MONO MTS Stereo and SAP broadcast Multi-channel Television Sound Stereo (main language) and Secondary Audio Program (sub language) broadcasts are being received simultaneously. Select the STEREO or SAP audio mode. MTS Stereo broadcast Multi-channel Television Sound Stereo broadcast. Select STEREO audio mode. • If stereo broadcast is weak and the display flickers, select MONO audio mode for possibly better results. SAP broadcast Secondary Audio Program (sub language). Select SAP audio mode for the sub language. STOP 12 : 0 0AM ABC 0 : 00 : 00 SPSTEREO SAP MONO MONO broadcast Normal monaural sound broadcast. Audio Mode for TV Viewing Press AUDIO to select the desired audio mode as described above. (Arrow shows selection.) • Each press of AUDIO will change the audio mode as shown below. • “SAP” is selected with first press of AUDIO. TV Operation STOP 12 : 0 0AM ABC 0 : 00 : 00 SPSTEREO SAP MONO Press AUDIO Press AUDIO Press AUDIO STOP 12 : 0 0AM ABC 0 : 00 : 00 SPSTEREO SAP MONO STOP 12 : 0 0AM ABC 0 : 00 : 00 SPSTEREO SAP MONO 23 Closed Caption System Closed Caption System Closed Caption is ... This multi-use system not only allows the hearing impaired to enjoy selected programs, but also makes useful information from TV stations available to everyone. Closed Caption Mode Feature 1 1 Press ACTION* to display MAIN MENU. 2 2 MAIN MENU DVD LOCK CHCLOCKTV LANGUAGE END :ACT I ON SELECT : SET:SET 5 3 1 1)Press to select “TV.” 2)Press SET to display SET UP TV screen. 3 3 SELECT : SET :SET END :ACT I ON SET UP TV CAPT I ON I NPUT SELECT : TUNER SET UP VIDEO/AUDIO REMOTE WARN I NG : ON DVD VOL ADJUST : + 2 FM ANTENNA : INT 1) Press to select “CAPTION”. 2) Press SET to display CAPTION screen. 4 4 CAPT I ON CAPT I ON MODE : CAP C1 CC ON MUTE : CAP C1 SET :SET SELECT : END :ACT I ON 1) Press to select CAPTION MODE. 2) Press SET repeatedly to select mode. (See left.) OFF CAP C1 TEXT C1 CAP C2 TEXT C2 5 5 Press ACTION three times to return to the normal screen. Recording and Playing Back a Closed Caption/ Text Program Record : Record normally. Closed Caption/Text signal, if present, is recorded automatically. Playback : Start playback. Do above steps to select desired caption mode. Closed Caption Mode Selections Caption Mode: CAP C1 or C2 A narration of selected TV programs is displayed. Check TV program listings for CC (Closed Caption) broadcasts. Caption Mode: TEXT C1 or C2 The lower half of the screen will be blocked out. When the TV station broadcasts information, such as program listings, it will appear in this space. Caption Mode: OFF Closed Caption /Text narration will not be displayed. NOTE : The closed caption or text signal may be broadcast over C1, C2, or both. Also, text contents can vary so you may wish to try different settings. 24 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com Caption On Mute Feature *Important: If a remote control button does not work when pressed, press the button on the remote and try the button again. Caption On Mute Feature *Important: If a remote control button does not work when pressed, press the button on the remote and try the button again. Closed Caption narration, if available, is displayed when MUTE button is pressed for silence. 1 1 Press ACTION to display MAIN MENU. 2 2 MAIN MENU DVD LOCK CHCLOCKTV LANGUAGE END :ACT I ON SELECT : SET:SET 5 3 1 1)Press to select “TV.” 2)Press SET to display SET UP TV screen. 3 3 SELECT : SET : SET END : ACT I ON SET UP TV CAPT I ON I NPUT SELECT : TUNER SET UP VIDEO/AUDIO REMOTE WARN I NG : ON DVD ...