Selects the desired title by number on some DVDs. Displays Direct Navigator. (DVD-RAM). Skips one chapter or track. Goes to next menu screen. In Stop mode, goes to counter position “0:00:00”. In Playback mode, skips over 1 to 3 minutes of tape. Creates a deeper, 3-D sound effect. Selects a different subtitle language. Enlarges specific portions of DVD picture. Resets to “0:00:00” at desired portion of tape. Returns to DVD and Video CD (Playback Control) menu screen. Selects recording speed of tape. For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:9 Getting Started ..Front View Unit Buttons 1 5 6 2 3 4 7 8 9 10 11 12 1 Built In Speakers Equipped with 2 front speakers. 2 Audio Input Connector 2 Connect from other component. (LINE 2) 3 Cassette Compartment Insert VHS tapes here. 4 Disc Tray Place compatible discs here. 5 Phones Jack Connect an ear phone or headphones. 6 Video Input Connector 2 Connect from other component. (LINE 2) 7 POWER Turns the unit on or off. 8 VCR Operation STOP/ EJECT STOP: Stops playback. EJECT: Ejects the tape. 9 PLAY/ REPEAT PLAY: Begins playback. REPEAT: Set to see a recording over and over. 10 REWIND/ SEARCH Rewinds tape and searches previous scene. Decreases slow motion speed in Still mode. 11 FAST FORWARD/ SEARCH Fast forwards tape and searches next scene. Increases slow motion speed in Still mode. 12 REC Records a program. 13 VOLUME UP/ DOWN Adjusts volume. 14 CHANNEL UP/ DOWN or TRACKING UP/ DOWN Selects a channel. Reduces picture noise during Playback and Slow Motion. ..Rear View 1 AC Power Plug When plugged into an AC outlet, this unit consumes 0.8 W of electric power in OFF condition. 2 Optical digital audio output connector Outputs audio signal. (Digital) 3 Audio Output Connector (L/R) Outputs audio signal. (Analog) 1 2 3 45 6 15 REC Indicator (RED) Lights up during recording. In Rec Pause or OTR Pause mode, the Indicator flashes. 16 ON TIMER Indicator (ORANGE) Lights when the On Timer is set. 17 PROG TIMER Indicator (GREEN) Lights up when the unit is set for Timer Recording. It flashes when a Timer Recording has been set with no tape inserted, the clock is not set, or the tape is in motion. Lights up when the On Timer is set. 18 Remote Sensor Receives infrared signal from remote control. 19 DVD Operation SKIP << Skips back one chapter or track. Goes to previous menu screen. 20 SKIP>> Skips one chapter or track. Goes to next menu screen. 21 STOP Stops playback. 22 PLAY Begins playback. 23 OPEN/CLOSE Opens or closes the disc tray. 4 Audio Input Connector 1 Connect from other component. (LINE 1) 5 Video Input Connector 1 Connect from other component. (LINE 1) 6 VHF/UHF Antenna Input Terminal Input terminal for an antenna or cable box signal. 13 14 15 16 17 18 19 20 21 22 23 10 For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:.. Antenna Connection Connect the cable from the Antenna to the VHF/UHF terminal on the unit. .. Cable Connection Connect the cable supplied by your local cable company to the VHF/UHF terminal on the unit. Overtightening “Nut type” RF coaxial cables may damage jacks. Finger tighten only. • Turn off the power supply for all com po nents before making any connections. • If the cables necessary for connecting a component to the system are not included with the component or available as an option, you may need to fashion a cable to suit the component concerned. • Read the instruction manual for each system component care ful ly before connecting it. Notes on con nec tions Connecting the RF in Terminal Note to CABLE system installer: This re mind er is pro vid ed to call the CABLE (Cable TV) System Installer’s at ten tion to Article 820-40 of the NEC that pro vides guide lines for proper grounding and, in par tic u lar, specifies that the cable ground shall be con nect ed to the ground ing system of the build ing, as close to the point of cable entry as practical. Mixer VHF Antenna UHF Antenna Or Cable Box In from CABLE CAUTION Connections Connects VCRs and other peripheral equipment .. AV Input terminal 1 is used Connecting the “1, 2” AV Input Terminals Notes: • Similar connections are available at the “1, 2” AV input terminals. • AV Input terminal 2 is located on the front of the unit. .......... ...... .......... ...... .. .. 11 Getting Started Enjoy the powerful movie theater and hall-like sound available with multiple channel audio found on DVDs by connecting an amplifier and speakers. There are two types of connection, digital and analog. Connect an AV amplifier with Dolby Digital or DTS decoders .. Digital connection Connecting the Audio Output Terminal Please see amplifier manual for speaker requirements. Speakers (example) Amplifier with built in Dolby Digital or DTS decoders. Firmly connect the cable to the connector. OPTICAL OPTICAL Connect a Digital ampli...
)
