Оценок - 1, средний балл: 4
(
)
)
|
Фрагмент инструкции
93 Magnavox ............................................. 94, 95 Uniden ................................................... 94, 95 Optimus ................................................ 94, 95 Panasonic ................................................... 96 ProScan ...................................................... 97 RCA ............................................................. 97 SONY .................................................. 98, 105 VCR Operation Important Notes • Due to changes in infra-red commands used by manufacturers, some brands have several codes. If your unit does not respond to the first code, please try the next one. • Some TV, Cable Box and DSS Receiver brands require you to turn on the power manually. 29 Tape Operation Search System For each recording, an invisible index mark is placed on the tape. A program index and information are also included for timer recordings. These marks are used to access or scan recordings. Index Search Program End Search 1 INDEX SEARCH ENTER INDEX NUMBER :1 USING 19 KEYS FORWARD SEARCH :FF REVERSE SEARCH :REW NEXT :SEARCH EXIT :STOP INDEX SEARCH FORWARD SEARCH : FF REVERSE SEARCH : REW Press SEARCH* to display SEARCH in Stop or Play mode, and then press NUMBER keys to select recording number. • To calculate number, see below. Press FF/SLOW+ or REW/SLOW-on the remote to start search. Play begins at search end. To search forward or back 1 index, press FF/SLOW+ or REW/SLOW-on the remote while screen left is displayed (10 sec.). • To cancel, press PLAY or STOP. To Calculate Index Number Example 1: To go to rec. 2 from rec. 4, enter 3 and press REW. 61 5 72 3 4 1 1 Locates end point of recording for continuity. Press SEARCH twice to display SEARCH in Stop or Play mode. 2 PROGRAM END SEARCH SEARCH START : FF EXIT :SEARCH Press FF/SLOW+ on the remote to start PROGRAM END SEARCH. • To cancel, press PLAY or STOP. INDEX Examples of Program End Search. Fig. 1 the current tape position Program 2 or BLANKProgram 1 INDEX Press SEARCH button End Point FF Fig. 2 Program 2Program 1 INDEXBLANKBLANKthe current tape position Press SEARCH button FF End Point Fig. 3 the current tape position Press SEARCH button If search exceeds a few seconds in BLANK area. Program 2Program 1 BLANKINDEX FF End Point Example 2: To go to rec. 6 from rec. 2, enter 4 and press FF. 1 753 4 62 NOTE: indicates start points of each recording. Note • If Index Search is started very close to an index mark, that index mark may not be counted in the search. Upon locating end point, . ..... search continues 7 sec. past end point, . ..... tape rewinds to 10 sec. before end point, . ..... tape plays to end point and stops. Note • If Program End Search is started very close to an index mark, that mark may be skipped over. 30 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com *Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again. Auto Operation Functions Auto Play Insert a tape . Power comes on, . Play starts if no record tab (see p. 6). Auto Rewind Play Fast Forward. Tape end . Rewind REW/SLOWPLAY Play Auto Eject (Repeat Play must be off) Play . ..... Tape end . ..... Rewind . ..... Tape ejects if no record tab FF/SLOW+ STOP NUMBER keys SEARCH CM/ZERO VCR fast forwards (skips) over 1~3 minutes of recorded tape. 1 Press CM/ZERO in Play mode. • The skip time can be changed by pressing CM/ZERO repeatedly as shown by the figure below. PLAY 1st Press 1 min Skip 2nd Press 2 min Skip 3rd Press 3 min Skip • No indication appears on-screen. Commercial Skip VCR Operation 31 Tape Operation (continued) Repeat Play Set to playback a recording over and over. Press ACTION* to display MENU. SELECT : EXIT : ACTION SET : SET MENU SET UP VCR SET CLOCK SET UP CHANNEL IDIOMA/LANGUE : ENGLISH VCR’S OUTPUT CH:3 Press to select “SET UP VCR,” and press SET. 3 3 REPEATREPEAT PLAY : OFF REMOTE WARN I NG : ON AUTO SHUT-OFF : OFF SELECT : SET: SET END : ACT I ON SET UP VCR Press to select “REPEAT PLAY,” and press SET to set “ON” or “OFF.” DISPLAY • Play repeats at tape end or if unrecorded portion over 30 sec. is detected. 4 4 Press ACTION twice to return to normal screen. Note • For repeat play in DVD mode, see page 42. Zero Search 1 1 To quickly return to a specified tape location. Press DISPLAY during play to display Counter. STOP ACTION SELECT SET CM/ZERO 2 2 PLAY 12 : 0 0AM 0 : 00 : 00 SP Press COUNTER RESET at desired position to reset to “0:00:00”. COUNTER RESET Continue to record, playback etc. Press STOP. 5 REW 12 : 3 0AM CH 02 0 : 30 : 30 SP STOP 12 : 3 1AM CH 02 0 : 00 : 00 SP Press CM/ZERO in Stop mode to start Zero Search. • DECK will go into FF or REW mode and stop at the last point the Counter was set to 0:00:00. 32 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com *Important: If a remote control button does not work when pressed, press th...
Эта инструкция также подходит к моделям:DVD-проигрыватели - PV-D4742 (4.55 mb)