Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
Now, go to step 4 (previous page). Notes • Please read the disc jacket for operation information. • If a single sided disc is placed in upside down, “THIS TYPE OF DISC CANNOT BE PLAYED. PLEASE INSERT A DIFFERENT DISC” is displayed. • Remove disc and press unit POWER off when not in use. • Disc continues to rotate with menu displayed even after play is done. Press STOP to clear menu display when finished with menu. TV Operation *Important: If a remote control button does not work when pressed, press the FM/TV button on the remote and try the button again. TV Operation *Important: If a remote control button does not work when pressed, press the FM/TV button on the remote and try the button again. 1 1 Press POWER* on the remote or unit. 2 2 CH08 Use CH or NUMBER keys to select a channel. 3 3 24 Press VOL + or VOL -to adjust volume. ¦ Using the 100 key When selecting CABLE channels 100 to 125 with the NUMBER keys, first press the 100 key, and then enter the remaining two digits. ¦ Rapid Tune Press R-TUNE to display the last channel you were watching. ¦ Audio Mute Press MUTE to instantly mute the sound. Press again to restore the previous sound level. ¦ Phones Connect an earphone (not supplied) or headphones (not supplied) to the Phones Jack. Check List Cable or antenna is connected. Power cord is plugged in. PHONES POWER VOL + / VOL CH Jack POWER MUTE VOL+/ CH NUMBER RAPID keys TUNE 100 Key LIGHT TITLE MENU DISPLAY ADD/DLT PAUSE DSS CABLE +SKIPSKIP PLAY STOP SLOW/SEARCH + VOL CH CH VOL 10 SUB TITLEANGLE ZOOM AUDIO OPEN/CLOSE CLEARENTER MUTE TIMER R-TUNE ACTION RETURN D V DFM/TV S E T SURROUND For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.comFor assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com MTS Broadcast/TV Stereo System MTS Broadcast/TV Stereo System Equipped with -TV Noise Reduction for true MTS reproduction. -TV Noise Reduction is required for good stereo separation and audio fidelity. is a registered trademark, and is licensed by Technology Licensing. DISPLAY AUDIO LIGHT TITLE MENU DISPLAY ADD/DLT PAUSE DSS CABLE +SKIPSKIP PLAY STOP SLOW/SEARCH + VOL CH CH VOL 10 SUB TITLEANGLE ZOOM AUDIO OPEN/CLOSE CLEARENTER MUTE TIMER R-TUNE ACTION RETURN D V DFM/TV S E T SURROUND Receivable Broadcast Types The following are possible audio broadcast types and on-screen displays. The signal being received is indicated with an “ ” mark while the selected audio mode is indicated with an arrow. To change the audio mode for these broadcasts, see the “Audio Mode for TV Viewing” section below. Press DISPLAY to display the broadcast signal being received. 12 : 0 0AM CH08 STEREO SAP MONO 12 : 0 0AM CH08 STEREO SAP MONO STEREO SAP MONO 12 : 0 0AM CH08 MTS Stereo and SAP broadcast Multi-channel Television Sound Stereo (main language) and Secondary Audio Program (sub language) broadcasts are being received simultaneously. Select the STEREO or SAP audio mode. MTS Stereo broadcast Multi-channel Television Sound Stereo broadcast. Select STEREO audio mode. • If stereo broadcast is weak and the display flickers, select MONO audio mode for possible improvement. SAP broadcast Secondary Audio Program (sub language). Select SAP audio mode for the sub language. STEREO SAP MONO 12 : 0 0AM CH08 MONO broadcast Normal monaural sound broadcast. TV Operation Audio Mode for TV Viewing Press AUDIO to select the desired audio mode as described above. (Arrow shows selection.) • Each press of AUDIO will change the audio mode as shown below. • “SAP” is selected with first press of AUDIO. < Example > Press AUDIO STEREO SAP MONO Press AUDIO Press AUDIO STEREO SAP MONO STEREO SAP MONO 19 1919 Closed Caption Mode Feature 1 Closed Caption is ... This multi-use system not only allows the hearing impaired to enjoy selected programs, but also makes useful information from TV stations available to everyone. Press ACTION* to display MAIN MENU. Closed Caption Mode Selections Caption Mode: CAP C1 or C2 A narration of selected TV programs is displayed. Check TV program listings for CC (Closed Caption) broadcasts. Caption Mode: TEXT C1 or C2 Most of the screen will be blocked out. When the TV station broadcasts information, such as program listings, it will appear in this space. Caption Mode: OFF Closed Caption/Text narration will not be displayed. 2 1) Press to select “TV.” 2) Press SET to display SET UP TV screen. 3 1) Press to select “CAPTION.” 2) Press SET to display CAPTION screen. OFF CAP C1 TEXT C1 CAP C2 TEXT C2 4 1) Press to select CAPTION MODE. 2) Press SET CAPT I ON CAPT I ON MODE : CAP C1 CC ON MUTE : CAP C1 SET :SET SELECT : END :ACT I ON MAIN MENU DVD LOCK CHCLOCKTV LANGUAGE END :ACT I ON SELECT : SET:SET 5 3 1 Closed Caption System • The closed caption or text signal may be broadcast over C1, C2, or both. Also, text contents can vary so you may wish to try different settings. SELECT : END : ACT I ON SET UP TV SET : SET CAPT I ON I NPUT SELECT : TUNER S...