Оценок - 3, средний балл: 3.7
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Alternatively, turn the unit off, disconnect the AC power supply cord, and then reconnect it. .Condensation has formed: Wait 1 to 2 hours for it to evaporate. .Check that the batteries are installed correctly. .The batteries are depleted: Replace them with new ones. .Point the remote control at the remote control sensor and operate. .Check the video or audio connection. .Check the power or input setting of the connected equipment. .Check that the DVD-RAM has something recorded on it. .While stopped, press and hold [D] and [;] on the unit and then also press and hold [<] on the unit until “Initialized” disappears from the television. Turn the unit off and on again. All settings will return to the default values. 3 – – 4 4 5 4 – – – Specific operation impossible or incorrect It takes time before play starts. .Play may take time to begin when an MP3 track has still picture data. Even after the track starts, – [MP3] the correct play time will not be displayed, however this is normal. Programmed items are not .Some items cannot be played even if you have programmed them. – played. [DVD-V] A menu screen appears during .This is normal for Video CDs. – skip or search. [VCD] Subtitle Subtitle position is wrong. .Adjust the position. (“Subtitle Position” in Display Menu) 9 No subtitles. .Display the subtitles. 8 The subtitles overlap closed .Clear the subtitles. 8 captions recorded on discs. A-B repeat Troubleshooting guide RQT7240 Point B is automatically set. .The end of an item becomes point B when it is reached. – A-B repeat is automatically canceled. .A-B repeat is canceled when you press [QUICK REPLAY]. – Picture incorrect Picture distorted. .Ensure that the unit is connected directly to the television, and is not connected through a video cassette recorder. 4 Picture size doesn’t fit the screen. .Change “TV Aspect” in “Video” tab. .Use the television to change the aspect. If your television does not have that function, change “4:3 Aspect” in Display Menu. .Change the Zoom setting. 10 9 8 The television may display .The unit and television are using different video systems. – incorrectly or colors appear [U.S.A.,\Canada,\Asia,\and]units\with\PX\printed\on\the\outer\packaging\ faded. Use a multi-system or NTSC television. [Other\areas] Use a multi-system or PAL television. .The system used on the disc doesn’t match your television. [U.S.A.,\Canada[and]units\with\PX\printed\on\the\outer\packaging\ –PAL discs cannot be played. – [Other\areas] –PAL discs cannot be correctly viewed on an NTSC television. – –This unit can convert NTSC signals to PAL 60 for viewing on a PAL television (“NTSC Disc 10 Output” in “Video” tab). Menu not displayed correctly. .Restore the zoom ratio to a1.00. .Set “Subtitle Position” in Display Menu to “0”. .Set “4:3 Aspect” in Display Menu to “Normal”. 8 9 9 Auto zoom function does not work well. .Turn off TV’s zoom function. .Use the other preset aspect ratios or manual adjustment. .Zoom function may not work well, especially in dark scenes and may not work depending on the type of disc. – 8 – Progressive video There is ghosting when .Change “Video Output Mode” in Picture Menu to “480I”. This problem is caused by the editing 9 progressive output is on. method or material used on DVD-Video, but should be corrected if you use interlace output. Pictures not in progressive .If the unit is connected to the television through VIDEO OUT or S VIDEO OUT, output will be – output. interlace. .Select “Enable” in “Progressive Out (Component)” in “Video” tab. Then, select “480P” in “Video 9, 10 Output Mode” in Picture Menu. Closed captions not displayed. .When progressive output is on, closed captions will not be displayed. – 12 Sound incorrect Page Sound distorted. .Select “Off” in “Advanced Surround”. .Select “On” in “Attenuator” in Audio Menu if it causes distortion with AUDIO OUT connections. .Noise may occur when playing WMA files. 6 9 – Piercing noise comes from the speakers. .If you have connected a digital amplifier which does not include decoder, be sure to select “PCM” in “Dolby Digital”, “DTS Digital Surround” or “MPEG§” in “Audio” tab. 10 Effects do not work. .None of the audio effects work when the unit is outputting bitstream signals from the DIGITAL AUDIO OUT terminal. In this case, connect with the AUDIO OUT terminal. .Some audio effects do not work or have less effect with some discs. .Advanced surround does not work if you have changed the play speed. 4 – – Recording Cannot record to digital recording equipment. .You cannot record WMA/MP3. .You cannot record DVDs that have protection preventing digital recording. – – (Incorrect sound recorded.) .You cannot record DVDs if the recording equipment cannot handle signals with a sampling – frequency of 48 kHz. .Make the following settings: – Advanced Surround: Off 6 – PCM Digital Output: Up to 48 kHz – Dolby Digital/DTS Digital Surround/MPEG§: PCM 10 10 Unit displays “noPLAy” .You inserted a disc the unit cannot play; insert one it can. .Yo...