Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
•Do not drop, stack, or impact discs. Do not place objects on them. •Do not use the following discs: – Discs with exposed adhesive from removed stickers or labels (rented discs, etc). – Discs that are badly warped or cracked. – Irregularly shaped discs, such as heart shapes. •Do not place in the following areas: – In direct sunlight. – In very dusty or humid areas. – Near a heater. – Locations susceptible to significant differences in temperature (condensation can occur). – Where static electricity or electromagnetic waves occur. •To protect discs from scratches and dirt, return them to their cases or cartridges when you are not using them. Note about using a DualDisc The digital audio content side of a DualDisc does not meet the technical specifications of the Compact Disc Digital Audio (CD-DA) format so play may not be possible. The manufacturer accepts no responsibility and offers no compensation for loss of recorded or edited material due to a problem with the unit or recordable media, and accepts no responsibility and offers no compensation for any subsequent damage caused by such loss. Examples of causes of such losses are •A disc recorded and edited with this unit is played in a DVD recorder or computer disc drive manufactured by another company. •A disc used as described above and then played again in this unit. •A disc recorded and edited with a DVD recorder or computer disc drive manufactured by another company is played in this unit. RQT8009 5 Control reference guide Remote control Getting started Main unit Disc tray (. page 15, 20) Connection for camcorder, etc.Display (. below) (. page 17) POWER button (POWER 8) (. page 10) Press to switch the unit from on to standby mode or vice versa. In standby mode, the Stop (. page 16, 21) unit is still consuming a small amount of Start play (. page 20) power. Start recording (. page 15) /Remote control signal sensor RECOPEN/CLOSE IN2 CH Open/close disc tray (. page 15, 20) Channel select (. page 15) How to open the front panel Apply your finger to the section and push down towards the bottom. Rear panel terminals (. page 7, 8) The unit’s display D. MIX (multi-channel DVD-Audio only) When lit: Down-mixing audio is played. When off: The disc prevents down-mixing so only Channel Disc type RQT8009 Main display section Recording mode Scheduled recording indicator D.MIX XPCH AVCD RW+SP RAM LP EP VR DVD the two front channels can be played. Recording Playback Recording/ Playback Turn the unit on (. page 10) Input select (IN1, IN2 or IN3) Select channels and title numbers, etc./ Enter numbers Cancel Basic operations for recording and play Show Top menu/Direct Navigator (. page 20, 22, 26) Show sub menu (. page 23, 26, 29) Show on-screen menu (. page 24) Show scheduled recording list (. page 19) Change recording mode (. page 15) Start recording (. page 15) Open/close disc tray (. page 15, 20) Show SETUP menu (. page 11, 34) TV ADD/DLT OPEN/CLOSE SKIP SLOW/SEARCH REC MODE ERASEREC POWER F Rec TIME SLIP FUNCTIONSDIRECT NAVIGATOR TOP MENU RETURN VOLUME CHINPUT SELECT STATUS DISPLAY SUB MENU DVD POWER TV/VIDEO SETUP CREATE CHAPTER SCHEDULE CM SKIP AUDIO CANCEL VCR Plus+ Television operations (. page 14) Channel select (. page 15) Select audio (. page 16, 20) Skip a minute forward (. page 21) Show VCR Plus+ screen (. page 18) Show FUNCTIONS window (. page 25) Selection/Enter, Frame-by-frame (. page 10, 21) Return to previous screen Show status messages (. page 25) Skip the specified time/Display the television image as a picture-in-picture (. page 16, 21) Erase items (. page 21) Add/delete channel (. page 11) Start Flexible Recording (. page 17) Create chapters (. page 21) RQT8009 7Getting started STEP 1 Connection •The equipment connections described are examples. •Before connection, turn off all equipment and read the appropriate operating instructions. •Peripheral equipment and optional cables sold separately unless otherwise indicated. The connection will allow the video cassette recorder to be used for playback when this unit is turned off. For optimum operation, it is recommended that this unit be connected as shown below. ¦When the unit is not to be used for a long time To save power, unplug it from the household AC outlet. This unit consumes a small amount of power, even when it is turned off (approx. 8.2 W). Do not connect the unit through a video cassette recorder Video signals fed through video cassette recorders will be affected by copyright protection systems and the picture will not be shown correctly on the television. •When connecting to a television with a built in VCR, connect to the input terminals on the television side, not the VCR side. ¦Quick Start (. page 32) A few seconds after turning on the unit, you can start recording to DVD-RAM. A few dozen seconds after turning on the unit, you can play a disc or start recording to discs other than DVD-RAM. Connection with a television and video cassette recorder VHF/UHF RF IN VHF/UHF RF OUT AUDIO R AUDIO...