Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
The QD-DVD MultiDrive duplicator will be in Copy mode when it is turned on. The display will read: 1. Copy Place your master disc into the DVD reader drive (top). Place your blank media into the DVD recorder drives. Press the ENT button on the controller interface. The data will now be copied to the blank discs. Copying – 16x 48% 2.3GB 03:15 When the job is completed, the recorded discs will be ejected from the recorder drives. The display will read: 1.0 Copy OK: 07 NOTE: CD masters must be copied to CD media, and DVD masters must be copied to DVD media. Test The Test function is used to simulate copying your master disc to the blank media. To use the Test function, press the Ў button on the controller until Test is displayed: 2. Test In Test mode, the blank media will remain blank and can be used again. Place your master disc into the DVD reader drive (top). Place your blank media into the DVD recorder drives. Press the ENT button on the controller interface. The duplicator will now simulate writing to the blank discs. Testing – 16x 48% 2.3GB 03:15 When the job is completed, the recordable discs will be ejected from the recorder drives. The display will read: 2.0 Test 8 OK: 07 Test & Copy The Test and Copy function will perform both operations, one after the other. If the Test portion passes without errors, the system will automatically start the Copy process. To run the Test and Copy function, press the Ў^ buttons until the display reads: 3. Test & Copy Place your master disc into the DVD reader drive. Place your blank media into the DVD recorder drives. Press the ENT button on the controller interface. The duplicator will now simulate writing to the blank discs. Testing – 16x 48% 2.3GB 03:15 When this operation completes, the unit will start the Copy process: Copying – 16x 48% 2.3GB 03:15 When the job is completed, the recorded discs will be ejected from the recorder drives. The display will read: 3.0 Copy OK: 07 Verify The Verify function will check to see if the recorded discs can be read. This is different from the Compare function. The Verify function will not compare itself with the master disc. It is only checking to see if the discs that were recorded can be read back. To run the Verify function, press the Ў^ buttons until the display reads: 4. Verify Place the copied discs into the DVD recorder drives. Press the ENT button on the controller interface. The copied discs will now be read. Once completed, the display will show: 4. Verify OK: 07 9 Compare The Compare function is used to compare the master disc with the copied discs. The Compare function will only work with Data masters. If your master disc has audio or video (VCD) on it, the Compare function will not work. To use the Compare function, press the Ў^ buttons until the display reads: 5. Compare Place your master disc into the DVD reader drive. Place your copied discs into the DVD recorder drives. Press the ENT button on the controller interface. The duplicator will now compare the copies to the master disc. When completed, the display will read: Compare OK: 7 Fail: 0 Diff: 0 Press the Ў button and the following screen will appear: Src:01 CD-RW Total: 15.2MB Press the Ў button again and the following screen will appear: Tgt: 00 CD-RW Identical Prescan The Prescan function is used to verify the master disc can be read correctly. To use the Prescan function, press the Ў^ buttons until the display reads: 6. Prescan Place the master disc into the DVD reader drive and press ENT. The Prescan starts and the following screen appears: Scaning – 16x 46% 2.3GB 03:15 Once the scanning is complete, the following screen will appear: PreScan OK! 10 Disc Info The Disc Info function displays information on the type of master disc placed in the DVD reader drive. To use the Disc Info function, press the Ў^ buttons until the display reads: 7. Disc Info Place the master disc into the DVD reader drive. Press the ENT button. The source is analyzed. The following screen appears: Source Disc (Analyzing) The following 4 screens display a variety of information about the master disc. The screens are reached by pressing the Ў^ buttons. Total 01 Sessions Total: 04:15 Session 01 Track 01 Total 01 Tracks Total: 37.0MB Track 01 - 01 CDXA 37.0MB Edit Track The Edit Track function allows you to select multiple tracks from different master discs and place them on one Audio CD. The maximum number of tracks that can be written to the CD is 99. In the Edit Track function, there are three options: CD to CD Edit, Play Audio Track and Close Session. Play Audio Track will not function, as the reader drive does not include a headphone jack. The Edit Track functions are not applicable to DVD media. CD to CD Edit To use the CD to CD function, press the Ў^ buttons until the display reads: 8. Edit Track 1. Press the ENT button. The following screen appears: 8-01. Edit Track CD to CD Edit 2. Place the first master audio CD into the DVD reader drive. Place the blank CDs into the recorder...
Эта инструкция также подходит к моделям:DVD-проигрыватели - QD-DVD 123 (251.33 kb)
DVD-проигрыватели - QD-DVD 127 (251.33 kb)