Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
4. If you wish to record directly from the SCART or RCA jacks, repeatedly press AUX until the sock- et you wish to record from is displayed. AV 1 for recording from EURO AV1 SCART jacks on the rear of your unit. AV 2 for recording from EURO AV2 SCART jacks on the rear of your unit. AV 3 for recording from VIDEO IN and AUDIO IN (Left & Right) jacks on the front of your unit. 5. Press if you wish to record in Long Play or Standard Play. SP will produce improved picture and sound quality, however LP will provide twice as much recording time as SP. 6. Press REC (zz) on the remote to start record- ing. Press zz on your unit or press REC (zz) on the remote several times. Each successive press will increase the record time by 30 minutes until you reach a maximum of 9 hours. 7. Press X to avoid recording unwanted scenes. Press X to continue recording. Tapes can be paused for up to 5 minutes; RECP will be displayed when a tape is paused. After 5 minutes your DVD+VCR will stop recording to prevent damaging the tape or your DVD+VCR. 8. Press xx to end recording. Press EJECT ( ). Notes: If you do not wish to record on a tape (this can hap- pen quite easily by accident!) remove the protection tab on the back edge of the video cassette. It is possible to record on a video cassette with the record protection tab removed by covering the hole with self adhesive tape. Remember you can record one programme while watching another by starting your instant recording, press TV/VCR to select TV mode and then select- ing a different channel on your TV. VIDEO Plus+ Programming VIDEO Plus+ greatly simplifies entering the date, channel, start and end times of a Timer Recording by simply entering VIDEO Plus+ Code. VIDEO Plus+ Codes are published in most TV guide magazines; they can vary one to nine numbers in length. 1. Make sure that TV channels have been tuned and stored in correct VIDEO Plus+ order. Insert a video cassette with protection tab into your DVD+VCR. VIDEO PLUS+ CODE NO. - - - - - - - REC OK0~9, 2. Press VIDEO Plus+. 3. Press the numbered buttons to enter the PlusCode of the TV programme that you wish to record. If you make a mistake press F then enter the revised number. VIDEO PLUS+ CODE NO. 246876543 DELETE : 0~9, OK i REC 4. Press OK. If PLEASE CHECK is displayed it means that you have entered the wrong VIDEO Plus+ numbers, entered the VIDEO Plus+ numbers incorrectly. If “- -” is displayed, you have to enter the programme number of the station, you want to record from. PR DATE TIME12 10:~: PR-01 SP - ---- -:--~ - -:-11 1155 SP - ---- -:--~--:-SP - ---- -:--~--:-SP - ---- -:--~--:-SP - ---- -:--~--:-SP - ---- -:--~--:-SP 5. Press F or G to select the settings that you wish to revise. (PR, DATE, TIME VPS/PDC and SP). Press D or E to enter the correct information. PR DATE TIMEPR-01 12 10:11 11 55~ : SP - ---- -:--~ - -:- SP - ---- -:--~--:- SP - ---- -:--~--:- SP - ---- -:--~--:- SP - ---- -:--~--:- SP - ---- -:--~--:- SP i 6. Press G to select the recording speed. Press D or E to select the desired tape speed (SP, IP, or LP). IP mode determines how much tape is left and switches speed from SP to LP, if necessary, to complete recording the program. IP mode is not selected when VPS/PDC is ON. Check that the timer event details are correct. If you wish to record from AUDIO IN and VIDEO IN on the front or from either of the EURO SCART sockets on the back of VCR, press AUX to select for correct display (AV1, AV2 or AV3). PR DATE TIMEPR-01 12 10: ~ 11 11:55 - ---- -:--~ - -:- SP SP - ---- -:--~--:- SP - ---- -:--~--:- SP - ---- -:--~--:- SP - ---- -:--~--:- SP - ---- -:--~--:- SP i 7. If you want to make another VIDEO Plus+ recording repeat stages 2 - 7. Press i twice. If PLEASE CHECK is displayed, you have entered incorrect information and will need to re-enter the data. Press 1 11/ //I to switch your DVD+VCR power off mode. will appear in the video recorder’s display while your VCR waits to make the recording. To watch a DVD during timer recording standby mode, press 1 11/ //I and DVD to switch to DVD mode. 8. Press 1 11/ //I to end recording. Notes: Programme Delivery Control (PDC) The Programme Delivery Control (PDC) system adjusts the start and end times of a timer record event. This can be particularly useful with sports events which may run over into extra time. The PDC signal is transmitted by the broadcaster and this controls your video recorder’s timer. Currently only a limited number of TV companies transmit PDC signals. Please make sure that when recording from channels that do not broadcast PDC that you turn PDC OFF. 24 25 Operation Timer recording using On Screen Display You may set up to seven timer record events within one month of the current date. Note: Before setting the timer make sure that you have set the DVD+VCR clock correctly and you know which stations you have tuned TV stations on your DVD+VCR. 1. Insert a video cassette with protection tab into your DVD+VCR. The video cassette should have the window...
Эта инструкция также подходит к моделям:DVD-проигрыватели - 3834RV0038A (660.2 kb)