When you try to turn the volume too high, “AVLS” flashes in the display. The volume is kept to a moderate level. To cancel AVLS Select “AVLS OFF” in step 2. Note The Mega Bass function does not operate while “AVLS” is set to “AVLS ON.” Locking the controls (HOLD) To prevent the buttons from being accidentally operated when you carry the recorder, use this function. HOLD HOLD 1 Move HOLD in the direction of the .. On the recorder, move HOLD to lock the controls of the recorder. On the remote control, slide HOLD to lock the controls of the remote control. To unlock the controls Move HOLD in the opposite direction of the arrow to unlock the controls. Connecting to a stereo system Connect the i jack of the recorder to the LINE IN jacks of an amplifier or a tape recorder with a line cable (RK-G129 or RK-G136, not supplied). The output is analog. The recorder plays the MD digitally and sends analog signals to the externally connected equipment. RK-G136 Stereo Portable DAT recorder, etc. Stereo system, etc. to LINE IN R (red) L (white) 2 phono plugs RK-G129 (not supplied) mini-plug to i (not supplied) When the recorder is connected to an another audio component through the supplied remote control. When connecting a line cable (not supplied) to the i jack of the remote control, be sure to set the “BEEP” setting to “BEEP OFF.” This keeps the beep sound out of the recorded signal or the output from the externally connected equipment. 1 Press ENTER, press