Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
Allow the memory card to slide in without force: • Check to make sure that the memory card is one that the DVD player is capable of reading. Do not attempt to insert memory cards of another type in the memory card slot! • Make sure that you have inserted the memory card into the memory card slot in the correct manner. • Under no circumstances attempt to force the memory card into the memory card slot! Otherwise the DVD player, memory card and the data on the memory card could be damaged! Supported memory card types and capacities Memory cards of the types SD (2 GB not SDHC), MS/MSPro (4 GB), MMC (4 GB) can be played back. Note: Your DVD player can only read storage mediums with several data formats if each folder contains only one data format. MultiMediaCard- /SecureDigital memory cards (MMC/SD) Insert the MMC/SD memory cards with the contacts forward and slide them straight into the memory card slot. With this the side of the memory card, on which the contacts are located must face downwards with the chamfered corner facing to the right. - 12 MemoryStick/memory cards (MS/MSPro) Slide the MS memory card into the memory card slot, level and with the contacts facing forward. With this the side of the memory card, on which the contacts are located must face downwards with the chamfered corner facing to the left. USB memory sticks (USB) The DVD player supports USB memory sticks 1.1 and 2.0 up to a capacity of 4GB. USB memory sticks must be inserted into the USB port. • Press the USB button on the remote control. If several memory mediums (USB and memory card) are inserted press, repeatedly, the USB button until the contents of the USB memory stick is displayed. This procedure also applies to particular memory cards. 11.4 Removing memory cards/USB memory sticks Memory cards/USB Memory sticks should only be removed after the memory card slot is deactivated. Thus avoiding the possibility of damage or data loss. • Press the USB button on the remote control to return to the DVD mode. For this a disc must be inserted into the DVD player. • You can now remove the memory card/USB memory stick from the memory card slot/USB port. 12. Playing back DVDs, VCDs or S-VCDs To play back a DVD/VCD/S-VCD with the DVD player... • Switch on your television. • Make sure that the DVD player is ready for operation. If the television, the DVD player and possibly other connected devices (i.e. an audio component) are ready for operation and are switched on and the DVD player is connected correctly to the television you will now see the "Silvercrest" logo on the TV screen • Open the disc tray on the front panel of the DVD player by pressing the OPEN/CLOSE button. OPEN now appears in the display on the front panel of the DVD player and on the television screen. • Insert a DVD/VCD/S-VCD disc in the disc tray with the inscribed/labled side up. • Press the OPEN/CLOSE button again to close the disc tray. CLOSE will appear in the display on the front panel of the DVD player and on the television screen while the disc tray is closing. • The contents of the inserted DVD/VCD/S-VCD will now be loaded; this may take a few seconds. In the meantime LOADING blinks in the display on the front panel of the DVD player and on the television screen. • Playback of the inserted DVD/VCD/S-VCD starts automatically. Note: DVDs, VCDs and S-VCDs that you want to playback with the DVD player may possibly have a country code which is printed on the DVD's jacket. The DVD player can only playback DVDs/VCDs/S-VCDs with the country code . If no country code is printed on the cover of a DVD/VCD/S-VCD... • but instead the symbol , then the DVD/VCD/S-VCD can be played back with the DVD player • then the DVD/VCD/S-VCD can possibly not be played back with the DVD player. You can check this by attempting to play back the DVD. Depending on the inserted DVD/VCD/S-VCD it is possible that the contents of the DVD/VCD/S-VCD will not playback immediately, rather first a selection menu appears on the television screen. In this event select the menu option, which will start the playback of the film, with the control buttons on the remote control. • To start playback of the film press the ENTER button on the remote control or press the PLAY/PAUSEbutton. - 13 In the display on the front panel of the DVD player, the following notices appear: With DVDs: • "DVD" • the number of the currently playing chapter • the played back so far time of the currently playing DVD in minutes and seconds With VCDs/S-VCDs: • "VCD" or "S-VCD" • the number of the currently playing title • the played back so far time of the currently playing VCD/S-VCD in minutes and seconds 12.1Features during playback of a DVD, VCD or S-VCD During the playback of a DVD/VCD/S-VCD you can use the following DVD player features... Pause playback To pause the playback of the inserted DVD/VCD/S-VCD... • During playback press the PLAY/PAUSEbutton • will now appear in the display on the front panel of the DVD player and on the televi...
Эта инструкция также подходит к моделям:DVD-проигрыватели - SILVERCREST KH 6524 (538.21 kb)