Войти:
Оценок - 3, средний балл: 5 ( )

Инструкция по эксплуатации Sylvania, модель RSDCD2203

Производитель: Sylvania
Размер: 1.21 mb
Название файла: 3e94898c-b513-4b87-9b52-0e37ee610227.pdf
Язык инструкции:enfr
Перейти к скачиванию



Фрагмент инструкции


VCR You can automatically program the tuner to scan only the channels you receive in your area. .Channel memory programming is NOT needed when you connect the VCR to a cable box or a satellite box as in "CONNECTING TO A TV WITHOUT A/V TERMINALS" on page 13. In this case, select channel 3 on your TV. Then, the channel you want to record or view may be selected at the cable box or satellite box. .If noise appears, change the RF output channel of the VCR to channel 4 by pressing PLAY for 3 seconds during playback. Then select the same channel (CH4) on your TV. .Follow the steps below once. Repeat only if there is a power failure or if the VCR is unplugged for more than 30 seconds. (In these cases, the programmed channels are erased.) .You must follow the steps below before attempting to play or record a video tape. If you want to play or record a video tape BEFORE programming the tuner, you can cancel it by pressing CLEAR/C.RESET. 1 You need to connect the antenna or cable to the VCR first. Then, connect the DVD /VCR power plug to a standard AC outlet. 2 Turn on the TV and set the TV to channel 3. .If noise appears, change the RF output channel of the VCR to channel 4 by pressing PLAY for 3 seconds during playback. Then select the same channel (CH4) on your TV. (See “RF OUTPUT CHANNEL” on page 13 for the detail.) 3 Turn on the VCR by pressing POWER. the POWER light will come on. 4 Select the On Screen Language (“ENGLISH”, “FRANCAIS” or “ESPANOL”) by pressing K or L. Then, press B. The tuner scans and memorizes all active channels in your area. .The VCR distinguishes between standard TV channels and cable channels. AUTO SET UP CH 01 6 After scanning, the tuner stops on the lowest memorized channel. The TV screen returns to TV mode. .If “AUTO SET UP” appears on the TV screen again, check the cable connections. Press B once again and the VCR will begin preset again. TO SELECT A DESIRED CHANNEL You can select the desired channel by using SKIP/CH. (o/p) or by directly pressing the Number buttons on the remote control. Note for using the Number buttons: .When selecting cable channels which are higher than 99, enter channel numbers as a three-digit num- ber.(For example: 117, press 1,1,7) .You must precede single-digit channel numbers with a zero (For example: 02, 03, 04 and so on). TO PRESET THE CHANNELS AGAIN 1 Press MENU until the main menu appears. (If you have already set the clock, you only have to press it once. If not, you have to press it twice). 2 Select “CHANNEL SET UP” by pressing K or L. Then, press B. 3 Select “AUTO SET UP” by pressing K or L. Then, press B. .After scanning, the tuner stops on the lowest memorized channel. –16– EN 1L25 TO ADD/DELETE CHANNELS When scanning, some channels may be skipped due to a weak signal. In such cases, you can add the channels to the VCR memory manually. 1 Press MENU until the main menu appears. (If you have already set the clock, you only have to press it once. If not you have to press it twice). - MENU - TIMER PROGRAMMING AUTO REPEAT CHANNEL SET UP CLOCK SET LANGUAGE SELECT AUDIO OUT TV STEREO [OFF] SAP [ON] 2 Select "CHANNEL SET UP" by pressing K or L. Then, press B. 3 Select "MANUAL SET UP" by pressing K or L. Then, press B. 4 Enter the desired channel number by pressing K or L. 5 Add or Delete it from memory by pressing B or s so that "ADD" or "DELETE" flashes on the TV screen accordingly. 6 Exit the Preset mode by pressing CLEAR/C.RESET. TO CHANGE THE ON-SCREEN LANGUAGE VCR 1 Press MENU twice to call up the main menu. (If you have already set the clock, you only have to press it once). 2 Select "LANGUAGE SELECT" by pressing K or L. Then, press B. 3 Select "ENGLISH", "FRANCAIS" or "ESPANOL" by pressing K or L. Then, press CLEAR/C.RESET. .If you accidentally select Spanish or French and need English: Press MENU and choose SELEC. IDIOMA, or SELECTION LANGUE. Press B, and select ENGLISH by pressing K or L. Finally, press CLEAR/C.RESET. CLOCK SET UP VCR 1 Select main menu by pressing MENU. .If the clock is not set, the CLOCK SET menu appears first. In this case, follow step [3]. 2 Select "CLOCK SET" by pressing K or L. Then, press B. 3 Set the clock. 1) Set the month CLOCK SET Press K or L repeatedly. Then, press B. 2) Set the day Press K or L repeatedly. Then, press B. 3) Set the year Press K or L repeatedly. Then, press B. The day of the week will appear automatically. 4) Set the hour Press K or L repeatedly. Then, press B. 5) Set the minute Press K or L repeatedly. Then, press B. 6) Set AM or PM MONTH DAY YEAR Press K or L repeatedly. 03 / 17 MON 2003 HOUR MINUTE AM/PM 05 : 40 PM AM PM .To go back one step, press s. 4 Start the clock by pressing CLEAR/C.RESET or B. –17– EN 1L25 PLAYBACK FUNCTION NORMAL PLAYBACK VCR 1 Insert a prerecorded tape. The VCR will turn on. .If the safety tab has been removed, the VCR will start playback automatically. 2 Turn on the TV and set the TV to channel 3. .If noise appears, change the RF output channel of the VCR to channel 4 by p...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории