Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
You also need to tune the TV to the Video Input Channel—instead of changing channels with the TV’s channel up and channel down buttons, you change channels via the DVD/VCR’s channel up and down buttons (or number buttons).The TV stays on the Video Input Channel that corresponds to the Input Jacks on the TV you used to connect the TV to the DVD/VCR. If you need help finding the TV’s Video Input Channel, go to page 19. The Main Menu Appears The main menu appears whenever you turn on the DVD/VCR.To watch TV, press the OK button when the Watch TV menu is highlighted.When you change channels, the channel banner appears to give you programming information that is available (for more information, go to page 30). Changing Channels You might notice a slight delay when you’re changing channels because the signal goes to the DVD/VCR and is then sent out to the TV. Discs for Recording Recording to DVD discs is new to many people.There are several different formats of DVD discs. For your DVD/VCR, only DVD+R 2.4x, 4x, 8x, or 16x and DVD+RW 2.4x and 4x type discs can be used for recording.A DVD+RW disc is “rewritable” which means you can use the disc over and over again (similar to how you use VCR tapes to record).Additionally, DVD+RW discs have many “digital features” for editing the disc’s content. DVD+R discs can only be used one time—you can’t record over existing programs and you must get used to “finalizing the disc” in order for other DVD players to be able to play DVD+R discs.Throughout this User’s Guide, you’ll notice that some features and menu options are only available for a specific type of disc. Make sure you use discs from a reputable manufacturer. Many problems encountered when recording (or playing) discs are related to the wide variation in disc quality due to the large number of brands and manufacturers. If you encounter problems with one brand of disc, please try another brand. VCR (Digital vs.Analog) Your VCR is equipped with two modes: digital and analog.The DVD functions always go through the digital path.There is only one digital path.Therefore, if you are using any VCR functions at the same time you’re using DVD functions, the VCR switches to the analog path. Note:The DVD/VCR will change to the analog VCR path automatically during simultaneous operations. When the VCR is in analog mode, the on-screen InfoDisplay isn’t available and the VCR menu system will look different than the menus represented in this User’s Guide. Smart Play Your DVD/VCR is an integrated product.The DVD/VCR intuitively knows whether a VCR tape or a DVD disc has been loaded, and acts accordingly when you press the PLAY button on the remote. If you have both a VCR tape and a DVD disc in the DVD/VCR, the main menu appears and you must select the appropriate media (tape or disc) by highlighting the appropriate menu (Tape or Disc) so the DVD/VCR knows what to do. Graphics contained within this publication are for representation only. Chapter 1: Connections and Setup How to find your TV’s Video Input Channel In order to see what’s playing on your DVD/VCR, you need to tune the TV to the Video Input Channel that corresponds to the Input Jacks on your TV that you used to connect the DVD/VCR to the TV.The Video Input Channel(s) varies for different brands and different models of TVs. RCA, GE, and Proscan TVs If your brand of TV is RCA, GE, or Proscan, the remote control packed with your DVD/VCR will most likely access the TV’s Video Input Channel—with the DVD/VCR turned on, press the TV button, and then press INPUT until you see the DVD/VCR’s menu on your TV screen. Other Brands of TVs Since access to a TV’s Video Input Channel varies from one manufacturer to the next, it’s difficult to provide specific instructions for your particular brand. However, a list of suggestions is provided below. • Consult the Instruction Manual that came with your TV. • If you can’t find the information in the manual, or can’t find the manual, review the following list. • There might be a button on the TV’s remote control that accesses the Video Input Channel (see table below for examples). • You might select the Video Input Channel from the TV’s menu system. • You might tune to it by pressing a specific channel number (see table below). • Press the Channel up and/or down buttons on the TV’s remote control (sometimes the Video Input Channel is stored in your TV’s channel list). Video Input Channel Variations Button/Switch Button on the Channel on the TV TV remote Number VIDEO VID1 S-VID 00 93 SIGNAL LINE INPUT 90 VID 1 VID 1 VID SOURCE 91 VID 2 VID 2 VIDEO AUX 92 INPUT SOURCE Next Steps This chapter is dedicated to connecting your DVD/VCR. Choose what you want to do next, and go to the appropriate chapter for instructions. Chapter 2:The Remote Control (page 20) A description of each button is in Chapter 2.Additionally, the universal remote control can be programmed to operate many brands and types of components. Go to page 22 for instructions. Chapter 3: R...