Оценок - 1, средний балл: 5
(
)
)
|
Фрагмент инструкции
Figure 4 Plugging into Headphone jack 1 will disable the internal speakers. * The headphones are only provided for D710PK,D7104PK. DC 9 -12V AUDIO OUT VIDEO OUT NOTSUPPLIED 2. Connecting Headphones* Simply plug the headphones into either Headphone jack 1 or Headphone jack 2 on the right side of the DVD Player. (Refer to Figure 5) Figure 5 DC 9 -12V AUDIO OUT VIDEO OUT N. Setup Press SETUP button to display the Main screen of the SETUP Menu on the screen. Press SETUP button again to exit the SETUP Menu. 1) Press SETUP, the ‘GENERAL SETUP PAGE’ will display on the screen. General Video Password Preferen Exit ENG TV Display OSD Lang Last Memory Screen Saver Wide On On Main SETUP Menu Screen Display a) Select ‘TV DISPLAY’ using the DOWN button, and then press RIGHT to enter the submenu. Select the TV display mode on the screen using UP/DOWN, and press OK to confirm the setting. Press the LEFT button to exit the TV DISPLAY menu. *NORMAL/PS: The wide-screen image will be displayed on the normal TV (4:3) in its native aspect ratio with some part on the left and right cut off. *NORMAL/LB: The wide-screen image will be displayed on the normal TV (4:3) in its native aspect ratio with black bands on the upper and lower sections of the screen. *WIDE: If the unit is connected to a wide-screen TV set, select this option. The widescreen image will be displayed in full screen in its native aspect ratio. General Video Password Preferen Exit Nor mal PS Nor mal LB / / Wide Set TV Display Mode OSD Lang ENG Screen Saver TV Display Last Memory Wide On On English (Cross-Out comment cpost 07.05.2010 19:33:01 blank) TV Display Screen Display 21 b) Select ‘OSD LANG’ using the DOWN button, and then press the RIGHT button to enter the submenu. Choose the language you desire as the display language. Press the LEFT button to return. General Video Password Preferen Exit English French Spanish Set OSD Language OSD Lang ENG Screen Saver TV Display Last Memory Wide On On OSD Language Screen Display c)Select ‘SCREEN SAVER’using the DOWN button. and then press the RIGHT button to enter the submenu. Choose Screen saver on or off using the UP/DOWN buttons and then press OK button to confirm the setting. Press the LEFT button to return. General Video Password Preferen Exit O ff Set Screen Saver On OSD Lang ENG Screen Saver TV Display Last Memory Wide On On Screen Saver Screen Display *ON: Enables screen saver. *OFF: Disables screen saver. NOTE: The DVD player will enter the Screen Saver mode after ap proximately five minutes if the same image remains on the screen. (Cross-Out comment cpost 07.05.2010 19:33:11 blank) 22 d) Select ‘LAST MEMORY’ by using the DOWN button. and then press the RIGHT button to enter the submenu. Choose Last Memory on or off using the UP/DOWN buttons and then press OK button to confirm the setting. Press the LEFT button to return. General Video Password Preferen Exit On O ff Set Last Memory OSD Lang ENG Screen Saver TV Display Last Memory Wide On On Last Memory Screen Display *ON:During playback or in the pause mode, if you open the disc tray and then close without changing a disc, the unit will memorize the last playback status and resume playback from the memorized point. *OFF:The unit will not return to the last position on the disc. English (Cross-Out comment cpost 07.05.2010 19:36:54 blank) 23 2) Select ‘VIDEO SETUP PAGE’ by using the LEFT/RIGHT buttons, press OK button to enter the VIDEO SETUP PAGE. General Video Password Preferen Exit Brightness Contrast 00 00 .. ..Video Setup Page Go To Video Setup Page Video Setup Page Screen Display a) Select ‘BRIGHTNESS’ by using the UP or DOWN button, then press OK button. Adjust the Brightness by pressing the LEFT or RIGHT button. To exit Brightness Setting, press OK button again. General Video Password Preferen Exit Brightness Contrast 00 00 Set Brightness .. ..Video Setup Page Brightness Screen Display b) Use the same way as setting BRIGHTNESS to set the other items on this menu. Press LEFT button to exit the VIDEO QUALITY SETUP menu. General Video Password Preferen Exit Brightness Contrast 00 00 Set Contrast .. ..Video Setup Page (Inserted Text comment cpost 07.05.2010 19:52:53 blank) (Cross-Out comment cpost 07.05.2010 19:52:53 blank) Contrast Screen Display 24 3) Select ‘PASSWORD’using the LEFT or RIGHT buttons, then press the OK button to enter the submenu. General Video Preferen ExitPassword Go To Password Setup Page Password .. ..Password Setup Page Password Setup Page Screen Display Press OK button twice to enter the PASSWORD CHANGE PAGE. Input the Old Password or the Default Password, the New Password, and the Confirmed New Password. Press OK button to confirm the change. General Video Preferen ExitPassword O ld Passw ord New Password Confirm Pwd OK Password Change Page Screen Display NOTE: The Default Password is LEFT,LEFT,RIGHT,RIGHT( ). This password is always effective even after you have selected your own password and changed it. To avoid the possibility of ot...
Эта инструкция также подходит к моделям:DVD-проигрыватели - D710 (403.46 kb)
DVD-проигрыватели - D7104PK (403.46 kb)
DVD-проигрыватели - D710PK (403.46 kb)