Оценок - 2, средний балл: 5
(
)
)
|
Фрагмент инструкции
When using these devices the volume must be adjusted with the wireless headphone volume control or with your radio’s volume control (see page 16, Wireless Headphones, or page 17, Wireless FM Modulator). 23. Three position Dome Light Switch • Auto – Automatically switches on the dome lights in conjunction with the vehicle’s interior illumination. • Off – The dome lights will not turn on in this position. • On – Turns on the dome lights. Note : Audiovox recommends the use of the Audiovox HP275 Headphones when using wired headphones. -6 128-7252A 6 of 35 128-7252A 7 of 35 -7- Battery Installation Before attempting to operate your Remote Control, install the batteries as described below. 1) Turn the Remote Control face down. Using a fingernail, lift the battery cover off. 2) Install two “AAA” batteries as shown. Make sure that proper polarity (+ or -) is observed. 3) Align the cover tabs with the remote control and press down until the cover clicks. The remote control will operate the ADV200 and most Audiovox VCP’s. It is not a universal remote control and will not control equipment from other manufacturers. Remote Control Operation 1 2 3 4 5 7 6 8 9 10 11 12 13 14 15 16 17 18 19 20 21 23 22 24 25 26 27 28 29 30 31 32 34 33 35 36 37 38 39 40 41 42 BATTERY COVER Remote Control Function Descriptions *Function control is available on the unit and the remote control. ** Not used in this model *** The TV Option will only be displayed and the TV control functions are only available if the optional TV Tuner (P/N PODTVT) is installed. 1. POWER Button* Press this button to turn the ADV200 on. Press the button again to turn the ADV200 off. 2. SOURCE Button* Each time the button is pressed, the audio / video source will change: DVD, AV1, AUX and TV***. 3. AUTO MEMORY Button (AUTO PROGRAM Button)*** When the AUTO MEMORY button is pressed, all channels are searched and channels that are detected with signals of sufficent levels are automatically stored. 4. SKIP/SEARCH Button*** This button selects betweeen SKIP and SEARCH mode. In “SKIP mode” the TV tuner will tune and stop on channels that are programmed into memory when CHANNEL UP/DOWN buttons are used. When the SKIP mode is disabled, the TV will stop on all active channels. 5. ERASE/WRITE Button*** While tuned to a channel, pressing this button will store or erase the channel from memory. The stored channel numbers are displayed in “GREEN” and the erased channel numbers are displayed in “RED”. 6. Channel Up ( ) Button Use this button to increase the channel number*** to the desired channel and to scroll upward in menu options. -8 128-7252A 8 of 35 7. MUTE Button Press this button to mute the audio. Pressing the button again restores the sound to the previously set level. 8. ENTER Button Used to implement a selected setting or menu option. 9. LEFT ( ) Button Allows the user to shift left in the menu options. 10. MENU Button Allows the user to access the main menu. 11. RETURN Button** 12. TV Mode Select Button*** Switches certain function keys on the remote control for TV functions. 13. DVD Mode Select button Switches certain function keys on the remote control for DVD functions. -9 128-7252A 9 of 35 14. DISPLAY Button Press to display DVD Disc current information. Press DISPLAY button DVD Player Perform Once Twice 3 times 4 times 5 times 6 times 7 times 8 times Display current TITLE , CHAPTER & elapsed timeDisplay current SUBTITLEDisplay current AUDIO language & channel Display current surround mode Display current ANGLEDisplay A-B current statusDisplay REPEAT current statusDisplay off For Subtitle, Audio, Surround, Angle, A - B & Repeat, press Enter key repeatedly to change the options. These options may vary from disc to disc. 15. FM TRANSMITTER ON/OFF Button Turns FM Modulator power on/off. 16. AUDIO Button Press this button to display and select the desired AUDIO language. Each time the button is pressed, the language or track changes. NOTE: The languages & tracks you can select are vary from disc to disc. -10 128-7252A 10 of 35 17. ZOOM Button – Press this button to zoom the picture Press ZOOM button OSD DVD Player Perform Once Twice 3 times 4 times 5 times 6 times 7 times 1 X 2 X 3 X 1/2 1/3 1/4 OFF ZOOM picture 2 timesZOOM picture 3 timesZOOM picture 4 timesReduces picture to 1/2 normal size Reduces picture to 1/3 normal size Reduces picture to 1/4 normal size Returns to normal size 18. PAUSE ( ) Button Allows the user to pause the playback. 19. STOP () Button* Disc playback will be stopped. 20. PREVIOUS ( ) Button Allows the user to return to the previous chapter or track. 21. NEXT ( ) Button Allows the user to skip to the next chapter or track. 22. REV ( ) Button Allows the user to search in a backward direction at 2, 4, 8, 16 and 32 times the normal speed. -11 128-7252A 11 of 35 23. FWD ( ) Button Allows the user to search in a forward direction at 2,4,8, 16 and 32 times the normal speed. 24. PLAY ( )Button* Press this button to activate the play mode when a d...
Эта инструкция также подходит к моделям:DVD-проигрыватели - ADV200B (391.05 kb)
DVD-проигрыватели - ADV200S (391.05 kb)