Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
Press the DVD/SD-USB button the appropriate position. Then you can: 1) Insert an SD Card into the SD Slot on the front of the unit. 2) Insert a Thumb Drive into the USB jack on the left side of the unit. 3) Connect the USB cable (not supplied) from a camera into the USB port on the left side of the unit. * * O. Setup 1. General Setup Page 1)With no disc inside the player, press ‘SETUP’to display the Main screen of the Setup Menu on the screen and “General Setup Page” appears. At the same time, “ ” is highlighted. Press ‘SETUP’ again to exit the Setup Menu. 2)Press the ENTER button, “TV Display” is highlighted. 3) Press the or buttons to select the other menus in general setup page. 4) Press to enter the sub menu. 5) Press the or button to select the desired option in the sub menu and press the ENTER to confirm your selection. 6) Repeat steps 3-5 for other menus. Note: Press to return the previous menu. a) TV Display * Normal/PS: When the player outputs signal to a normal TV, a normal picture is shown on the full screen. * Normal/LB: When the player outputs signal to a normal TV, a normal picture is shown on the screen with a black strip at both the top and bottom of the screen. * Wide: When the player outputs signal to a wide screen TV, a wide picture is shown on the full screen. b).Angle Mark * On: The screen will show the angle mark icon. (*If an angle option is available). * Off: The screen will not display the Angle Mark NOTE: Not all discs contain above features. The above features are disc dependent. c) Screen Saver *On: Enables screen saver *NOTE: The DVD player will enter the Screen Saver mode after approximately three minutes if the same image remains on the screen. *Off: Disables screen saver (off) 20 d) Last Memory *On: The unit will return to the last position on the disc. *Off: The unit will not return to the last position on the disc. Note: The Last position memory function will only work when the disc tray is OPEN or the AV In/Out is switched. 2.Video Quality Setup 1)In Setup menu, Press the or button to select “Video Quality Setup” and is highlighted. Press ENTER to enter the video quality setup page. 2)Press the ENTER button, “Brightness” is highlighted. 3)Press the or button to select the other options in the video quality setup page. 4) Press to enter the sub menu. 5) Press the or button repeatedly to adjust the selected option and press ENTER to confirm your selection. 6) Repeat steps 3-5 for other menus. Note: Press to return the previous menu. a) Brightness b) Contrast c) Saturation d) Hue 3. Password In the Setup menu, Press the or button to select “Password Setup Page” and is highlighted. Press ENTER to enter the password page. Press ENTER twice to enter the Password Change Page. Input the Old Password or the Default Password, the New Password, and Confirmed the New Password. Press ENTER to confirm the change. Note: The default password is 3308. 4. Preference Page 1) In Setup menu, Press the or button to select “Preference Page”and is highlighted. Press ENTER to enter the preference page. 2) Press the ENTER button, “Audio” is highlighted. 3) Press the or button to select the other options in the preference page. 21 4) Press to enter the sub menu. 5) Press the or button to select the desired option and press ENTER to confirm your selection. 6) Repeat steps 3-5 for other menus. Note: Press to return the previous menu. a) Audio b) Subtitle c) Disc Menu Note: Language and subtitle selection is only available for discs that are recorded in the above listed languages. If the selected language is not available, the player will play and display on the screen the original recorded language contained in the disc. d) Parental Select ‘Parental’ using the and button, then press RIGHT to enter the submenu. Select the parental level you desire using and the button for discs with lock-out function or multiple rating levels. These are listed from the lowest level (1 Kid Safe) to the highest level (8 Adult). Press ENTER and input 4 digit password, then press ENTER again to confirm the parental level setting. NOTE: The level of 8 Adult is the factory default. e) Default Select ‘Default’ using the and button, then press to enter the submenu. Press ENTER to make all of the settings return to the factory set mode. NOTE: The parental setting and the password setting are not affected by the default reset function. NOTE: The Default Password is 3308. This password is always effective even after you have selected your own password and changed it. To avoid the possibility of others using the default password to set the parental level and change the password, you can record this default password in another area and delete it from this manual. Some discs can be limited depending on the age of users while some discs cannot. 22 P. Specifications Compatible DISC: DVD/CD/MP3 Signal system: NTSC Panel size: 10.2 inch Frequency response: 20 Hz to 20 kHz Video output: 1 Vp-p/75 Ohm, unbalanced Audio output: 1.4Vrms/10k...