Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
PLAY/PAUSE BUTTON 17. POWER ON/OFF SWITCH 18. SD/MMC CARD SLOT 19. USB PORT 20. PHONES JACK 21. AUDIO/VIDEO OUT JACK 22. DC IN JACK ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) II 1 2 3 4 5 6 7 8 20 19 18 17 16 15 14 13 12 11 10 9 REMOTE CONTROL UNIT * Rating label is located at the bottom of the unit. OVERVIEW OF THE DVD PLAYER: 1 2 3 4 5 6 7 8 10 12 14 16 9 11 13 15 17 18 19 20 21 22 23 3 OPERATION PREPARATION Power on the TV set and select video input mode. Power on the audio system which is connected to the player 1. Slide the POWER ON/OFF switch to turn on the player. 2. Press the disc cover OPEN key to open the disc cover, and then place the disc onto the disc tray. 3. Close the disc tray and the playback starts automatically. 4. When the DVD menu screen appears, use the navigation buttons to select a preferred chapter number, then press the OK (PLAY/PAUSE) button to start playback. Press the PREVIOUS or NEXT button once during play to skip a chapter (DVD) or a track (CD) ahead or backwards. During playback, press and hold the FAST FORWARD or FAST BACKWARD button several times to scan the disc forward or backward at X2, X4, X8, X16, X32 normal speed. Press the PLAY/PAUSE button to resume normal play. Press the STOP button during playback to stop playback. The player activates its resume function when STOP is pressed in STOP mode. Press the PLAY button again, playback resumes at the point it stopped previously. Open the disc tray or press the STOP button one more time to clear the resume function. Press and hold this button to make change between DVD, C R and USB. Press and hold the ZOOM/SLOW button on the remote control during playback, the Disc will play at 1/2 normal speed. Each time this button is pressed, the play speed becomes slower at 1/4,1/8, and 1/16 speed. Press the REPEAT button during playback, it will repeat play one chapter/title or repeat all (for DVD disc), or repeat play a track or all tracks (CD), or repeat the sections between two specific points (A-B). GETTING STARTED ADJUSTING THE VOLUME MUTE SKIP AHEAD OR BACK ( ) Press the VOLUME +/- button on the remote or press and hold these two buttons on the unit to increase or reduce the volume level. During playback, press the MUTE button to shut off the audio output of the unit. Press it again to resume normal play. ( ) ( ) ( ) ( ) OK ( ) ( ) ( ) ( ) ( ) s AD, II II FAST FORWARD OR BACKWARD STOP PLAYBACK SLOW-MOTION PLAY (DVD) REPEAT CONNECTING THE DVD PLAYER TO OTHER DEVICES When connecting the DVD Player to a TV, ensure that the DVD Player and other devices (TV set and/or amplifier) to be connected to the DVD player are set to OFF. Do not block ventilation holes of any of the equipment and arrange them so that air can circulate freely. Read through the instructions before connecting other equipment. . Note: During DVD play, the TV volume may be at a lower level than during TV broadcasts, etc. If this is the case, adjust the volume to the desired level. If the DVD/CD player is connected to the TV through a video cassette recorder, the picture may not be played back normally with some DVDs. If this is the case, do not connect the player via the VCR. Observe the color coding when connecting audio and video cables, for instance connect yellow plug to the yellow jack, the red plug to the red jack and so on. If the A/V connected cable is only supplied, please link one end of the A/V connected cable with A/V cable according to the color coding, and connect the other end of the A/V connected cable to the unit, finally connect the AV cable with TV set After connecting the DVD player to another device, plug the AC ADAPTER to an applicable wall outlet and turn on the player. CONNECTING TO THE VEHICLE DC ADAPTOR The vehicle power adaptor is designed for use with vehicles that have a 12V, negative ground electrical system. CAUTIONS: Use the unit only with the recommended vehicle power adaptor, use with other vehicle powers adaptor could damage the unit. The recommended vehicle power adaptor is for use with this unit only. Do not use it with other equipment. In the interests of road traffic safety, do not operate the unit or view video software while driving a vehicle. Make sure the unit is fastened securely to prevent it from moving around the vehicle in an accident. To the vehicle DC accessory socket AUDIO R AV AUDIO/VIDEO INPUT A/V cable AUDIO L VIDEO IN S-VIDEO YUV INPUT TV SET After use, disconnect the vehicle power adaptor from both the unit and vehicle DC accessory socket. FUSE REPLACEMENT FUSE POSITIVE (+) CAP Note: Don't throw out the positive (+) cap when replacing the fuse. Connecting to a stereo TV set 4 SEARCH FOR A SCENE 1. Press the SEARCH button several times during p lay to show different Search modes . 2. Input the desired number or time via the numeric buttons. 3. Press the OK (PLAY/PAUSE) (II) button to confirm and the playback from the located scene starts. 4. The Search menu will automatically clear if no but...