Оценок - 1, средний балл: 4
(
)
)
|
Фото и характеристики Samsung DVD-R125 |
К этому устройству также есть другие инструкции:
Фрагмент инструкции
NOTE white red white red 22- English If the input is not selected automatically, use INPUT button to select proper input. NOTE Case 2 : Connecting a Camcorder to the DV IN jack If your digital camcorder has a DV output jack, connect it to the DV input jack of your DVD Recorder. Camcorder Connecting & Setting Up This allows you to connect your DVD Recorder to other external devices and view or record their outputs. Case 1 : Connecting a VCR, Set-Top Box(STB), DVD recorder or Camcorder to the AV3 IN jacks Case 2 : Connecting a DV Device to the DV IN jack Case 1 : Connecting a VCR, Set-Top Box(STB), DVD recorder or Camcorder to the AV3 IN jacks Connecting a VCR or external device to AV3 IN jacks of the DVD Recorder. You can record from connected equipment (VCR, STB, DVD recorder or Camcorder). Connecting to AV3 IN, DV input jack AV 3 in selection will be automatically done. If the input is not selected automatically, use INPUT button to select proper input. Copy protected content cannot be recorded. NOTE DVD STB VCR Camcorder yellow white red yellow white red System Setup System Setup On-Screen Menu Navigation The on-screen menus allow you to enable or disable various functions on your DVD Recorder. Use the following buttons to open and navigate through the on-screen menus. RETURNOKMOVE EXIT Timer RecordNo Disc Video Plus+ vv Timer Record vv Video Plus+ Extended : Off vv Programme Setup RETURNOKMOVE EXIT Disc NavigationDVD-RAM(VR) Title List vv DivX vv Photo vv Music vv Disc Navigation Playlist Disc manager Programme Setup System Setup On-Screen Menu Navigation......................23 Plug & Auto Setup......................................24 Setting the Clock ........................................25 Presetting Channels with the Auto Setup function..............................26 Presetting Channels with the Manual Setup function .........................27 Setting up the Language Options ..............28 EP Mode Time Setting ...............................29 Automatic Chapter Creation.......................30 Setting up the Front Display Options .........31 Setting up NICAM Options.........................31 DivX(R) Registration...................................32 Setting up the Audio Options .....................32 Setting up Video Output Options................33 Setting up the Progressive scan ................34 Canceling the Progressive scan.................35 Setting up the Display(Video) Options .......35 Setting up the Parental Control..................37 1 1 MENU Button Press this button on the remote control to open the on-screen MENU. Press again to exit the on-screen MENU. 2 2 … ……† ††, oe oeoev vvButtons Press these buttons on remote control to move the selection bar …†, oevto cycle through the menu options. 3 3 OK Button Press this button on the remote control to confirm any new settings. 4 4 RETURN Button Press this button on the remote control to return to the Previous MENU screen displayed or to exit the on-screen MENU. English -23 Plug & Auto Set up (Connecting Your DVD Recorder to the TV Using the RF Cable and scart cable.) 2 2 Plug the DVD Recorder into the mains. “AUTO” in the front panel display flickers. 3 3 Start the auto setup. Auto setup will be started. Check antenna and TV cable connection. OK Cancel 4 4 Auto Channel scan will be started. Channel scan Now, Scanning. 5% • The number of stations automatically stored by the DVD Recorder depends on the number of stations that it has found. System Setup 5 5 After Auto Channel Scan is completed, Auto Clock Setting will be started automatically in 10 seconds. If you want to start Auto Clock Setting immediately, press OK button. If you do not want to do Auto Clock Setting, press CANCEL or MENU button. Your DVD Recorder will automatically set itself up when it is plugged in for the first time. TV stations and clock will be stored in memory. The process takes a few minutes. Your DVD Recorder will then be ready for use. 1 Connect the RF cable as indicated on page 17. Auto channel scan completed successfully. Press [OK] button to auto clock set. OK Cancel 6 6 Wait until current date and time are displayed automatically. If you want to exit Auto clock setting, press MENU button. Please wait. Now setting the clock. If you want to exit clock setting, press the [MENU] button. 7 7 Check the date and time. RETURNOKMOVE EXIT Clock SetNo Disc 12 : 00 01 / JAN / 2005 SAT On Time Date Auto Clock Programme Setup • if it is : Correct, press OK button then the date and time will be saved. If you don't press the OK button, the date and time will be saved automatically after 5 seconds. • if it is : Incorrect, input correct Time, Date, Year using †…oe v buttons or number buttons. Press OK button then the date and time will be saved. When you need to change clock setting, you can set up it manually. (see page 25) ¦ Now, DVD Recorder is ready for use. Function for “Plug & Auto Setup” is fixed already. So if you want NOTE to change this fixed one, you can ...