Оценок - 2, средний балл: 3
(
)
)
|
Фрагмент инструкции
(. 10) 2..Select the drive (DVD, SD or USB) ............ (. 16, 25, 26) 3..Select channels and recording numbers etc./ Enter numbers ........................................................ (. 23) 4..Cancel 5..Basic operations for recording and play 6..Skip the specified time ............................................ (. 24) 7..Direct Navigator ................................................ (. 23, 32) 8..Selection/Enter, Frame-by-frame ...................... (. 10, 24) 9..Show sub menu ................................................ (. 23, 32) bk..Select audio ............................................................ (. 24) [A] for Recordings screen ....................................... (. 16) bl..Show on-screen menu ............................................ (. 38) [B] for Album View screen....................................... (. 26) bm..Start recording ........................................................ (. 14) bn..Change recording mode ......................................... (. 14) bo..Transmission window bp..TV and Set Top Box operations .............................. (. 50) bq..Channel select ........................................................ (. 14) br..Input select (IN1, IN2, DV) ................................ (. 14, 21) bs..Sub channel access for digital broadcasts bt..Delete...................................................................... (. 16) ck..Skip 1 minute forward ............................................. (. 24) cl..Show scheduled recording list ................................ (. 15) cm..Show FUNCTIONS window ................................... (. 29) cn..Return to previous screen co..Show setup menu ................................................... (. 42) cp..Create chapters ...................................................... (. 24) cq..Show status messages........................................... (. 28) cr..Start Flexible Recording ......................................... (. 19) RQT9048 Media Handling 7 RQT9048 Getting Rear Panel I OPTICAL L AUDIO OUT TSTREAM OUT 3987bk456211..AC IN~ = Power supply 2..Cooling fan 3..AUDIO/VIDEO input terminal ................... (. 8) 4..S VIDEO input terminal 5..Set Top Box Control terminal .................... (. 8) 6..Digital audio output terminal ................... (. 53) 7..HDMI AV OUT terminal ...................... (. 9, 54) 8..S VIDEO output terminal ........................ (. 53) 9..AUDIO/VIDEO output terminal ................. (. 8) bk..COMPONENT VIDEO OUT terminal ..... (. 53) The Unit’s Display 123451 Recording indicator 2Main display section 3 Disc indicator This indicator lights up when a disc that is supported by this unit is inserted. 4Scheduled recording indicator (. 15) On: When a scheduled recording program is registered and a recordable disc is inserted. Flashes: The scheduled recording indicator flashes when the unit cannot go to scheduled recording standby (e.g. there is no disc, etc). It does not flash if Quick Start is off. 5 Progressive indicator This indicator lights up when you select “24p” in “Progressive/24p” (. 39). Inserting Discs ;OPEN/CLOSE to open the tray. Insert a disc. Press [; OPEN/CLOSE] again to close the tray. Insert label-up. – – Notes When using 8 cm (3. ) DVD-RAM or 8 cm (3. ) DVD-R, remove the disc from the cartridge. It is not possible to record or play continuously from one side of a double sided disc to the other.You will need to eject the disc and turn it over. The unit may take some time to respond to [; OPEN/CLOSE] when the DVD Drive is selected with no disc in the drive. Inserting an SD Card Opening the front panel (. 6) Inserting the card Press on the center of the card until it clicks into place. Insert the card label up with the cut-off corner on the right. Removing the card Press on the center of the card and pull it straight out. ADAPTER If you are using a miniSD card/ microSD card, insert it into the card adaptor that comes with the card. Insert and remove this adaptor from the unit. Notes When “SD” is flashing or when copying a picture or displaying the Album in the SD card, do not turn off the unit or remove the SD card. Such action may result in malfunction or loss of the card’s contents. Inserting USB memory You can insert the USB memory directly into the USB port. Preparation Before inserting any USB memory to this unit, ensure that the data stored therein has been backed up. Opening the front panel (. 6) Inserting the USB memory Check the orientation of the USB connector and insert it straight in. Removing the USB memory Complete all USB memory- related operations and pull the USB memory straight out. When “uSb” is flashing on the unit’s display, do not turn off the unit or remove the USB memory. Notes There are few USB memory devices that cannot be connected. Some USB devices inserted into this unit may cause this unit to stop operating. Such USB devices cannot be used on this unit. Confirm that “uSb” (USB) appears on the unit’s display when a co...