Оценок - , средний балл:
(
)
)
Производитель: Panasonic
Размер: 2.54 mb
Название файла: 62cc4fe5-856f-4a46-845d-9d1b3b709cce.pdf
Язык инструкции:
Документ загружается, подождите пожалуйста
 |
Документ загружается, подождите пожалуйста
Фрагмент инструкции
SET (“ ” stands for a number.) • The remote control and main unit are using different codes. Change the code on the remote control. Press and hold [ENTER] and the indicated number button at the same time for more than 2 seconds. 15 HARD ERR (“HARD” and “ERR” are alternately displayed.) • If there is no change after turning the unit on and off, consult the dealer where the unit was purchased. — NoREAD • The disc is dirty or badly scratched. The unit cannot record, play, or edit. • The message may appear when the DVD lens cleaner has finished cleaning. Press [; OPEN/CLOSE] on the main unit to eject the disc. 6 — NoWRIT • Recording may be unavailable due to a disc problem. Use a new disc. — NoERAS • Deleting an item may be unavailable due to a disc problem. Use a new disc. — PLEASE WAIT (“PLEASE” and “WAIT” are alternately displayed.) • Displayed when the unit is started. This is not a malfunction. • The unit is carrying out its recovery process. You cannot operate the unit while “PLEASE WAIT” is displayed. — — UNSUPPORT (“UNSUP” and “PORT” are alternately displayed.) • You have inserted a disc the unit cannot play or record on. 4, 5 UNFORMAT (“UNFOR” and “MAT” are alternately displayed.) • You have inserted a new DVD-RW/+R/+R DL/+RW or a DVD-RAM/DVD-RW (DVD-Video format) recorded on other equipment. 34 U59 • The unit is hot. The unit switches to standby for safety reasons. Wait about 30 minutes until the message disappears. Select a position with good ventilation when installing the unit. Do not block the vent on the rear of the unit. — U61 • There was a power failure or the AC plug was disconnected while the unit was on. The unit is carrying out its recovery process. This process restores the unit to normal operation. The unit is not broken. Wait until the message disappears. — U88 • There was something unusual detected with the disc while recording or playing. The unit is carrying out its recovery process. This process restores the unit to normal operation. The unit is not broken. Wait until the message disappears. 41 U99 • The unit fails to operate properly. Press [POWER 8] on the main unit to switch the unit to standby. Now press [POWER 8] on the main unit again to turn the unit on. — RQT8314 39 Frequently asked questions Set up Page Do the Audio/Video cables need to be connected to the TV in order to see the Menus? What equipment is necessary to play multi channel surround sound? Are the headphones and speakers directly connected to the unit? The television has both S VIDEO IN terminal and COMPONENT VIDEO IN terminals. Which terminal should I connect with? Is my television progressive output compatible? • If your television does not have AUDIO/VIDEO terminals, an RF modulator is necessary. Consult your local dealer for more information. • DVD-Video: You can play DVD-Video multi channel surround by digitally connecting an amplifier equipped with a Dolby Digital or DTS decoder. • DVD-Audio: This unit plays DVD-Audio in 2 channels. You cannot play multi channel surround sound. • You cannot directly connect to the unit. Connect through the amplifier, etc. • We recommend the COMPONENT VIDEO IN terminal. Component signal outputs the color difference signals (PB/PR) and luminance signal (Y) separately in order to achieve high fidelity in reproducing colors. If the television is compatible with progressive output, a high quality picture can be output because this unit’s component video output terminal outputs a progressive output signal. • All Panasonic televisions that have 480p input terminals are compatible. Consult the manufacturer if you have another brand of television. 8–10 11 — 11 10 — Disc Can I play DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R, +R DL and +RW recorded with this unit with other equipment? Can I play DVD-Video, DVD-Audio and Video CDs bought in another country? Can a DVD-Video that does not have a region number be played? Please tell me about DVD-R, DVD-R DL, DVD-RW, +R, +R DL and +RW compatibility with this unit. Please tell me about CD-R and CD-RW compatibility with this unit. • You can play on compatible equipment such as DVD players after finalizing the disc on this unit. It is not necessary to finalize +RW. However, depending on the condition of the recording, the quality of the disc and capabilities of the DVD player, play may not be possible. To enable play on other DVD players, please use “Create DVD Top Menu” in the DVD Management menu. • You can play them if the video standard is NTSC. • However, you cannot play DVD-Video if their region number does not include “1” or “ALL”. • The DVD-Video region number indicates the disc conforms to a standard. You cannot play discs that do not have a region number. • This unit records and plays DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R, +R DL and +RW, and plays DVD-RW (VR format). • This unit also records and plays high speed recording compatible discs. • After recording but before finalizing +R, +R DL discs – You may not be able to pl...