Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
Follow the on-screen displays to describe which speakers are in your system and their sizes and positions. Set the size of your speakers in the Size screen. The front left/ right (L/R) speakers have a fixed setting of [Large]. The center (C), left surround (LS) and right surround (RS) speakers can each be set to [Large], [Small] or [Off]. Set a speaker to [Large] if the main speaker cone is 12 cm or more; set to [Small] if the it’s less than 12 cm. Note that the LS and RS speakers cannot be set independently. The subwoofer (SW) can only be set to [On] or [Off]. The graphic on the right of the screen represents your speaker setup, with the currently selected speaker’s name highlighted in blue, and the speakers set to [On] highlighted in yellow. Set the distance from your main listening position to each speaker in the [Distance] screen. The distance setting for any speaker that was set to [Off] in the [Size] screen will be grayed out. For the other speakers, enter the distance to the nearest 0.1m (10cm). You can set the distance for the L/R speakers between 0.3m and 9m. Note that you must set the C and SW speakers within 2m of the L/R setting. The LS and RS speakers must be set within –6m and +2m of the L/R setting. The graphic on the right of the screen represents your speaker setup, with the currently selected speaker’s name highlighted in blue, and the speakers set to [On] highlighted in yellow. — — — — Audio2 Video1 Language GeneralA1 V2 ExitMove Audio Out Speaker Setting Gain Setting CD Digital Direct 2 Channel Start Fix Off SETUPSelectENTER ExitSelectDistance Return Audio2 Video1 Language GeneralA1 V2 Speaker Setting L/R C LS RS SW Size — Large — Large — Large — Large — On L RC SW LS RS SETUPENTER Settings: 2 Channel (Factory setting) 5.1 Channel Notes • Even if you set [Audio Out] to [5.1 Channel], you’ll only get sound from all speakers when playing a multi-channel DVD-Audio disc, SACD or Dolby Digital, DTS or MPEG encoded DVD disc. • If you set to 2 Channel, Dolby Digital, DTS and MPEG audio is mixed down to two channels so you still hear all the audio recorded on the disc. • Some DVD-Audio discs don’t allow down-mixing of audio. These discs always output multi-channel audio regardless of the setting made here. Factory Settings: Center: Large Subwoofer: On Surround: Distance: Large All 10FT (USA models only) All 3.0m (Other than USA models) Notes • When the subwoofer (SW) is set to on, the LFE (low frequency effect) signals are input from the subwoofer. • When listening to a DVD audio source, the C, LS, and RS speakers will automatically be set to the [Large] size setting. However, the sound will not be affected by the change. Listening to another source will return the speakers to their original settings. • For DVD-Audio only, if the C, LS, or RS speakers is set to [Off], the audio is automatically downmixed to stereo unless the DVD audio software does not permit down mixing. • The distance setting is unavailable for SACD discs. ¦ Gain Settings Expert You may want to make this setting if you connected this player to your amplifier using the 5.1 channel analog outputs. Under the default setting, all channels are output at the relative volumes they were recorded at. Change the setting to [Variable] if you want to adjust the relative volume levels of any of the speakers. Adjustment is in the range of –6dB to +6dB, in steps of 0.5dB. When set to [Variable], the overall output level may sound quieter than when set to [Fix]. This is not a malfunction. — — Audio2 Video1 Language GeneralA1 V2 ExitMove SETUPSelectENTER Audio Out Speaker Setting Gain Setting CD Digital Direct 2 Channel Fix Variable Settings: Fix (Factory setting) Variable Notes • Gain settings are not effective when playing a CD with CD Digital Direct set to [On]. • When set to [Variable], the overall output level is set to –6.0dB. Adjust the relative volume levels of [C (center)], [LS (left surround)], [RS (right surround)], and [SW (subwoofer)] in the range of –6.0dB to +6.0dB from the value. The maximum output level (+6.0dB) which is set to [Variable] is same as the output level when set to [Fix]. Therefore, when set to [Variable], the output level sounds quieter than the output level when set to [Fix], in almost all cases. When Variable is selected, the following screen appears: ExitSelectTest Tone Return Audio2 Video1 Language GeneralA1 V2 L C R RS LS SW Gain Setting — 0.0 dB — 0.0 dB — 0.0 dB — 0.0 dB — 0.0 dB — 0.0 dB L R SW LS RS SETUPENTER RETURN Press the cursor button (3) to display the Test Tone screen. ExitSelectGain Return Audio2 Video1 Language GeneralA1 V2 L C R RS LS SW Test Tone — Off — Off — Off — Off — Off — Off L R SW LS RS SETUPENTER RETURN To help you gauge the correct gain levels, set the [Test Tone] to [On] (test tone from just that speaker) or [Auto] (test tone from each speaker in turn, excluding the subwoofer) then adjust the gain so that all speakers appear to be the same volume from your listening position. Follo...
Эта инструкция также подходит к моделям:DVD-проигрыватели - DPS-8.3 (1.81 mb)
DVD-проигрыватели - DPS-8.3 (1.81 mb)