Оценок - 4, средний балл: 3.8
(
)
)
|
Фото и характеристики Philips DVDR3320V |
Фрагмент инструкции
Digital Multi-channel sound A digital multi-channel connection provides the best sound quality. For this you need a multi-channel Audio/Video receiver that supports one or more of the audio formats supported by your Recorder (MPEG 2 and Dolby Digital). Check the receiver manual and the logos on the front of the receiver. otes – If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all. – Six Channel Digital Surround Sound via digital connection can only be obtained if your receiver is equipped with a Digital Multi-channel decoder. – To see the audio format of the current DVD in the on- screen display, press AUDIO. Amplifier (Receiver) AX AUDIO INPUTDIGITAL INPUT COAXIAL DIGITAL INPUT OPTICAL 18 Connections (Continued) Accessory Audio/Video (A/V) Connections to Recorder Connect the input jacks (AV3) on the Recorder to the audio/video out jacks on your accessory component, using audio/video cables. ote If you use the S-VIDEO IN jack on the front panel, the VIDEO IN jack on the front panel is not available. Connecting a Digital Camcorder Use a DV cable (not supplied) to connect the DV in/out jack of your DV camcorder/video deck to the front panel DV IN jack of this recorder. ote This jack is for connection to DV equipment only. It is not compatible with digital satellite tuners or D-VHS video decks. English Front of VIDEO OUTPUT AUDIO OUTPUT OR S-VIDEO OUTPUT DV Digital Camcorder DV IN/OUT Recorder Front of Recorder 19 Before Operation English Initial Settings In this menu system, there are several ways to customize the settings provided. Most menus consist of three levels to set up the options, but some require greater depth for the variety of settings. If you press SYSTEM MENU, only the first and second level of the menu system will appear on the TV screen. The third level can be displayed by pressing B. For navigating the menu levels, you will see “B” on the right side of the menu label to help you go to the next level. To bring up and exit the Menu: Press SYSTEM MENU to bring up the menu. A second press of SYSTEM MENU will take you back to initial screen. To go to the next level: Press B on the remote control. To go back to the previous level: Press b on the remote control. General Operation 1 11 Press SYSTEM MENU. The Setup menu appears. 2 22 Use v / V to select the desired option. 3 33 While the desired item is selected, press B to move to the second level. 4 44 Use v / V to select the second desired option. 5 55 Press B to move to the third level. 6 66 Use v / V to select the desired setting then press OK to confirm your selection. Some items require additional steps. 7 77 Press SYSTEM MENU to exit the Setup menu. GENERAL Auto Programming This Recorder is equipped with a frequency synthesized tuner capable of receiving up to 99 TV channels. Preparation: • Connect the Recorder to the desired type of aerial, as shown in Connecting to the Aerial on page 16. Program Edit Clock Set TV Aspect VCR Play Aspect VCR Play System AV2 Connection Progressive Scan Factory Set Auto Programming 11% Stop France 1 11 Press SYSTEM MENU. The Setup menu appears. 2 22 Use v / V to select the GENERAL option. 5 55 4 44 3 33 While the GENERAL option is selected, press B to move to the second level. Use v / V to select the Auto Programming option. Press B to move to the third level. Country option is highlighted. 6 66 Use v / V to select a country then press B. “Start” icon is highlighted. 7 77 Press OK to begin the channel search. The tuner will automatically cycle through all available channels in the area and place them in the tuner’s memory. 20 Before Operation (Continued) Program Edit You can edit a channel manually (add, delete, name, move, etc.). Auto Programming Clock Set TV Aspect VCR Play Aspect VCR Play System AV2 Connection Progressive Scan Factory Set Program Edit Edit 1 11 Press SYSTEM MENU. The Setup menu appears. 2 22 Use v / V to select the GENERAL option. 4 44 3 33 While the GENERAL option is selected, press B to move to the second level. Use v / V to select the Program Edit option then press B to move to the third level. “Edit” icon is highlighted. 5 55 Press OK. Program List menu appears. Select Move ClosePage Up/Down PR Ch. MFT Station PR-01 01 C 12 C 23 C 7 C 27 C 17 C 33 C 34 C 47 C 10 +10 0 0 -10 0 0 +20 0 -60 AAA BBB CCC DDD 02 03 04 05 06 07 08 09 10 11 OK 6 66 Use v / V to select a PR number then press OK. Program List options appears on the left side of the menu display. 7 77 Use v / V to select an option then press OK to confirm. Program Edit Station Rename Move Delete Decoder On/Off NICAM Auto/Off Program Edit: Edits the select ed program. Station Rename: Edits the station name. Move: Moves the program’s location on the program list. Delete: Deletes the program from program list. Decoder On/Off: Set the decoder for the program to On or Off. NICAM Auto/Off: Set the NICAM function to for the program...