Оценок - 3, средний балл: 5
(
)
)
|
Фрагмент инструкции
8 88 Shift the cursor using B buttons and select the second character using v / V buttons. 9 99 Press OK to confirm your Area Code selection, then press SYSTEM MENU to exit the menu. RECORD Disc Record Mode You can set the picture quality for DVD recording; XP (High Quality), SP (Standard Quality), LP (Low Quality), EP (Extend Quality). XP SP LP EP Disc Record Mode VCR Record Mode VCR Record System DV Record Audio Auto Chapter 1 11 Press SYSTEM MENU. The Setup menu appears. 2 22 Use v / V to select the RECORD option. 5 55 4 44 3 33 While the RECORD option is selected, press B to move to the second level. Use v / V to select the Disc Record Mode option. Press B to move to the third level. 7 77 6 66 Use v / V to select a desired Record Mode (XP, SP, LP or EP) Press OK to confirm your selection, then press SYSTEM MENU to exit the menu. VCR Record Mode You can set the picture quality for VCR recording; SP (Standard Play), LP (Long Play). Disc Record Mode VCR Record System DV Record Audio Auto Chapter SP LP VCR Record Mode English 27 Before Operation (Continued) English VCR Record System Your video recorder uses triple colour standards, PAL, SECAM and MESECAM. During recording your video recorder should select the colour system automatically, however if you experience problems you may need to do it manually. Disc Record Mode VCR Record Mode Auto PAL SECAM MESECAM DV Record Audio Auto Chapter VCR Record System DV Record Audio You need to set this if you have a camcorder using 32kHz/12-bit sound connected to the front panel DV IN jack. Some digital camcorders have two stereo tracks for audio. One is recorded at the time of shooting; the other is for overdubbing after shooting. On the Audio 1 setting, the sound that was recorded while shooting is used. On the Audio 2 setting, the overdubbed sound is used. Disc Record Mode VCR Record Mode VCR Record System Auto Chapter DV Record Audio Audio 1 Audio 2 Auto Chapter When recording, chapter markers are put in specified setting. You can change this interval to 5 minutes, or 10 minutes. If you select None, switch off automatic chapter marking altogether with the No Separation set ting. Disc Record Mode VCR Record Mode VCR Record System DV Record Audio Auto Chapter None 5 Min 10 Min DISC Initialize If you load a completely blank disc, the recorder will ini tialize the disc. DVD+R: The Initialize menu will appears. Select “OK” then press OK. DVD+RW: The recorder initialize the disc to DVD+RW mode. Also, you can format the disc from the Setup menu as below. StartInitialize Finalize Disc Label Disc Protect PBC AutoPlay About DivX(R) 1 11 Press SYSTEM MENU. The Setup menu appears. 2 22 Use v / V to select the DISC option. 4 44 3 33 While the DISC option is selected, press B to move to the second level. Use v / V to select the Initialize option. 5 55 Press B to move to the third level. Start icon is highlighted. 6 66 Press OK. Initialize menu appears. 7 77 Use b / B to select “OK” then press OK. It takes a few moments to format the disc. OK All data on the disc will be deleted. Proceed? Initialize Cancel Caution If you want to change the disc format, everything recorded on the disc will be erased. 28 Before Operation (Continued) Disc Finalize Finalizing ‘fixes’ the recordings in place so that the disc can be played on a regular DVD player or computer equipped with a suitable DVD-ROM drive. Finalizing a Video mode disc creates a menu screen for navigating the disc. This is accessed by pressing LIST/DISC MENU or TITLE. Caution • When DVD+R and DVD+RW recording, you’ve finalized a disc recording, you can’t edit or record anything else on that disc except DVD+RW. Initialize Disc Label Disc Protect PBC AutoPlay About DivX(R) Finalize Unfinalize Finalize 1 11 Follow steps 1-3 as shown on page 28 (Initialize). 2 22 Use v/ Vto select the Finalize option. 3 33 Press Bto move to the third level. Finalize is highlighted. 4 44 Press OK. Finalize menu appears. OK Do you want finalization? Finalize Cancel 5 55 Select OK then press OK. The recorder starts finalizing the disc. ote How long finalization takes depends on the type of disc, how much is recorded on the disc, and the number of titles on the disc. A disc recorded can take up to 8 minutes or more to finalize. Disc Label Use this to enter a name for the disc. This name appears when you display disc information on-screen. • The disc name can be up to 32 characters long. • For discs formatted on a different Recorder, you will see only a limited character set. Initialize Finalize Disc Protect PBC AutoPlay About DivX(R) EditDisc Label 3 33 2 22 1 11 Follow steps 1-3 as shown Initialize on page 28. Use v/ Vto select the Disc Label option. Press Bto move to the third level. Edit icon is highlighted. 4 44 Press OK. Keyboard menu appears. 01 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z OK CancelSpace Delete Language English/Latin Capital 5 55 Enter a name for the disc. Use vVbBto select a character then press OK to confi...
Эта инструкция также подходит к моделям:Акустика - DVDR3320V/02 (2.29 mb)