Оценок - 5, средний балл: 4.4
(
)
)
|
Фрагмент инструкции
This should give you the best quality picture from the three types of video output available. • Use a component video cable (not supplied) to connect the COMPONENT VIDEO OUTPUT jacks to a component video input on your TV, monitor or AV receiver. • If your TV or projector has BNC component video inputs, use a BNC component video cable to connect them to the DPS-5.4’s BNC component video outputs. • The DPS-5.4 has two component video outputs. The COMPONENT 1 output uses RCA/phono connectors. The COMPONENT 2 output uses BNC connectors. They output the same video signal. Y PB PR COMPONENT VIDEO IN TV Note: •To set up the player for use with a progressive scan TV, see “Component Out” on page 44. Connecting to an AV Receiver Although you can reproduce the DVD Player’s sound from the TV speakers with the connections on page 18, connecting with an amplifier provides you high quality dynamic sounds. To reproduce Dolby Digital surround and DTS surround sound, you need to connect to an amplifier with a Dolby Digital and DTS decoder respectively. Before connecting • When you connect the DVD Player to the amplifier, be sure to turn off the power and unplug both units from the wall outlet before making any connections. Otherwise, the speakers may be damaged. • Connect the plugs securely. To enjoy surround sound you need to connect this player to an AV receiver using a digital output. This player has both coaxial and optical digital jacks; use whichever is convenient. In addition to a digital connection, we recommend also connecting using the stereo analog connection. To record the audio from a CD-R disc etc. to a cassette or CDR recorder that’s connected to the AV receiver, and when your AV receiver has Zone2, you must connect the DPS-5.4’s analog audio outputs to the AV receiver. You’ll probably also want to connect a video output to your AV receiver. You can use any of the video outputs available on this player (the illustration on next page shows a standard (composite) connection). 20 Connecting the DPS-5.4—Continued 1. Connect one of DIGITAL AUDIO OUTPUT jacks on this player to a digital input on your AV receiver. This enables you to listen to surround sound. For an optical connection, use an optical cable (not supplied) to connect the “OPTICAL DIGITAL AUDIO OUTPUT” jack to an optical input on your AV receiver. For a coaxial connection, use a coaxial cable (similar to the supplied video cable) to connect the “COAXIAL DIGITAL AUDIO OUTPUT” jack to a coaxial input on your AV receiver. 2. Connect the analog AUDIO OUTPUT L/R and VIDEO OUTPUT jacks on this player to a set of analog audio and video inputs on your AV receiver. The diagram shows standard video connections, but you can alternatively use the S-Video or component video connections if they’re available. 3. Connect the AV receiver’s video output to a video input on your TV. Tip: • The DPS-5.4 has two composite video output connectors and two pairs of stereo analog audio output connectors. They output the same video and audio signals respectively. • You usually have to connect the same kind of video cable between your DVD player and AV receiver, and between your AV receiver and TV. • The remote controller supplied with Integra/Onkyo AV receiver or amplifiers can be used to control the DPS-5.4. • The function of the upper and lower connectors are the same. Connect to either one. • For remote control operation, you must make an analog RCA/phono connection between your DPS-5.4 and the AV receiver or amplifier, even if they are connected digitally. OPTICAL COAXIAL AV receiver IN FRONT DVD L R AV receiver Connecting -compatible Components REMOTE CONTROL L R IN DVD AV receiver Connecting the DPS-5.4—Continued Controlling AV Components that are Out of Range You can use the following multi-room kits to control the DPS-5.4 when it’s out of range of the remote controller: • Integra Multi-Room System (IR Remote Controller Extension System) • Multiroom AV distribution and control systems such as those made by Niles® and Xantech®. Controlling Other Out-of-range AV Components If another AV component is out of range of its remote controller, you can use a commercially available IR emitter to retransmit the remote controller signals received at the DPS-5.4’s IR IN, as shown below. Controlling the DPS-5.4 When It’s Out of Range If the DPS-5.4 is located in another room, installed in a cabinet, or out of range of its remote controller, you can use a commercially available IR receiver to pickup the remote controller signals and feed them to the DPS-5.4, as shown below. Connect the IR emitter to the DPS-5.4’s IR OUT, and place the IR emitter in front of the other AV component’s remote control sensor (usually located on its front panel), as shown below. See the instructions supplied with the IR emitter. IR IN IR OUT Connecting block IR receiver DPS-5.4 IR emitter Remote controller Other component : Signal flow Connect the IR receiver to the DPS-5.4 as shown below. IR IN DPS-5.4 Inside...
Эта инструкция также подходит к моделям:DVD-проигрыватели - DPS-5.4 (1.59 mb)
DVD-проигрыватели - DPS-5.4 (1.59 mb)