Оценок - 4, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
Rename Channels Allows you to name your stored channels. 1 Use ..to select the channel you wish to name and press .. 2 Press ..to select“Rename” and press ENTER. • The character palette appears. 3 Use ....to select the desired characters, pressing ENTER after each entry. 4 When finished, select“Finish”and press ENTER. CHANNELEDITORCHANNELEDITOR Move Up Move Up GCN NAME Move Down Insert To... Swap With... Rename EXIT 009 000 ---- 010 000 ---- 011 000 ---- 012 000 ---- 013 000 ---- 014 000 ---- 015 000 ---- Insert Channels Allows you to reinsert a channel any where in the channel list. 1 Use ..to select the channel you wish to insert and press .. 2 Press ..to select“Insert To...”and press ENTER. 3 Use ....to enter the new Channel Number and press ENTER. • The channel moves to the new position. Swap Channels Allows you to swap the TV channel order stored in the DVD Recorder to match the channel order stored in your TV set. 1 Use ..to select the channel to be swapped and press .. 2 Press ..to select“Swap With”and press ENTER. 3 Use ....to enter the new Channel Number and press ENTER. • The channels will swap positions. • Repeat as necessary. • When finished, select Exit and press ENTER. DVD Recorder User’s Guide Formatting/Finalizing Discs What is Formatting? • Formatting completely erases a DVD+RW so it can be recorded on again. • You cannot erase and reformat a DVD+R disc. • Make sure you have safely backed up your DVD+RW disc before reformatting because all contents will be erased. Erasing a DVD+RW To erase a DVD+RW disc: 1 Press GUIDER to display the Easy Guider menu. 2 Press .. to select “Erase”and then press ENTER. PlaybackEraseRecordFinalize 3 Press ENTER again to confirm that you wish to erase and reformat the disc. 4 When the disc formatting process is complete, press ENTER to exit the Easy Guider. What is Finalizing? • Finalizing a DVD+R locks its recordings in place so the disc can be played on most standard DVD players or computers equipped with DVDROM drives. • After you have finalized a DVD+R disc, you cannot edit or record anything else on that disc. • Finalizing is not necessary when using a DVD+RW disc. Finalizing a DVD+R To finalize a DVD+R disc: 1 Press GUIDER to display the Easy Guider menu. 2 Press .. to select “Finalize”then press ENTER. PlaybackEraseRecordFinalize 3 Press ENTER again to confirm that you wish to finalize the disc. • Finalizing can take up to 3-4 minutes depending on the type of disc, how much is recorded on the disc, and the number of titles on the disc. 4 When the disc finalization is complete, press ENTER to exit the Easy Guider. 4 - Operations 37 5Help This Chapter shows you how to get help, including troubleshooting, customer support, and warranty information. DVD Recorder User’s Guide Customer Support The Troubleshooting section below will help you solve common issues with your DVD Recorder. If you don’t find the answers you need here, you can contact our Customer Service Department as follows: Phone (800) 736-7679 E-Mail customersupport@govideo.com Web Troubleshooting SYMPTOM CAUSE SOLUTION No power. The power cord is disconnected. Plug the power cord into the rear panel and wall outlet securely. No picture. The TV is not set to receive DVD Recorder signal output. Select the appropriate video input on the TV so the picture from the DVD Recorder appears on the TV screen. The video cable is not connected securely. Connect the video cable securely. The TV power is turned off. Turn on the TV. No sound. The equipment connected with the audio cable is not set to receive DVD Recorder signal output. Select the correct input mode on the audio receiver so you can listen to the sound from the DVD Recorder. The audio cables are not connected securely. Connect the audio cable securely. The power of the equipment connected with the audio cable is turned off. Turn on the equipment connected with the audio cable. The audio cables are damaged. Replace with new ones. DVD Recorder does not start playback. No disc is inserted. Insert a disc. Check that the disc indicator on the front panel display is lit. An unplayable disc is inserted. Insert a playable disc. Check the disc type, color system, and regional code. The disc is placed upside down or is not placed within the guide. Place the disc with the playback side down inside the guide. The disc is dirty. Clean the disc. The Parental Control is set. Cancel the Parental Control function or change the rating level. Picture from external input is distorted The video signal from the external component is copy-protected. Connect the component directly to your TV. Some channels are skipped over when using CH .• The skipped channels were deleted with the Add/Delete feature. See “Add/Delete Channels”on page 27 or page 36. 5 - Help 39 Troubleshooting SYMPTOM CAUSE SOLUTION Picture or sound of broadcasting channel is weak or missing. Antenna or cables are loose. Tighten connections or replace cable. Wrong TV Signal is selected in...