Оценок - , средний балл:
(
)
)
Производитель: Goldmund
Размер: 410.75 kb
Название файла: c9032734-28af-414f-b117-9a5e7602af4e.pdf
Язык инструкции:
Документ загружается, подождите пожалуйста
 |
Документ загружается, подождите пожалуйста
Фрагмент инструкции
This high-precision Universal player will provide the best tracking conditions for today’s high-quality DVDs and CDs. COMPATIBILITY Please note that the Goldmund Eidos 19 is compatible with the following formats: ¦ DVD Video 12 and 8 cm size, one or two layers, single-sided or double-sided. ¦ VIDEO CD 12 and 8 cm size, single-sided. ¦ Audio CD 12 and 8 cm size, single-sided. ¦ CD-R/RW ¦ DVD-R/RW ¦ DVD – Audio ¦ SACD ¦ MP3 CD ASSOCIATED EQUIPMENT If you are a technician, musician, or a user who demands the very best in sound transcription, we strongly recommend the use of one of our separate D/A converters - the Goldmund Mimesis 20M, Mimesis 21+ or SRDA2. The built-in D/A converters are not up to the same quality standard and are provided for use in simpler systems or with formats requiring them (multichannel DVD-Audio, SACD). P 5 | User manual - GOLDMUND EIDOS 19 Universal Player 2 2.1 2.2 SETTING UP THE EIDOS 19 UNPACKING You will find in the packing: ¦ The player itself ¦ The power cord ¦ This user manual ¦ The warranty card, to be sent back to Goldmund immediately to benefit from the Goldmund 3 year warranty and upgrade programs. Unpack the above-mentioned parts with care. Keep all packing for future use. WARNING IF YOU NEED TO RETURN THE DVD TO THE FACTORY OR TO YOUR LOCAL REPRESENTATIVE FOR A WARRANTY REPAIR, PLEASE NOTE THAT IT MUST BE SHIPPED IN THE ORIGINAL PACKAGING. THIS PACKAGING HAS BEEN DESIGNED SPECIFICALLY TO PROTECT YOUR GOLDMUND EIDOS 19 UNIVERSAL PLAYER. USE OF ALTERNATIVE PACKAGING MAY RESULT IN DAMAGE, INVALIDATING WARRANTY COVER. POWER SUPPLY VOLTAGE SELECTION The power supply of your unit has been adjusted to operate with the AC voltage of your area. Check on the back panel of the unit if in any doubt. If you move after purchasing the player to an area using different mains voltage, do not forget to switch the back panel selector to the new voltage of your area. The unit tolerates 50 or 60 Hz mains. User manual - GOLDMUND EIDOS 19 Universal Player | P 6 2 2.3 2.4 SETTING UP THE EIDOS 19 CHOICE OF THE PLAYER LOCATION To get the best result, especially in audio, you will have to select a very rigid support for your DVD transport. Due to the specific quality of its Goldmund «Mechanical Grounding» construction, the Goldmund DVD Player is less critical than other designs in placement selection. Feedback is mostly so low that no special precaution is required. Nevertheless, position the player as far as you can from speakers if you want to totally avoid air coupling between the speakers and the player. Locate the support so the transport has the most rigid possible connection to the floor. Solid coupling is essential, and if your support is standing on a suspended floor, the support must have at least one foot over a supporting beam or be located close to a supporting wall. POWER CONNECTION Plug the AC power cord to the back of the Eidos 19 and into a wall socket. Switch the back power switch ON. The front display will glow on as soon as you press any key or when pressing the remote control STANDBY/ON button, meaning the unit is now powered on. P 7 | User manual - GOLDMUND EIDOS 19 Universal Player 2 2.5 SETTING UP THE EIDOS 19 BACK PANEL CABLE CONNECTIONS VIDEO CONNECTIONS The EIDOS 19 offers 3 different type of Video signal outputs: ¦ S-Video Output connector. ¦ 3 x 75 Ohms RCA coaxial Component Video Output connectors. ¦ DVI Digital Video Output Depending on your specific installation you may choose one of the above video outputs. Always use high quality cables to get the best picture. The best results will be achieved by using high quality DVI cable from the Digital Video Output. Always experiment to find the best selection, readjusting the color and hue accordingly. User manual - GOLDMUND EIDOS 19 Universal Player | P 8 2 2.5 SETTING UP THE EIDOS 19 BACK PANEL CABLE CONNECTIONS AUDIO CONNECTIONS The Goldmund Eidos 19 is equipped as standard with the following stereo output standard connectors: ¦ 75 Ohms RCA coaxial SPDIF connector. ¦ TOSLINK optical cable output. You may use these connectors to connect your player to a D/A converter or digital preamplifier. Goldmund recommends that the greatest care is taken when selecting the cable linking the player to the D/A converter or digital preamplifier. The very accurate signal provided by the Eidos 19 can easily be ruined by an imperfect connection. Use a «Goldmund LinealTM» cable from the coaxial output if you want to reach the most accurate jitter-free connection for CD playback. In addition, there are the following analog Audio Outputs: ¦ 2 x RCA (Left/Right) coaxial stereo analog outputs. ¦ 6 x RCA 6 channel coaxial analog outputs (needed for multichannel DVD-Audio and SACD connection). P 9 | User manual - Eidos 19 | DVD Player 3 3.1 These functions, accessible from the keyboard can also be achieved by the remote-control transmitter. Please, see next page for all Remote Control functions. OPERATING THE EIDOS 19 FRONT PANEL CONTROLS FRONT ...