Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
A stereo system or an amplifier Digital input jack See B. Analog audio input jacks (L/R) See C. An AV receiver equipped with Dolby Digital decoder or DTS decoder Digital input jack See D. An AV receiver equipped with Dolby Pro Logic Surround Analog audio input jacks (L/R) See E. Before making connections • Connect the AC cords of the unit and external equipment at the end, after finishing the other connections. •Insert the plugs completely into the jacks. Loose connections may produce a humming sound or other noise interference. • When using an optical connection, remove the dust cap from the DIGIT AL AUDIO OUT OPTICAL jack on the rear of this unit. Keep the cap in store. When not using optical connections, the dust cap should be in place. • Refer to the instructions for the connected equipment. CAUTION Do not select “ BITSTREAM” in the “AUD OUT” when connecting to an AV receiver not equipped with a Dolby Digital decoder or DTS decoder (with an optical or coaxial connecting cord). Merely attempting to play a DVD may cause a high level of noise which could be harmful to your ears and damage the speakers. In such a case, be sure to select “DIGITAL PCM” in the “AUD OUT”. NOTES •When the picture noise appears while copy-protected DVDs are played, connect the unit directly to a TV set. Do not connect through a VCR, TV/VCR or AV selector . • For the speakers and their connection, refer to the instructions for the AV receiver . CAUTION For customers living in Burma, Cambodia, Philippines, Taiwan or Republic of Korea In the above countries, TV broadcasting system is NTSC. To use this unit with the NTSC TV set, TV SYS in the setup menu of this unit must be changed to NTSC, after connecting. For more details, refer to "Basic operations" on page 32 and "TV SYS" on page 34. Do not place heavy objects on this unit, otherwise disc tray of this unit may not be opened. 10 ENGLISH A Connecting to a TV set only A Connecting to a TV set only PREPARATIONS Audio cord (supplied) Rear of TV set to an AC outlet Rear of the unit When your TV set is equipped with an S-video input terminal, see page 16. to AUDIO OUT L (white)/ R (red) jacks Video cord (supplied) white redyellow VIDEO S-VIDEO UDIO OUT OPTICALCOAXIAL DIGITAL AUDIO OUT LR to an audio input jacks (Left/white, Right/red) to a video input jack (yellow) to VIDEO OUT 1 or 2 jack (yellow) En Set the setup menu correctly after connecting! According to the audio equipment and TV set to which this unit is connected, set the “TV TYPE” of the setup menu correctly referring to the following below . See “CHANGING SETUP VALUE” on page 32 in detail. TV TYPE When your TV set is a conventional-screen size TV: [4:3 LB ] When your TV set is a wide-screen size TV: [16:9 ] NOTE When the picture noise appears while copy-protected DVDs are played, connect the unit directly to a TV set. Do not connect through a VCR, TV/VCR or AV selector . CONTINUE ENGLISH 11 CONNECTIONS (CONTINUED) B Connecting to a TV set and an amplifier with a Digital In jack Use either the commercially available optical cord or 75 ohm coaxial cord when connecting this unit to an amplifier with a Digital In jack. The supplied video cord is also available instead of the coaxial cord. to a digital input jack TV set Front speaker (L) Front speaker (R) Rear of the unit Amplifier with a Digital In jack to an AC outlet Optical cord (not supplied) When your TV set is equipped with an S-video input terminal, see page 16. to a video input jack (yellow) to VIDEO OUT 1 or 2 jack (yellow) to DIGITAL AUDIO OUT OPTICAL jack to DIGITAL AUDIO OUT COAXIAL jack Coaxial cord (not supplied) yellow VIDEO AUDIO OUT OPTICALCOAXIAL DIGITAL AUDIO OUT LR S-VIDEO yellow Video cord (supplied) Set the setup menu correctly after connecting! TV TYPE According to the audio equipment and TV set to which this unit is connected, set the “AUD OUT” and “TV TYPE” of the setup menu correctly referring to the following below . When your TV set is a conventional-screen size TV: [4:3 LB ] See “CHANGING SETUP VALUE” on page 32 in detail. When your TV set is a wide-screen size TV: AUD OUT [16:9 ] [DIGITAL PCM] NOTE When the picture noise appears while copy-protected DVDs are played, connect the unit directly to a TV set. Do not connect through a VCR, TV/VCR or AV selector . 12 ENGLISH C Connecting to a TV set and an audio system C Connecting to a TV set and an audio system PREPARATIONS white Audio cord (supplied) TV set to an AC outlet Rear of the unit When your TV set is equipped with an S-video input terminal, see page 16. to an audio input jacks (Left/ white, Right/ red) to AUDIO OUT L (white)/ R (red) jacks Audio system red yellow to VIDEO OUT 1 or 2 jack (yellow) VIDEO AUDIO OUT OPTICALCOAXIAL DIGITAL AUDIO OUT LR S-VIDEO Video cord (supplied) to a video input jack (yellow) En Set the setup menu correctly after connecting! According to the audio equipment and TV set to which this unit is connected, set the “TV TYPE” of the setup menu correctly referring to the ...