Оценок - 2, средний балл: 4.5
(
)
)
|
Фото и характеристики Clarion MAX675VDII |
Фрагмент инструкции
Changing the color of the title and command bars in the screen 2-1. Touch the []] key of the MONITOR ADJ item to display the Monitor Adjust screen. * This screen can also be displayed directly by pressing and holding the [ADJ] button for more than 1 second. 2-2. Touch the [Auto], [Day] or [Night] key to set the color mode (The factory default setting is “Auto”). “Auto”: The color is changed according to the status of the car light: When the car light is off: light gray color When the car light is on: dark gray color “Day”: Set to the light gray color. “Night”: Set to the dark gray color. Note: • The setting for the MONITOR ADJ item made in the NAVI mode automatically returns to “Auto” (the factory default setting) if the power is turned off or the vehicle’s illumination switch is operated. Adjusting the brightness, color, hue and dimmer level Note: • The Color and Hue settings can be adjusted only in the DVD video, Video CD, TV/VTR and VISUAL modes, and only when the car is stopped and the parking brake is applied. • The Hue setting can be adjusted only when the NTSC mode is selected. 2-1. Touch the []] key of the MONITOR ADJ item to display the Monitor Adjust screen. * This screen can also be displayed directly by pressing and holding the [ADJ] button for more than 1 second. 2-2. Touch the [Bright] key repeatedly to select the adjustment type. Every pressing it changes adjustment type as follows: [Bright] . [Color] . [Hue] . [Dimmer] . [Bright] ... “Bright”: Adjusts the brightness of the display. “Color”: Adjusts the color saturation. “Hue”: Adjusts the tone of color (red is emphasized or green is emphasized). “Dimmer”: Adjusts the panel brightness when the car lights are ON/OFF. 2-3. Touch [[] or []] key to adjust a level. Bright/Color/Hue: The factory default setting is medium level. Dimmer: The factory default setting is, when the car light is off: brightest level when the car light is on: medium level “Bright” []]: Press to make image brighter. [[]: Press to make image dimmer. “Color” []]: Press to increase color depth. [[]: Press to decrease color depth. “Hue” []]: Press to increase green. [[]: Press to increase red. “Dimmer” []]: Press to make image brighter. [[]: Press to make image dimmer. 24 MAX675VDII Basic Operations Warning display when CCD camera is installed The following warning message is displayed during use of the CCD camera: “Make sure of safety around your vehicle”. 2-1. Touch the [ON] or [OFF] key of the CAMERA WARNING item to turn this function on or off (The factory default setting is “ON”). Switching the VTR system between NTSC and PAL Note: • This setting is applied only to the VISUAL/VTR input mode. 2-1. Touch the [NTSC] or [PAL] key of the NTSC/PAL item to set the VTR system (The factory default setting is “NTSC”). Changing the color of the background picture 2-1. Touch the []] key of the WALL COLOR item to display the WALL COLOR screen. 2-2. Touch the desired Color you wish to set (The factory default setting is “CYAN”). Turning on/off the motion of the background picture 2-1. Touch the [ON] or [OFF] key of the MOTION item to set the function (The factory default setting is “ON”). Front monitor lock When an external device is connected to the Visual terminal, lock the front monitor to show the visual input source. Note: • This function is enabled only when the CONNECT item of the GENERAL menu is set to other than “NONE”. 1. Press the [MAP] button to set the monitor lock. The front monitor screen is locked to show the visual input source. 2. To cancel the monitor lock, press the [MAP] button. The screen returns to show the image of the selected mode. Adjusting the GENERAL 1. Press the [ADJ] button, then touch the [GENERAL] key. 2. Touch the [C] key to display the next menu screen if desired. 3. Perform the adjustment for the desired item. See the following sections for detail. 4. Touch the [Back] key to return to the previous screen. * In the following sections, only the details regarding adjustments are described, procedures to select items are skipped. Setting the BEEP The sound heard when you make operations is called “beep”. The unit can be set up so that it does not produce this beep sound. • The factory default setting is “ON”. 3-1. Touch the [ON] or [OFF] key of the BEEP item to turn the function on or off. Setting the Blink LED When this function is set to “ON”, the Blink LED indicator will blink when the ACC power is turned off. 3-1. Touch the [ON] or [OFF] key of the BLINK LED item to turn the function on or off (The factory default setting is “OFF”). • Setting the CATS function (see page 27) turns on the Blink LED function as well. English Owner’s manual 25 MAX675VDII English Owner’s manual English Owner’s manual Basic Operations Performing the system check 3-1. Touch the []] key of the SYSTEM CHECK item. 3-2. Touch [Check] key at the top right of the screen to perform the system check manually. The system will be restarted after performing the system check. Changing t...