Оценок - 4, средний балл: 5
(
)
)
|
Фрагмент инструкции
Note: • You cannot register the same cellular phone which is already registered. If you wish to change the Cellular key registered, once delete the corresponding cellular phone from the current Cellular key, and then register it again to your desired Cellular key. • To delete the cellular phone registration 1.Touch the [ ] key to delete the device. A confirmation screen is displayed. 2.Touch the [ ] key to confirm delete. Select the cellular phone To change the current cellular phone to the other device which is already registered, perform the following operation. 1. Touch the [ ] key to display the Device Select screen. 2. Touch the currently connected device, then press [ ] key to disconnect the active device. 3. Touch the desired Device key you wish to use. Press [ ] key to select it as your active device. The corresponding cellular phone is set as the current telephone. • If the power of the cellular phone is not turned on, turn it on. • The cellular phone may prompt to acknowledge the Bluetooth connection or to enter the Pass Key code of this unit. Perform these operations according to the message displayed. 4. Touch the [ ] key to return to the previous screen. Obtaining the Phone Book data Sending the Phone Book data from the cellular phone enables you to make a call using the Phone Book function from this unit. 1. Perform the Object Push transfer operation of the Phone Book data on the current cellular phone. For details of the operation, see the operation manual of the cellular phone. Note: • Some cellular phones may not be able to transfer the Phone Book data. • Some cellular phones cannot transfer the Phone Book data when the hands-free mode is set or it is also registered in the Bluetooth mode. In those cases, disable these functions from the cellular phone before performing the Object Push transfer. • Some cellular phones may transfer Phone Book data automatically. Telephone operations Making a call using the Ten-Key pad 1. Touch the [ ] key to display the Ten-Key pad screen. 2. Enter the telephone number by using the Ten-Key pad displayed on the screen. 3. Touch the [ ] (Send) key to call the entered number. • The following Telephone Interrupt screen is displayed during phone call. • Touch the [ ] key to talk by using the cellular phone and canceling the hands-free function (Private Mode). To return to the hands-free mode, touch the [ ] key again. •Touch the [ ] key to mute the microphone.Now you can hear the other side, but the other side cannot hear your side. •Touch the [ ] key to hold the current phone call, now you can answer to the other incoming call. Touch again to talk with previous call 4. When the call is finished, touch [ ] key to hang up. Note: • Depending on some special cellular phone, the Telephone Interrupt screen may be closed and the connection with this system may be disconnected when entering the Private mode. Making a call using the Phone Book You can use the Phone Book data obtained from the cellular phone to make a call from this unit. Note: • Before using this function, the Phone Book data must be sent from the cellular phone. • Only the Phone Book items with at least one telephone number registered in the captured Phone Book data are displayed on the Phone Book screen. 1. Touch the [ ] key to display the Phone Book screen. 2. Touch the desired Name key you wish to dial. • Flick the list up and down to scroll the list. 3. Touch the [ ] key to call the specified number. The Telephone Interrupt screen is displayed, and calling starts. • When the call is finished, touch the [ ] key to hang up. Making a call using the History The system will memorize the Dialed/Received calls record data in the memory. You can confirm it and use it to make a call from this unit. 1. Touch the [ ] key. The History List screen is displayed. • The items are sorted by Dialed, Missed and Received calls. • Flick the list up and down to scroll the list. 2. Touch the desired History item key you wish to dial. 3. Touch the [ ] key to call the specified number. The Telephone Interrupt screen is displayed, and calling starts. • When the call is finished, touch the [ ] key to hang up. Answering to an incoming call When a call comes in, the following Telephone Interrupt screen appears. You can answer to the incoming call on this system by the following operation. 1. Touch the [ ] key to answer the call. 2. When the call is finished, touch the [ ] key to hang up. 15. RADIO OPERATIONS Listening to the Radio 1. Touch the [Tuner] button on the Main menu display. The tuner mode screen is displayed. 2. Press the [FM1/2/3/AM] button or touch the [Band] key on remote control to select the radio band. Each time the button is pressed, the radio reception band changes in the following order: FM1->FM2->FM3->AM ->FM1... 1. Preset Scan Button 2.Direct Button 3.Preset List Button 4.Frequencies Display 5.Tune Up 6.Tune Down 7.Band Display 8.LOC/DX Display 9.Bluetooth Display 10.System Time Seek Tuning 1. Press the [FM1...
Эта инструкция также подходит к моделям:DVD-проигрыватели - NZ501 (4.1 mb)