Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
a foul word is not captioned, misspelled or is not synchronized with the spoken word.) • The built-in Foul Language Filter may not work on some discs depending on recording conditions. • DVD video discs may or may not respond to the TVG Mode settings. Make sure this function works with your DVD video discs. • When playback starts, the TVG information may appear on the TV screen. TVGuardian- and TVG" are registered trademarks of Principle Solutions, Inc. IMPORTANT INFORMATION: • Use a TV with closed caption capability and set the function to “On”. • Set the same channel number on your TV as above. • The built-in TVGuardian5 Foul Language Filter (TVG;i!) works only English language DVD video disc supporting closed caption, not any other languages. • For improvement, on-screen displays subject to change without notice. \ -E26- INITIAL SETTINGS Once the initial settings have been completed, the player can always be operated under the same conditions. The settings will be retained in the memory until they are changed, even it the powei is turned off. Setting Language 1. Press [SETUP] in the stop mode. The setup screen appears. ‘Language” is highlighted. 2. Press [ENTER]. "Language'' screen appears. 3. Press [T] or [A] to select the item (highlighted). Example: _ ___ OSD ¡_ Enc|lish_ Audio Disc Subtitle Disc DVD Menu Disc 4 Press [ENTER] The submenu appears. Example: OSD Audio Subtitle DVD Menu English Disc Disc Disc L__English Español Français Deutsch Portugués Notes: • in this instruction manual, the language in on-screen display is English. If you change the language, please follow the selected language in on-screen display. • You cannot switch audio sound track languages if there is only one language recorded on the disc. ° When you play back a DVD video disc, the player i automatically displays the pre-selected subtitle language if it is included on the disc. * If ‘Others” is selected, enter the language code (See ‘‘LANGUAGE CODE LIST” on page E30.) * For improvement, on-screen display s subject to change without notice. 2, 4, 6 5. Press [Tj or [A] to select the language (highlighted). 6. Press [ENTER], The selected ianguage remains. 7. Repeat steps 3 and 6 for other items. Note: If “Others” is selected, enter the language code. (See ‘ LANGUAGE CODE LIST” on page E30.) 8. Press [A] to skip back to the setup screen (or press [SETUP]). Need help? Call 1-800-421-5013 -E27- Setting Display Setting Digital Out 1. Press [SETUP] in the stop mode. The setup screen appears. 2. Press [►] to select "Display''. 3. Press [ENTER], "Display” screen appears. 4. Press [ENTER], The submenu (‘'4:3 LB”. “4:3 PS" and “16:9“) appears 5. Press [▼] or [A] to select the appropriate setting for your TV screen size. Example: To select “4:3 PS" TV Type r 4:3 LB 4:3 LB 4:3 PS 16:9 6. Press [ENTER], Example: TV Type 4:3 PS 7. Press [A] to skip back to the setup screen (or press [SETUP]). . in ; 1 ! 1 . 1 , 1 4..J. -I, ■ Г f-I ' 1 ] :L i'l '■ . Cut off Cut off 4:3 LB (Letterbox): Select when a conventional TV set is connected. When the wide screen disc Is played back, the black bands appear at the top and bottom of screen. 4:3 PS (Panscan): Select when a conventional TV set Is connected. When the wide screen disc is played back, It displays pictures cropped to fill to your TV screen. The left and right edges are cut off. 16:9 : Select when a wide screen TV set is connected. Played In “FULL” size. (Setting the wide screen TV to “FULL” mode is also necessary.) Notes: • The screen size may differ depending on the DVD video discs. • If you select 16:9 to get rid of the black bands on screen when wide screen disc is played back, picture may be slightly distorted. • In some discs, even if 4:3 PS is selected, the black bands may remain on the screen. If the optical DIGITAL OUT jack is connected to the amplifier. you must set as follows: 1. Press [SETUP] in the stop mode. The setup screen appears. 2. Press [►] to select "Digital Out". 3. Press [ENTER], "Digital Out" screen appears. 4. Press [▼] or [A] to select the item ^highlighted), then press [ENTER], The submenu appears. Example: 96kHz LPCM Dolby Digital DTS MPEG 48kHz LPCM LPCM Off LPCM LPCM Bitstream 5. Press [T] or [A] to select the submenu (highlighted). ExamDle: To select "Dolby Digital Bitstream" 96kHz LPCM Dolby Digital DTS MPEG 48kHz LPCM ¡ PCL! О:1 ~ LPCM LPCM Bitstream 6. Press [ENTER], (In this example, "Dolby Digital Bitstream" remains.) 7. Repeat steps 4 and 6 for other items. 8. Press [A] to skip back to the setup screen (or press [SETUP]). 96kHz LPCM (96kHz Liner Pulse Code Modulation): If your amplifier is available for 96kHz sampling, select "96kHz j LPCM”. If not, select "48kHz LPCM". j Notes: • When “48kHz LPCM” is set, there are 48kHz LPCM audio signals from the AUDIO OUT jacks, not 96kHz LPCM audio signals. • When playing back the DVD video disc whic...
Эта инструкция также подходит к моделям:DVD-проигрыватели - DVD-SL30 (1.76 mb)
DVD-проигрыватели - DVD-SL30 (1.76 mb)
DVD-проигрыватели - DVD-SL30 (1.76 mb)