Оценок - 3, средний балл: 4.7
(
)
)
|
Фрагмент инструкции
A A password has not been set yet Setup > Playback TV Aspect Parental Lock Disc Menu Language Audio Language Subtitle Language Digital Out Dynamic Range Control Fast Forward with Audio English iginal OFF 7 6 5 4 3 2 1 Change Password? Yes No • If you select “No”, proceed to Step 5. Setup > Playback TV Aspect Parental Lock Disc Menu Language Audio Language Subtitle Language Digital Out Dynamic Range Control Fast Forward with Audio English iginal Password OFF 7 6 5 4 3 2 1 - - - - • Select “Yes” using s / B buttons, then enter a new Yes password using Number buttons. Your setting will be activated. Playing discs A password has been set already Change the password B Setup > Playback TV Aspect Parental Lock Disc Menu Language Audio Language Subtitle Language Digital Out Dynamic Range Control Fast Forward with Audio 4:3 Letter Box English iginal OFF All 6 5 4 3 2 1 Password * * * * • Enter the current password using Number buttons. Setup > Playback TV Aspect Parental Lock Disc Menu Language Audio Language Subtitle Language Digital Out Dynamic Range Control Fast Forward with Audio English iginal OFF 7 6 5 4 3 2 1 Change Password? Yes No • If you select “No”, proceed to Step 5. Setup > Playback TV Aspect Parental Lock Disc Menu Language Audio Language Subtitle Language Digital Out Dynamic Range Control Fast Forward with Audio English iginal OFF 7 6 5 4 3 2 1 Password - - - - • Select “Yes” using s / B buttons, then enter a new password using Number buttons. Your setting will be activated. Yes Note •Press CLEAR button to erase numbers entered incorrectly. • When you forget the pass- word or you want to clear all settings in Parental lock, enter 4,7,3,7 using Number buttons in option window. Password will be cleared and parental levels will be set to All. 91 Press SETUP button to exit SETUP menu. Recording EditingBefore you start Connections Getting Changing Others Espanol Others Troubleshooting Before requesting service for this DVD recorder, check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation. Symptom Remedy Power The power does not turn on. • Check that the AC power cord is connected securely. Picture There is no picture. • Re-connect the connecting cord securely. • The connecting cords are damaged. • The Setup Display appears. Press RETURN button to turn off the display. • Check the connection to your TV (page 13). • Switch the input selector on your TV (such as to "LINE1") so that the signal from the DVD recorder appears on the TV screen. Picture noise appears. • The disc is dirty or flawed. • If the picture output signal from the DVD recorder passes through your VCR to get to your TV, or if you are connected to a combination TV/VIDEO player, the copy-protection signal applied to some DVD programs could affect picture quality. If you still experience this problem even when you connect the DVD recorder directly to your TV, try connecting the DVD recorder to your TV's S-VIDEO input. TV program reception does not fill the screen. •Try to set the channels with "Auto Preset" in SETUP menu (page 18). • Select a channel of any TV program using the CH o / p buttons. TV program pictures are distorted. • Reorient the TV antenna. • Adjust the picture (see the TV's instruction manual). • Place the DVD recorder and TV farther apart. • Place the TV and any bunched antenna cables farther apart. TV channels cannot be changed. • Switch the input to TV. • Connect the antenna cable correctly (page 13). The playback picture or TV program from the equipment connected through the DVD recorder is distorted. • If the playback picture output from a DVD player,VCR, or tuner goes through the DVD recorder before reaching your TV, the copy-protection signal applied to some programs could affect picture quality. Disconnect the playback equipment in question and connect it directly to your TV. Sound There is no sound. • The disc is dirty or flawed. • Re-connect all connections securely. • The connecting cord is damaged. • Check the connections to the amplifier input. • The input source setting on the amplifier is incorrect. • The recorder is in pause mode or in Slow-motion Play mode. • The recorder is in fast forward or fast reverse mode. • If the audio signal does not come through the DIGITAL OUT (COAXIAL) jack, check the Audio Setup settings (pages 88-89). Sound is noisy. • The disc is dirty or flawed. • When playing a DTS-CD, noise may come from the speakers. This DVD recorder is not compatible with DTS-CD. No DTS sound is output • This DVD recorder is not compatible with DTS sound. Others Troubleshooting (cont’d) Symptom Remedy Playback The disc does not play. • No disc is inserted. •A blank disc is inserted. • The disc is upside down. Insert the disc with the labeled side facing up. • The disc is not correctly inserted. • The DVD recorder cannot play certain discs (such as a CDROM) (page 41). • The reg...