Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
1. Click the Next button to begin the Zulu2 installation 2. Turn on the computer to which Hardware Installation: the DX-1 Disc Publisher is 2. After the installation process completes, remove the check from the Reboot Computer box and click Finish. Rebooting will occur after installing SureThing. in the selected workspace. This space boots, you will be notified that the 1. Unpack the DX-1 Disc Publisher and place it connected. Once the computer SureThing CD Labeler Installation: should have enough vertical space to allow new USB connection has been for easy loading of media into the input found. 1. Click the Start button and select Run from the Start menu. Click the Browse hopper and have enough room at the back button and go to the CD/DVD drive, highlight SureThing.exe and click the 3. Click the Next button. to allow for any rejected discs to exit the DX- Open button, then click OK. 1 Disc Publisher without obstacles. 4. Place the DX-1 Disc Publisher 2. Read the Software License and Warranty information and click I Accept Software CD into the CD/DVD 2. Plug the power cord into the back of the DX-1 button to continue the installation of SureThing. ROM drive. Disc Publisher and turn on the switch above the cord. Next, press the power button on the front panel to turn on the printer. 5. Windows 2000: Select the option to Search for a suitable driver, and click 3. Click the Next button at the Welcome screen. Next. Check the CD-ROM Drives Box and click Next. Click the Next button 3. Install the 3 Input Rods and attach the Output Bin using the thumbscrews. 4. To install to the default again when you are notified that the driver has been found. directory, click Next on the The wide Input Rod should be installed in the right-hand position, as marked. Select Destination Directory Windows XP: Select the option to Install from a list or specific location and 4. Install the Microboards ink cartridges. screen. If you wish to install to THE DX-1 DISC PUBLISHER WILL ONLY OPERATE WITH MICROBOARDS INK CARTRIDGE MODELS PRF19ML AND PRF38ML. click Next. Check the Search Removable Media box and click Next. a different location, select that 6. Once the USB drivers have been copied, click the Finish button. location before clicking Next. 7. A second USB driver installation will occur next. Repeat steps 3 through 6. 5. Select adding a desktop A. Remove the tape from the front of the DX-1 Disc Publisher, lift the lid, and shortcut and the location in remove the tape from the print carriage when it is in the center of the printer. 8. The Print driver installation will occur next. Repeat steps 3 through 6 to install which the Start Menu shortcut the print drivers. If the Digital Signature screen appears, click the Yes or Continue B. Raise the cradle latches. Remove the ink cartridges from the packaging will be created, or make no Anyway button at the bottom of the screen. The drivers will then be copied to and carefully remove the plastic tape covering the print head. changes to select the default the hard drive. locations. Click Next when the C. Gently insert the ink cartridges into the appropriate cradles. Do not try to NOTE: The USB and print driver installations may occur in a different order than locations are suitable. force the cartridges into place as doing so may damage the cartridge. that listed above. This will not affect the operation of the DX-1. 6. Click Start on the next screen to install the application. D. Secure the cradle latches and close the lid. The print carriage will return to 9. Verify the installation of the DX-1 Disc Publisher by clicking the Start button. the right neutral position. 7. Click Finish once the installation is complete. You will also have the opportunity Select Printers and Faxes from the Start menu, either through the Settings to register the software on-line. 5. Connect the DX-1 Disc Publisher to the computer using the USB cable provided. menu for Windows 2000 or directly in the Start menu for Windows XP. You will Please be sure the computer is off during this process. see the new printer installed and available for use. 8. The driver and software installation is now complete. The computer will need to be A. Plug the small end of the USB cable into the back of the DX-1 Disc Publisher. DX-1 Disc Publisher controller and Software Installation: rebooted for the software to operate correctly. Click OK to reboot. If you choose not to B. Plug the larger end of the USB cable into an available USB 2.0 The DX-1 Disc Publisher controllers, PrassiTech Zulu 2, and SureThing Disk Labeler reboot at this time, click the Cancel button port on the PC. Confirm that both ends of the cable are securely are included on the Software disc. to reboot later. Remember, the computer connected. DX-1 Disc Publisher Controller Installation: must be rebooted prior to running the DX- 1 6. Turn the PC on at this point. Disc Publisher, Zulu2, or SureThing. 1. Click the Start button and select Run from the Start menu. Click ...