Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Caution! Use of unsuitable liquids may damage the appliance 3. Close the tank cover until you feel it engage. ¦ Only use fresh tap water, softened water or uncarbonated 4. Slide in the water tank all the way (fig. C). mineral water. .......... ¦ If your tap water is very hard, we recommend that you use softened water. ¦ Do not use distilled water, highly chlorinated tap water (> 40 mg/l) or other liquids. You can obtain information about your tap water from your water supplier. The water hardness can be checked with the test strips enclosed. Fill the water tank before each use: 1. Open the appliance door and take out the water tank (fig. A). 2. Fill the water tank with cold water up to the “max” mark (fig. B). The tank must be flush with the water tank recess (fig. D). .... Switching on the appliance : Risk of scalding! When you open the appliance door and remove the cooking containers, hot liquids may squirt out because the cooking containers may have warped. When opening, do not stand too close to the appliance. Open the appliance door carefully. Remove the cooking container carefully. Keep children at a safe distance. Note: Always use the cooking container and wire rack in their standard position (not the other way up). 1. Press the operating mode selector to make it pop out. The appliance switches on. "Appliance is ready for use" appears in the text display. 2. Turn the operating mode selector until the desired operating mode appears on the text display. A default temperature appears on the temperature display. .......................... 3. Turn the temperature selector to change the default temperature. Operating mode Temperature range Default cooking time Steam 35 - 100 °C 20 minutes CircoSteam® 120 - 230 °C 30 minutes Hot air 30 - 230 °C - Reheat 100 - 180 °C 10 minutes Prove 35 - 50 °C 30 minutes Defrost 35 - 60 °C 30 minutes Slow cook 60 - 120 °C - Plate warming 30 - 70 °C - Keep warm 60 - 100 °C - For operating modes that use steam, a default cooking time appears in the electronic clock. The KJand x(cooking time) symbols light up. 4. Turn the rotary selector to change the default cooking time. The new cooking time is saved automatically after 3 seconds. You can also set the cooking time for operating modes that do not use steam (see section: Electronic clock). 5. Press the Start button. If you do not press the Start button, a signal sounds and "Press Start button" appears in the text display. When using eSteam cooking, the cooking time does not start until the heating-up time has elapsed. "Fill water tank?" message This message appears if you set an operating mode and the water tank is only half full. If you think that the water in the water tank is sufficient for the cooking procedure, you can start the appliance. If not, fill the water tank to the "max" mark, slide it back in and start the appliance. Heating indicator The heating indicator displays the rising temperature in the cooking compartment. ¦ Temperature reached (fig. A) ¦ Appliance reheating (fig. B) .... Current temperature Press the ± info button. The current temperature is displayed for 3 seconds. Displaying and changing the cooking time. Press the KJclock function button repeatedly until the KJ and x symbols light up. The current cooking time is displayed. Turn the rotary selector to change the cooking time. The change is saved automatically. Changing the temperature You can change the temperature at any time. To change the temperature, turn the temperature selector until the required temperature is displayed. Pause Briefly press the Stop button to interrupt cooking (pause). The cooling fan may continue running. Press the Start button to restart. If you open the appliance door during cooking, operation is interrupted. Close the appliance door and press the Start button to restart. If you have switched on the Auto start, there is no need to restart the appliance (see section: Basic settings). "Fill water tank" message If the water tank is empty, a signal sounds. “Fill water tank” appears on the display. Cooking is interrupted. 1. Open the appliance door carefully. N.B.: Hot steam will escape. 2. Remove the water tank, fill up to the "max" mark and slide the tank back in. 3. Press the Start button. Switching off the appliance : Risk of scalding! Hot steam may escape when the appliance door is opened. Open the appliance door carefully during or after cooking. When opening the door, do not lean over it. Ensure that, depending on the temperature, steam is not visible. Press and hold the Stop button to stop the cooking operation. If you have set a cooking time, cooking is ended automatically. A signal sounds. Press the KJclock function button to stop the signal. The cooling fan may continue to run when you open the appliance door. Turn the operating mode selector back to the U position and push it in to turn off the appliance. You can see in the temperature display whether there is high or low residual heat in the cooking compartment. Tem...
Эта инструкция также подходит к моделям:Духовые шкафы - C47C62N3/45 (1.08 mb)
Духовые шкафы - C47C62N3GB/45 (1.08 mb)
Духовые шкафы - C47C62N3S/45 (1.08 mb)