Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
1. Press the 0 sensor. The arrow is located behind the WOtimer symbol. 2. Set the time for the timer using the control knob. The time indicator displays the time elapsed on the timer for several seconds. It then runs in the background. The W symbol indicates that the timer is working. Once the time has elapsed A beep will sound. The time indicator displays 00: 00 and WO. The signal can be switched off in advance with the 0 sensor. Check the time elapsed on the timer Press the 0 sensor. The remaining time is displayed for a few seconds. Cancelling the time Press the 0 sensor and reset the time to 00: 00. The time on the timer disappears after a few seconds. Changing the time Press the 0 sensor. Changing the time for the timer using the control knob. Setting the cooking time Delaying the end of the cooking time When a cooking time is programmed for a dish, the oven stops Prerequisite: no programmed work mode can have been working automatically when this time has elapsed. The oven will started. The time must be set. stop heating. 1. Repeatedly press the 0 sensor until the arrow is located Prerequisite: a heating type and temperature must be set. behind the yOend time symbol. The time indicator bars show that the end time has not been Example in the picture: configuration for upper and lower delayed. heat % , 180 ° C, 45 minutes cooking time. 1. Press the 0 sensor twice. The cooking time zO is selected. The configuration is applied. The oven remains in standby; the end time is displayed yO. The text indicator displays [ Function delay] The oven starts working automatically at the appropriate time. .................. 2. Set the time using the control knob. After a few seconds the time will be set. The brackets that appear on the left and right of the cooking time disappear. The zOsymbol comes on. ........................ 2. Change the end time using the control knob. 3. Confirm with the @ sensor. .................. ........................ 3. If the oven has not started working, press the @ sensor. The text indicator displays [ Active] . The time indicator displays the time elapsed of the set time. The duration has finished A beep will sound. The oven will stop heating. The signal can be switched off with the 0 sensor. The oven can be disconnected or a function reselected and programmed. Cancelling the cooking time Press the sensor 0 twice. Reset the cooking time to ‹‹ : ‹ ‹ using the control knob. The time has been cancelled. Changing the cooking time Press the 0 sensor twice. The text indicator displays [Set duration]. Change the cooking time using the control knob. The new cooking time begins. Viewing the time settings The settings can be checked with the 0 sensor. Delaying the end time The end time can be delayed by: ¦ for all types of heating, ¦ many programs, ¦ self- cleaning. Example: the dish is put in the oven at 9: 30 a. m. 45 minutes of cooking are required; so, it will be ready at 10:15 a.m. However, you would like it to be ready at 12: 45 p.m. Change the end cooking time from 10: 15 a.m. to 12: 45 p.m. The oven will begin working at 12: 00 p. m. and finish working at 12: 45 p. m. This function is also compatible with self- cleaning. Cleaning can be programmed at night so the oven is available during the day. Perishable food should not be left for too long in the oven. In the example it starts at 12: 00 . Then the time indicator displays the cooking time progress xO. The duration has finished A beep will sound. The oven will stop heating. The signal can be switched off with the 0 sensor. The oven can be disconnected or a function reselected and programmed. Changing the end time This is possible while the oven is on standby. Press the 0 sensor to change the end time yO and correct it with the control knob. Cancelling the end time This is possible while the oven is on standby. Press the 0 sensor to change the end time yO and turn the control knob to the left until - - :- - is displayed. The programmed time begins. Setting the clock The oven must be switched off before you can set or change the clock. Following a power supply cut After a power supply cut, 4 zeros flash on the time indicator and a beep is heard. 1. Set the current time using the control knob. 2. Press the 0 sensor. The time has been set. Changing the time Example: changing from summer to winter time. 1. Press the 0 sensor twice. The arrow is located behind the 0Otime symbol. 2. Set the time using the control knob. 3. Press the 0 sensor. The new time is set. Hiding the clock The current time appears in the display when the oven is switched off. You can also hide the clock. Then it will only appear when the oven is switched on. For more information, refer to the Basic settings section. Memory The memory can be used to save custom settings for a recipe and access them at any time. The memory function is especially useful when preparing the same recipe frequently. Saving configurations to memory Exception: It is not possible to save the self...
Эта инструкция также подходит к моделям:Духовые шкафы - 3HB670XP/45 (612.39 kb)