Войти:
Оценок - 0, средний балл: 0 ( )

Инструкция по эксплуатации Bosch, модель U1644N0/01

Производитель: Bosch
Размер: 2.38 mb
Название файла:
Язык инструкции:enfr
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


3. Reduce the oven temperature with the temperature selector until 50° C is displayed. Duration: approximately 5 minutes. 4. Then switch the oven off. Oven Cleaning – mini oven Automatic oven cleaning Oven cleaning is a regeneration programme. If the self-cleaning panels in the oven are no longer adequately cleaned during normal day-to-day operation, they will be regenerated with this function. They will then be fully functional again. Take the accessories and utensils out of the oven. Before switching on automatic oven cleaning, thoroughly clean the areas of the oven that do not have self cleaning panels, e.g. enamelled areas such as the oven floor, inner door. This will prevent residue from burning in. You can select the duration of automatic oven cleaning via the electronic clock. The oven becomes very hot during automatic oven cleaning – always keep children away. Setting procedure 1. Rotate the function selector until Oven Cleaning is text displayed. The indicator light ( comes on and In operation is text displayed. The oven heats for 1 hour at 270° C. When Oven Cleaning is complete, a signal sounds, and finished is displayed. Switching off oven cleaning 2. Rotate the temperature selector and the function selector to 0. The oven is cooled by the fan which continues running. When the oven has Remove the grease film from the parts which are not cooled down self-cleaning with a damp cloth. Wipe the salt residue off the self-cleaning parts with a damp cloth. Replacement side, roof and rear panels are available from customer service. Note: exchange of roof and rear panels should only be carried out by an approved service engineer. Removing/installing the oven door Oven door Note: To make the manual cleaning steps following the automatic oven cleaning function more convenient, the appliance features the following options. Removing the oven door 1. Fully open the oven door. 2. Move the catch levers on the right and left-hand sides to the fully open position. 3. Placing the door at an upward angle toward you, grasp the door with both hands and lift it out of the hinges toward you. When pulling the door out, make sure that you do not reach into the hinge. There is a risk of injury. Hanging the oven door 1. Set both hinges into their respective receptacles on the left and right, and swing the oven door downward. 2. Close the catch levers on the left and right. 3. Close the oven door. 46 47 Lowering the In order to clean the oven ceiling more easily turn heating element down the grill heating element. Warning: The heating element must have cooled down. 1. Press the retaining clip upward until you hear the click. 2. Hold the heating element and fold it down. After cleaning Fold the heating element back up. Pull the retaining clip forward and press it up until it clicks into place. Shelf support Removing 1. Pull the shelf support out of its bearing bush. 2. Remove the shelf support. Clean the shelf support using washing-up liquid and pan scrapers or brushes. Attaching After cleaning, re-install the shelf support, following the instructions in reverse order. Telescopic pull-outs Removing 1. Press the coach spring down. liquid and pan scrapers or brushes. Attaching Insert the telescopic pull-out at the rear. down until it locks into position. pull-outs have been inserted. telescopic pull-outs are pulled out Note Push the telescope upwards and remove it. Clean the telescopic pull-outs using washing-up Insert the telescopic pull-out into the guide and press Always insert the telescopic pull-outs all the way. Do not close the oven door until all telescopic Attention: The telescopic pull-outs become hot when the oven is on. Risk of burns when the Mini oven Only 1 pair of telescopic rails may be installed in the mini oven ( shelf position 1 or 2 ). Service and Repair Information In the event of problems or repairs that you cannot solve or perform yourself, our customer service will be happy to help. Check the customer service directory for a customer service facility in your area. Caution: Calling the customer service because of an operator error can be very costly! E No and FD No You can find this information on the appliance’s nameplate. The nameplate is located on the appliance, behind the oven door, on the left bottom edge of the oven. In the event of a customer service request, please have the following information handy: E-Number FD Replacing the oven door Replacing the oven light Caution: Unplug the appliance or remove the fuse! By actuating the miniature circuit-breaker or by unscrewing the fuses in the fuse box in your house. 1. To prevent damage, place a dish towel into the cold oven. 2. Unscrew the lamp cover by turning it counter-clockwise. 3. Replace the lamp. –Type: Incandescent bulb E 14, 220 – 240 V, 40 W, heat-resistant to 300° C –You may obtain this bulb from your customer service or from your appliance dealer. Remove the defective oven door seal by simply unhooking it. You may obtain the new oven door...

Эта инструкция также подходит к моделям:
Духовые шкафы - U1644N0/03 (2.38 mb)
Духовые шкафы - U1644N0/10 (2.38 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории