Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
The symbol for the time function in the foreground is in brackets. To view the timer U, the cooking time r, the end time p or the actual time 0, press the 0 sensor repeatedly until the brackets are around the required symbol. The corresponding value will be shown for a few seconds on the display panel. End time The oven allows you to set the time when you want the food ready. The oven switches on automatically and switches off at the set time. E. g. the food may be placed in the oven in the morning and the oven set so that it is ready at midday. Please ensure that the food will not go off if it is in the oven for too long. Example in the picture: It is now 10: 30 AM, the cooking time is 45 minutes and the oven should switch off at 12: 30 PM. 1. Set the function control knob. 2. Set the temperature control knob. 3. Press the 0 button twice. 4. Set the cooking time with the @ or Abuttons. 5. Press the 0 button. The brackets are shown next to p. The time the dish will be ready is displayed. 6. Delay the end time using the buttons @ or A. The oven displays the programmed time after a few seconds and is set to standby. The time when the dish will be ready is displayed and the end time psymbol will be shown in brackets. The symbols U and 0 turn off. When the oven is turned on, cooking time progress is shown and the symbol rappears in brackets. The symbol p is turned off. The cooking time has finished A beep will sound. The oven will stop heating. The display panel will show ‹‹ : ‹‹ . Press the 0 button. Programme a new cooking time with the @ or A buttons. Or press the 0 button twice and turn the function control knob to the zero setting. The oven is off. Changing the end time Change the end time using the buttons @ or A. The new time is shown after a few seconds. If the timer has been programmed, first press the 0button twice. Do not change the end time if the cooking time has already started to count down. The final result may not be the same. Cancelling the end time Reset the end time to the current time by pressing A. The new time is shown after a few seconds. The oven switches on. If the timer has been programmed, first press the 0 button twice. Viewing the time settings If several time functions are programmed, the corresponding symbols light up on the display panel. The symbol for the time function in the foreground is in brackets. To view the timer U, the cooking time r, the end time por the actual time 0, press the 0 sensor repeatedly until the brackets are around the required symbol. The corresponding value will be shown for a few seconds on the display panel. Time Once the oven has been connected or after a power cut, the symbol 0 and four zeros are shown on the display panel. Set the time. 1. Press the 0 button. The display panel displays the time ‚.. ‹‹ . 2. Set the time with the buttons @ or A. The programmed time is displayed after a few seconds. Changing the time No other time function can be programmed. 1. Press the 0 button four times. The time symbols light up on the display panel, the brackets are located next to 0. 2. Adjust the time with the buttons @ or A. The programmed time is displayed after a few seconds. Hiding the clock You can hide the clock. For more information, please refer to the section Changing the basic settings. Childproof lock The oven includes a childproof lock to prevent it being turned on accidentally. The oven does not react to any setting. The timer and time can be programmed when the childproof lock is on. Activating the childproof lock Set the function control knob to the zero setting. Press the D button for approximately four seconds. The display panel shows the symbol D. The childproof lock is now activated. Turning off the childproof lock Press the D button for approximately four seconds. The D symbol on the display panel goes off. The childproof lock is now deactivated. Changing the basic settings This oven has different basic settings. The settings can be adapted to the user's own needs. Basic setting Selection ‹ Selection ‚ Selection . Selection „ ™‹ Display brightness - low medium high* ™‚ Duration of signal after the cooking time or - approx. 10 sec approx. 2 min* approx. 5 min the time set on the timer has elapsed ™. Time indicator only when working always* - - ™„ Time until a setting is applied - approx. 2 sec approx. 5 sec* approx. 10 sec ™‡ Select default settings for all values. no* yes - - * Default setting The oven must be switched off. 1. Press the 0 button for approximately 4 seconds. The display panel will show the current basic setting for the brightness of the indicators, e.g. ™‹ for the Selection „ . 2. Set the basic setting using the buttons @ or A. 3. Confirm with the 0 button. The display panel shows the following basic setting. Using the button 0 select the levels and using the buttons @ or A make the setting. 4. Press the 0 button for approximately 4 seconds. All basic settings have been applied. The basic settings can be changed again at any...