The descaling consists of: ¦ Descale ( approx. 30 minutes), then empty the evaporator dish and refill the water tank ¦ 1st rinse ( 20 seconds), then empty the evaporator dish ¦ 2nd rinse (20 seconds), then remove the remaining water All three steps must be completed in full. The appliance is ready for operation again only after the 2nd rinse. Descaler Only use the liquid descaler recommended by the after-sales service for descaling (product no. 311 138, also available online from the eShop) . Other descalers may damage the appliance. 1. Prepare a descaling solution by mixing 300 ml water and 60 ml liquid descaler. 2. Empty the water tank and fill with descaling solution. Caution! Risk of surface damage: If descaler comes into contact with the front of the appliance or any other sensitive surfaces, wash it off immediately with water. Starting descaling The cooking compartment must have cooled down completely. 1. Press the operating mode selector to make it pop out. The appliance switches on. 2. Turn the operating mode selector to I Descale. 3. Slide in the water tank containing the descaling solution and close the appliance door. 4. Press the Start button. The descaling process starts. The light in the cooking compartment remains switched off. Emptying the evaporator dish and refilling the water tank An audible signal sounds after approx. 30 minutes. " Empty evaporator dish and refill water tank" appears in the text display. 1. Open the appliance door. 2. Remove the descaling solution from the evaporator dish using the cleaning sponge provided. 3. Rinse the water tank thoroughly, fill with water and reinsert. "Appliance ready to rinse" and "1st rinse" appear in the text display. 4. Close the appliance door. 1st rinse Press the Start button. The appliance starts rinsing. "1st rinse" appears in the display. Empty evaporator dish After 20 seconds, "Empty evaporator dish" appears in the text display. 1. Open the appliance door. 2. Thoroughly rinse out the cleaning sponge. 3. Remove the remaining water from the evaporator dish using the cleaning sponge. 4. Close the appliance door. 2nd rinse Press the Start button. The appliance starts rinsing. " 2nd rinse" appears in the display. Removing the remaining water After 20 seconds, " End" and " Empty evaporator dish" appear in the text display. 1. Open the appliance door. 2. Remove the remaining water from the evaporator dish using the cleaning sponge. 3. Wipe out the cooking compartment using the cleaning sponge and then dry with a soft cloth. 4. Turn the operating mode selector back to the U position. 5. To turn off the appliance, press in the operating mode selector so that it clicks into place. Descaling is complete. Cancelling the descaling Note: After cancelling the descaling, you must rinse the appliance twice. The appliance is locked against other applications until the second rinsing operation is complete. 1. Press and hold the Stop button to cancel the descaling process. To ensure that no descaling solution remains in the appliance, it must be rinsed twice after a cancellation. 2. Press the Start button. "Empty evaporator dish and refill water tank" appears in the text display. Now proceed as described in the " Emptying the evaporator dish and refilling the water tank" section. Descaling the evaporator dish only You can also use " Descale" if you do not wish to descale the whole appliance, but only the evaporator dish in the cooking compartment. The only difference is as follows: 1. Prepare a descaling solution by mixing 100 ml water and 20 ml liquid descaler. 2. Completely fill the evaporator dish with descaling solution. 3. Fill the water tank with water only. 4. Start " Descale" as described. You can also descale the evaporator dish manually. Removing and fitting the appliance door You can remove the appliance door to clean it more thoroughly. : Risk of injury! The hinges of the appliance door may snap shut with great force. Always open the hinge locking lever fully when removing the appliance door and close it fully after refitting. Do not reach into the hinge. : Risk of injury! If the appliance door has only been unhinged on one side, do not reach into the hinge. The hinge can snap back with great force. Call the aftersales service. Removing the appliance door 1. Open the appliance door fully. 2. Fold out the locking levers on the left and right fully ( figure A) . The hinges are secured and cannot snap closed. 3. Close the appliance door until you feel some resistance. 4. With both hands, grip the door on the left and right- hand side, close the door a little more and pull it out (Fig. B) . ( Fitting the appliance door Refit the appliance door after cleaning. 1. Insert the hinges in the left and right- hand bracket (figure C). The notch on both hinges must engage. 2. Open the appliance door fully. 3. Close the locking levers on the left and right- hand side fully (figure D). ' The appliance door is secured and can no longer be removed. 4. Close the app...

Эта инструкция также подходит к моделям:
Духовые шкафы - C47C42S0/04 (964.76 kb)
Духовые шкафы - C47C42S0GB/03 (964.77 kb)