Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
g. egg white) immediately ¦ use 3 CircoTherm ® whenever possible. This operating mode creates less dirt ¦ Use the universal pan to bake very moist cakes ¦ use suitable ovenware when roasting (e. g. roasting dish) or a roasting sheet ( see section: Accessories) Self-cleaning surface The back wall of the cooking compartment is coated with self- cleaning enamel. This coating absorbs and disintegrates splashes from baking and roasting while the oven is in operation. Large splashes only disappear after the oven has been used several times. Discolouration on the rear wall does not affect the self-cleaning function. Caution! Damage to surfaces on self-cleaning areas due to applying oven cleaner. Never clean the self-cleaning surfaces with oven cleaner. If oven cleaner accidentally gets onto self-cleaning surfaces, remove it immediately with a sponge and plenty of water. Caution! Damage to surfaces on self-cleaning areas due to the use of abrasive and acidic cleaning agents and aids. Do not use cleaning agents containing abrasive substances or acids. Do not use abrasive cleaning aids such as steel wool or scourers. EasyClean ® Your appliance comes with an > EasyClean ® function to make cleaning the cooking compartment easier. An automatically controlled vaporisation of soapy water loosens residues and makes it easier to remove them afterwards. In the case of persistent dirt, you can ¦ allow the soapy water to penetrate for a while before switching on EasyClean ¦ rub detergent onto the dirty surfaces before switching on the cleaning aid ¦ repeat the EasyClean® function once the cooking compartment has cooled Preparation and switching on EasyClean ® only starts when the cooking compartment is cool. : Risk of scalding and surface damage! Never pour water into the cooking compartment when it is hot. Water vapour will be created and the enamel may be damaged because of the change in temperature. 1. Remove the accessories from the cooking compartment. 2. Carefully pour 0.4 litres of water (not distilled water) with some detergent into the base trough of the cooking compartment ( Fig. A) . 3. Close the appliance door. 4. Switch on EasyClean ® . "EasyClean in operation" appears in the text display and “’ † in the temperature display. If, after EasyClean is switched on, " Not possible" appears in the text display and oe or • and “’ † appear alternately in the temperature display, the cooking compartment has not completely cooled down. Wait until the cooking compartment has cooled down and switch EasyClean® on again. Once EasyClean® has finished, the cooking compartment light switches on and "EasyClean complete" appears in the text display. A signal sounds. 5. Press the clock function button to exit the clock function. Cleaning up and switching off Do not leave the remaining water in the cooking compartment for a long time ( e.g. overnight) . 1. Open the appliance door and remove the remaining water with an absorbent sponge cloth (Fig. B) . 2. Clean the cooking compartment with a sponge cloth, a soft brush or a plastic saucepan scrubber. Note: You can remove any remaining, persistent residue with a glass scraper for glass ceramic. 3. Remove limescale with a cloth soaked in vinegar, then wipe with clean water and rub dry with a soft cloth. Remember to dry under the door seal. 4. Turn the operating mode selector back to the U position. 5. After cleaning, leave the appliance door ajar in the stop position ( approx. 30° ) for approx. 1 hour to allow the enamel surfaces in the cooking compartment to dry thoroughly. Rapid drying 1. After cleaning, leave the appliance door ajar in the stop position (approx. 30° ) . 2. Set 3 CircoTherm ® at 50 °C. 3. After 5 minutes, switch off the appliance and close the appliance door. Removing and fitting the appliance door You can remove the appliance door to clean it more thoroughly. : Risk of injury! The hinges of the appliance door may snap shut with great force. Always fully turn the two locks for fitting and removing the appliance door. : Risk of injury! If the appliance door has been removed without turning both locking levers to their limit stops, the hinge may snap shut. Do not reach into the hinge. Call the aftersales service. 27 Removing the appliance door 1.Open the left and right-hand hinge lock (Fig. A). To do this, push the hinge lock (Fig. B) fully upwards on both sides with a screwdriver. Hinge lock closed (Fig. C) Hinge lock open (Fig. D) 2.Open the appliance door a little (Fig. E). 3.Using a coin, fully turn both the left and right-hand locks on the inside of the appliance at the bottom (Fig. F). Left lock: clockwise Right lock: anti-clockwise 4. Close the appliance door a little, until you feel the locks engage. The door can now no longer be opened or closed. 5. Lift the door handle slightly using both thumbs and lift out the appliance door (Fig. G). Fitting the appliance door 1. Hold the appliance door and raise the door handle slightly with both thumbs (Fig. A). 2. Fit the ...