Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
The edges of thin trays cannot be completely enamelled. As this purpose. a result, these edges can be rough. Anti-corrosion protection is still guaranteed, however. Appliance part Cleaning agent/aid Enamel surfaces (smooth surface) To facilitate cleaning, you can switch on the interior lighting and detach the appliance door if necessary. Apply commercially available washing-up liquid or a vinegar solution with a soft, damp cloth or chamois; dry with a soft cloth. Loosen baked-on food residues with a damp cloth and detergent. We recommend using oven cleaner if the oven is very dirty. When cleaning using an oven cleaner, check the manufacturer's instructions. Leave the cooking compartment open to dry after cleaning. Self-cleaning surfaces Please see the notes in section: Self-cleaning surfaces (rough surface) Door seal Hot soapy water Hook-in rack/telescopic shelf Hot soapy water Accessories Soak in hot soapy water, clean with a brush and sponge or wash in the dishwasher. Keeping the appliance clean To avoid getting the cooking compartment dirty, . clean the cooking compartment after each use, as dirt will bake on the next time it is heated up, and this can only be removed with difficulty . always remove flecks of limescale, grease, starch and albumin (e.g. egg white) immediately . use .. CircoTherm® whenever possible. This operating mode creates less dirt . Use the universal pan to bake very moist cakes . use suitable ovenware when roasting (e.g. roasting dish) or a roasting sheet (see section: Accessories) Self-cleaning surfaces The back panel and side panels of the cooking compartment are coated with a highly porous ceramic layer. This coating absorbs and disintegrates splashes from baking and roasting while the oven is in operation. The higher the set temperature and the longer the oven is in operation, the better the cleaning result. Large splashes only disappear after the oven has been used several times. Residues can be removed with water and a soft sponge. Colour variations on the self-cleaning surfaces have no effect on the self-cleaning function. 25 Caution! .. Damage to surfaces on self-cleaning areas due to applying oven cleaner.Never clean the self-cleaning surfaces with oven cleaner. If oven cleaner accidentally gets onto self-cleaning surfaces, remove it immediately with a sponge and plenty of water. .. Damage to surfaces on self-cleaning areas due to the use of abrasive and acidic cleaning agents and aids. Do not use cleaning agents containing abrasive substances or acids. Do not use abrasive cleaning aids such as steel wool or scourers. Oven cleaning The back and side panels of the cooking compartment are coated with a highly porous ceramic layer. This coating absorbs and disintegrates splashes from baking and roasting while the oven is in operation. If these self-cleaning surfaces (rough surfaces) in the oven no longer clean themselves adequately, they can be regenerated using the .. Oven cleaning operating mode. ....Risk of burns! The appliance becomes very hot during Oven cleaning. Keep children away from the appliance. Preparing for oven cleaning 1. Remove accessories and hook-in racks, telescopic shelves or separate fitting systems from the cooking compartment. 2. Clean the enamel surfaces (smooth surfaces) to avoid any lasting stains (see section: Cleaning the cooking compartment). Starting oven cleaning 1. Set the operating mode selector to ..Oven cleaning. 2. Turn the temperature selector to set the desired cleaning setting. Your setting is automatically accepted after 10 seconds and Oven cleaning starts. .. and the selected operating time setting light up on the clock display. The operating time cannot be changed. You can activate the preselection mode in the 10 seconds before Oven cleaning starts. When the operating time has elapsed, a signal sounds, ..:.... appears on the clock display and the .. symbol flashes. Ending/cancelling oven cleaning 1. Turn the operating mode selector back to the .. position. 2. Press the clock function button. Removing and fitting the appliance door You can remove the appliance door to clean it more thoroughly. ....Risk of injury! The hinges of the appliance door may snap shut with great force. Always fully turn the two locks for fitting and removing the appliance door. ....Risk of injury! If the appliance door has been removed without turning both locking levers to their limit stops, the hinge may snap shut. Do not reach into the hinge. Call the after..sales service. Removing the appliance door 1.Open the left and right-hand hinge lock (Fig. A). To do this, push the hinge lock (Fig. B) fully upwards on both sides with a screwdriver. Hinge lock closed (Fig. C) Hinge lock open (Fig. D) 2.Open the appliance door a little (Fig. E). 3.Using a coin, fully turn both the left and right-hand locks on the inside of the appliance at the bottom (Fig. F). Left lock: clockwise Right lock: anti-clockwise 4. Close the appliance door a little, until you feel the locks ...