Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Caution! Damage to surfaces on self-cleaning areas due to the use of abrasive and acidic cleaning agents and aids. Do not use cleaning agents containing abrasive substances or acids. Do not use abrasive cleaning aids such as steel wool or scourers. Removing and fitting the appliance door You can remove the appliance door to clean it more thoroughly. : Risk of injury! The hinges of the appliance door may snap shut with great force. Always fully turn the two locks for fitting and removing the appliance door. : Risk of injury! If the appliance door has been removed without turning both locking levers to their limit stops, the hinge may snap shut. Do not reach into the hinge. Call the aftersales service. Removing the appliance door 1.Open the left and right-hand hinge lock (Fig. A). To do this, push the hinge lock (Fig. B) fully upwards on both sides with a screwdriver. Hinge lock closed (Fig. C) Hinge lock open (Fig. D) 2.Open the appliance door a little (Fig. E). 3.Using a coin, fully turn both the left and right-hand locks on the inside of the appliance at the bottom (Fig. F). Left lock: clockwise Right lock: anti-clockwise 4.Close the appliance door a little, until you feel the locks engage. The door can now no longer be opened or closed. 5. Lift the door handle slightly using both thumbs and lift out the appliance door (Fig. G). Fitting the appliance door 1. Hold the appliance door and raise the door handle slightly with both thumbs (Fig. A). 2.Fit the appliance door in the left and right-hand guide rollers simultaneously (Fig. B). 3.Ensure that the appliance door does not tilt unevenly and that it is properly fitted in place (Fig. C). 4.Use a coin to release both locks on the appliance door (Fig. D). Left lock: anti-clockwise Right lock: clockwise $ % & ' ( $ % & 19 5.Open the appliance door a little wider and then close it. : Risk of injury from hinge locks which have not been properly closed! The appliance door may detach itself. You may be injured and the appliance door damaged. After refitting the door, always close the left and right-hand hinge locks. 6. Close the left and right-hand hinge locks (Fig. E). To do this, push the hinge lock (Fig. F) fully downwards on both sides with a screwdriver. Cleaning the door panels To facilitate cleaning, you can remove the door panels from the appliance door. : Risk of injury! The components inside the appliance door may have sharp edges. Take care not to cut yourself. Wear protective gloves. : Risk of injury! The appliance must not be used again until the door panels and appliance door have been correctly fitted. Removing the door panel Note: Before removing, make a note of which way round the door panel is fitted, so that it is not refitted the wrong way round. 1.Unhook the appliance door and lay it on a soft, clean surface with the front side facing downwards (see section: Removing and installing the appliance door). 2.Carefully lift the door panel slightly and remove it in the direction of the arrow (fig. A). Removing the intermediate panel Note: Before removing, make a note of the position in which the intermediate panel is fitted, so that you do not refit it the wrong way round later. 1.Remove the seal. Pull the seal outwards and remove it upwards (fig. B). 2.Release and remove the retainer (fig. C). 3. Lift the intermediate panel slightly and take it out (fig D). Cleaning Clean the door panels with glass cleaner and a soft cloth. Caution! Do not use any sharp or abrasive medium or a glass scraper. The glass could be damaged. Fitting the intermediate panel Note: During installation, make sure that the lettering "top right" is upside down at the bottom left. 1. Insert the intermediate panel towards the back as far as it will go (fig. A). 2. Hook in the seal on both sides (fig. B). 3. Insert the retainer (fig C). 4. Press down on the retainer until it locks into position (fig. D). ' $ % & $ % & Fi t t i ng t h e d oor panel 1. Insert the door panel at an angle towards the rear into the retainers ( fig. E) . 2. Press down on the side of the door panel until it locks into place ( fig. F) . ' 3. Refit the appliance door. Cleaning the hook-in racks You can remove the hook-in racks for easier cleaning. : Risk of burning due to hot components in the cooking compartment! Wait until the cooking compartment has cooled down. 1. Push the hook-in rack upwards at the front and unhook to the side ( figure A) . 2. Pull the hook- in rack forwards at the rear and unhook to the side ( figure B) . $% 3. Clean the hook-in rack with washing- up liquid and a sponge or brush. 4. Align the hook-in rack with the indentation ( a) facing downwards, so that the shelf heights match. 5. Insert the hook-in rack at the rear as far as it will go and push to the rear (figure C) . 6. Insert the hook-in rack at the front as far as it will go and push downwards (figure D) . & Faults and repairs It is not always necessary to call the after- sales service. : Risk of electric shock! Sometime...
Эта инструкция также подходит к моделям:Духовые шкафы - B44S32N3GB/04 (1.68 mb)