Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Note: You can remove any remaining, persistent residue with a glass scraper for glass ceramic. 3. Remove limescale with a cloth soaked in vinegar, then wipe with clean water and rub dry with a soft cloth. Remember to dry under the door seal. 4. After cleaning, leave the appliance door ajar in the stop position (approx. 30° ) for approx. 1 hour to allow the enamel surfaces in the cooking compartment to dry thoroughly. Rapid drying 1. After cleaning, leave the appliance door ajar in the stop position ( approx. 30°) . 2. Set 3 CircoTherm ® at 50 ° C. 3. After 5 minutes, switch off the appliance and close the appliance door. 19 Removing and fitting the appliance door You can remove the appliance door to clean it more thoroughly. a=Risk of injury! The hinges of the appliance door may snap shut with great force. Always open the hinge locking lever fully when removing the appliance door and close it fully after refitting. Do not reach into the hinge. a=Risk of injury! If the appliance door has only been unhinged on one side, do not reach into the hinge. The hinge can snap back with great force. Call the aftersales service. Removing the appliance door 1.Open the appliance door fully. 2.Open the locking levers on the left and right-hand side fully. The hinges are secured and cannot snap closed. 3. Close the appliance door until resistance becomes noticeable (figure A) 4.With both hands, grip the door on the left and right-hand side, close the door a little more and pull it out (figure B). Fitting the appliance door 1. Insert the hinges in the left and right-hand holders (figure C). The notch on both hinges must engage. 2.Open the appliance door fully. 3. Close the locking levers on the left and right-hand side fully (figure D). The appliance door is secured and can no longer be removed. 4. Close the appliance door. Cleaning the door panels To facilitate cleaning, you can remove the door panels from the appliance door. a=Risk of injury! The components inside the appliance door may have sharp edges. Take care not to cut yourself. Wear protective gloves. a=Risk of injury! The appliance must not be used again until the door panels and appliance door have been correctly fitted. Removing the door panel 1.Unhook the appliance door and lay it on a soft, clean surface with the front side facing downwards (see section:Removing and installing the appliance door). 2. Grip the door panel next to the hinges and pull it out of the plug-in holders (not visible). 3. Lift the door panel slightly and remove it in the direction of the hinges. Removing the intermediate panel Before removing, make a note of the position in which the intermediate panel is fitted, so that you do not refit it the wrong way round later. 1.Press the left and right-hand holders outwards. The intermediate panel disengages upwards. 2. Lift the intermediate panel slightly and take it out. Cleaning Clean the door panels with glass cleaner and a soft cloth. Caution! Do not use any sharp or abrasive medium or a glass scraper. The glass could be damaged. Fitting the intermediate panel 1. Insert the intermediate panel on the left and right into the supports. 2.Push the intermediate panel downwards in the retainers. Fi t t i n g t h e door pan e l 1. Insert the door panel on the left and right into the supports. 2. Press the door panel downwards into the plug-in holders. 3. Refit the appliance door. Cleaning the cooking compartment ceiling The grill element can be folded down to allow quick and easy cleaning of the cooking compartment ceiling. a= Risk of burning due to hot components in the cooking compartment! Wait until the cooking compartment has cooled down. 1. Pull the grill element retaining bracket towards the front and push it upwards until you hear the grill element disengage (figure A). 2. Hold the grill element and fold it downwards (figure B) . 3. Clean the cooking compartment ceiling. 4. Pull the retaining bracket towards the front and keep it pushed upwards. 5. Fold the grill element upwards, until it clicks into place. Cleaning the hook- in racks You can remove the hook-in racks for easier cleaning. a= Risk of burning due to hot components in the cooking compartment! Wait until the cooking compartment has cooled down. 1. Push the hook-in rack upwards at the front and unhook to the side ( figure A) . 2. Pull the hook-in rack forwards at the rear and unhook to the side ( figure B) . 3. Clean the hook-in rack with washing- up liquid and a sponge or brush. 4. Align the hook-in rack with the indentation ( a) facing downwards, so that the shelf heights match. 5. Insert the hook- in rack at the rear as far as it will go and push to the rear ( figure C) . 6. Insert the hook-in rack at the front as far as it will go and push downwards (figure D). Faults and repairs It is not always necessary to call the after-sales service. a= Risk of electric shock! Sometimes, you can find a remedy yourself. You will find some ¦ Work on the appliance electronics may only ...
Эта инструкция также подходит к моделям:Духовые шкафы - B15M42N0EU/35 (1.65 mb)
Духовые шкафы - B15M42S0EU/01 (1.65 mb)
Духовые шкафы - B15M42S0EU/35 (1.65 mb)
Духовые шкафы - B15M42W0EU/01 (1.65 mb)