Оценок - 3, средний балл: 4.7
(
)
)
|
Фрагмент инструкции
Si tiene dudas o comentarios, contactenos. 1-800-4-DEWALT • INSTRUCTIVO DE OPERACION, CENTROS DE SERVICIO Y POLIZA DE INSTRUCTION MANUAL GARANTIA. ADVERTENCIA: LEASE ESTE INSTRUCTIVO ANTES DEGUIDE D’UTILISATIONUSAR EL PRODUCTO. MANUAL DE INSTRUCCIONES DC800 Heavy-Duty 36V 1/2" (13 mm) Cordless Impact Wrench / Cle a chocs industriel de 1/2 po (13 mm) sans fil de 36 volts / Llaves de impacto inalambricas de 36 V de 13 mm (1/2") para trabajo pesado DC810 Heavy-Duty 28V 1/2" (13 mm) Cordless Impact Wrench / Cle a chocs industriel de 1/2 po (13 mm) sans fil de 28 volts / Llaves de impacto inalambricas de 28 V de 13 mm (1/2") para trabajo pesado DC815 Heavy-Duty 28V 1/4" (6.35 mm) Cordless Impact Driver / Mandrin a chocs industriel de 1/4 po (6,35 mm) sans fil de 28 volts / Destornillador de impacto inalambricas de 28 V de 6,35 mm (1/4") para trabajo pesado DEWALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286 (MAR08) Part No. 658851-00 DC800, DC810, DC815 Copyright © 2006, 2007, 2008 DEWALT The following are trademarks for one or more DEWALT power tools: the yellow and black color scheme; the “D” shaped air intake grill; the array of pyramids on the handgrip; the kit box configuration; and the array of lozenge-shaped humps on the surface of the tool. Defi nitions: Safety Guidelines The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to these symbols. DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. CAUTION: Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage. IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY DEWALT TOOL, CALL US TOLL FREE AT: 1-800-4-DEWALT (1-800-433-9258) WARNING: To reduce the risk of injury, read the instruction manual. General Power Tool Safety Warnings WARNING! Read all safety warnings and instructions Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. 1) WORK AREA SAFETY a) Keep work area clean and well lit. Cluttered or dark areas invite accidents. b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. 2) ELECTRICAL SAFETY a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. b) Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. f) If operating a power tool in a damp location is unavoidable, use a ground fault circuit interrupter (GFCI) protected supply. Use of a GFCI reduces the risk of electric shock. 3) PERSONAL SAFETY a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. b) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. c) Prevent unintentional starting. Ensure the switch is in the off position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in perso...