Оценок - 3, средний балл: 4.7
(
)
)
|
Фрагмент инструкции
Keep your hands and feet well away from the work piece. Never feed the blade into the work piece until the blade is at full speed. If the blade is not at full speed, the saw may kick back causing serious personal injury. Use proper blade for the particular cutting application. • Put on eye protection. • Clear the saw of any foreign material. • Make sure the work piece is held securely in place. Hold smaller pieces in a • Mark out the line to be cut so it is easily visible. • Start inside the area to be cut out. • Depress the lock-on button and press the trigger to start the saw. • Set the shoe against the work piece. • When the blade reaches full speed, slowly feed the blade into the work vise or attach to the workbench with clamps. • Mark out the line to be cut so it is easily visible. • Pull the trigger to start the saw. • Set the shoe against the work piece. • When the blade reaches full speed, slowly 15 16 MAINTENANCE AND CLEANINGMETAL CUTTING METAL CUTTING Never use gasoline or any flammable liquid as a lubricant. Sparking from the motor may cause it to ignite into flames. OIL • When cutting metals other then copper, brass or aluminum, always use a lubricant, such as cutting oil, to keep the blade cool. This will prolong the life of the blade as well as speeding up the cutting process. • Make sure the work piece is held securely in place. Hold pipe or conduit, in a vise or attach to the workbench • To eliminate vibration, always cut close to the clamping • When cutting thin sheets of metal, place a vibration and prevent tearing. 17 Use only mild soap and a damp cloth to clean the tool. Never let any liquid get inside the casing. Never immerse any part of the tool in a liquid. Always keep the ventilation openings clear. Always clean the battery pack using only a dry cloth. Do not use liquids. Always unplug the charger before cleaning it. Regularly clean the ventilation slots in your tool and charger using only a soft brush or dry cloth. Inspect all mounting screws regularly. Tighten any loose screws. Failure to keep the mounting screws tight could result in serious injuries. Never open the Cordless Reciprocating Saw case, battery pack or charger. Do not attempt to repair the Cordless Reciprocating Saw, battery pack or charger yourself. Opening any of these parts will void your warranty. ACCESSORIES Use only accessories that are recommended by the manufacturer Accessories that may be suitable for one tool may become another tool. Always attach grounded (3-prong) extension If you must use an extension cord, be sure the amount of current necessary for your power tool. If not, your tool may experience a loss of power, excessive voltage drop or overheating. number, the heavier the cord (see table on 18 Always remove the battery pack before attempting cleaning or maintenance. This Cordless Reciprocating Saw is lubricated before it leaves the factory. This lubrication should last for the life of the tool. No further lubrication is required. RECOMMENDED SIZES OF EXTENSION CORDS 120 VOLT AC 60 HZ TOOLS TOOL CURRENT RATING CONDUCTOR SIZE IN A.W.G AMPERE 10FT. 25FT. 50FT. 100FT. 3-6 18 18 18 18 6-8 18 18 18 16 8-10 18 18 18 14 10-12 16 16 14 14 12-16 14 12 12 - 16-20 12 12 12 - SPECIFICATIONS SPECIFICATIONS Voltage 18V Length of Stroke 22mm (7/8") Switch Variable Speed Charger Input 120V 60Hz Charging Time Approx. 3-5 hours No Load Speed (RPM) 0-2600/min Battery Type Ni-Cad PROTECTING THE ENVIRONMENT BATTERIES Alltrade batteries can be recharged many times. At the end batteries with due care for our environment. Ni-Cad and Ni-MH batteries are recyclable. Take them to your local recycling center or call 1-800-CLEANUP. Collected batteries will be recycled or disposed OTHER CONSUMER DO-IT-YOURSELF (DIY) TOOLS Alltrade offers a full range of Kawasaki™ tools that make DIY jobs easy. If you would like further information on the following products, please contact Alltrade Customer Service Department at 1-800-590-3723. Cordless Drills/Screwdrivers Impact Wrenches Sanders Jigsaws Circular Saws Angle Grinders Reciprocating Saws Routers Rotary Tools Corded and Cordless Multi-Purpose Tools Wide Range of Accessories and more 19 20 2 YEAR LIMITED HOME USE WARRANTY Express and Exclusive Limited Home Use Warranty to Original Retail Buyer Alltrade Tools LLC (hereinafter "Alltrade") expressly warrants to the original retail purchaser of the accompanying KAWASAKI(tm) portable power tool and no one else all parts of the product (except those parts referred to below which are specifically excluded from such warranty (see Exclusions)) to be free from defects in materials and workmanship for a period of two years from original date of purchase. SPECIAL WARRANTY NOTE TO CONTRACTORS AND COMMERCIAL USERS: This Kawasaki(tm) portable power tool is offered as a home use tool and carries a HOME USE WARRANTY. This tool is made for home use in the execution of projects and repairs in and around the home. Use of the tool for COMMERCIAL PURPOSES O...