Войти:
Оценок - , средний балл: ( )

Инструкция по эксплуатации Campbell Hausfeld, модель DG190600CK

Производитель: Campbell Hausfeld
Размер: 987.13 kb
Название файла: 59ca546b-4a0a-4f01-b8d5-65387c8340c3.pdf

Язык инструкции:enesfr

Документ загружается, подождите пожалуйста
Документ загружается, подождите пожалуйста

Фрагмент инструкции


• Do not attempt to repair power cord. PERSONAL SAFETY Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. Length of Cord in Feet 25 50 100 Minimum Wire Size (AWG) of Extension Cord 150 AWG Size of Cord 18 18 18 16 2 DG190600CK and DG190625DI General Power Tool Safety Warnings (Cont’d.) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. 5. Use clamps or another practical way to secure the workpiece to a stable platform. Never hold work in your hand, lap, or against other parts of your body when operating tool. TOOL USE AND CARE Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. Store idle power tools out of the reach of children and do not allow persons unfamil iar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. 1. This tool must NOT be modified or used for any application other than that for which it was designed. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. Do not misuse this product. Excessive exposure to vibration, work in awkward positions, and repetitive work motions can cause injury to hands and arms. Stop using any tool if discomfort, numbness, tingling, or pain occur, and consult a physician. 1. Wear ear protectors with impact drills. Exposure to noise can cause hearing loss. 2. Use auxillary handle supplied with the tool. Loss of control can cause personal injury. 1. Side handle 2. Depth gauge 2 3. Clamping lever 4. Hammer/Drill lever 5. Lock button 6. Switch 8 7. Forward/Reverse lever 8. Chuck 7 9. Power cord 6 10. Chuck key holder 5 4 32 9 8 1 3. Always work in a well- ventilated area. Wear an OSHA-approved dust mask and safety glasses. 4. Keep hands away from rotating parts. Tool Features 3 Operating Instructions and Parts Manual General Power Tool Safety Warnings (Cont’d.) 2. Use only accessories that are recommended by the manufacturer for your model. Accessories suitable for one tool may create a risk of injury when used on another tool. 3. Some wood contains preservatives which can be toxic. Take extra care to prevent inhalation and skin contact when working with these materials. Request and follow all safety information available from your material supplier. SERVICE Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Assembly Always unplug the tool and place the switch in the locke...

Эта инструкция также подходит к моделям:
Дрели и шуропопверты - DG190625DI (987.13 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории