Оценок - 2, средний балл: 5
(
)
)
|
Фрагмент инструкции
Press the digit button of the preset channel (limited to one digit) , you can - complete the selection of channel while you turn on the TV set( To operate the preset of TV channel, please see TUNING on page 11-14). 2. When you do not use the remote control, you can directly press the CH+/- button on the television to call off the standby status. 3. Press the (!) button on the remote control to get into the standby state. 4. Press the © button on the TV set to completely turn off the TV. Power supply auto-off function When the B.B(black background) is set ON, and there is no signal , Haie( screen protection works, and ,in15 minutes later without any operation, it will change into standby status. o I Viewing TV Programs The channels amount to 218 Viewing TV programs © © © © © © © I © (9Ï Direct-digit Choosing button Digit Select button PRE BACK SYSTEM How to select the TV program 1. Use the direct-digit choosing button • Press the button from 0-9 to select a one digit channel. • If you want to select a two-digits channel, press the Digit Select button and change it into two-digits mode, then press the number of the channel. • If you want to select a three-digits channel, press the Digit Select button and change it into three-digits mode, then press the number of the channel. • If the channel position number you select is larger than 218, the TV will use the first two number as the channel position. 2. Use CH+/- button ( Press CH+ to increase the channel position number. ( Press CH- to decrease the channel position number. 3. Use PRE button and BACK button ( Press PRE button, you can go back to the channels you viewed (as many as four). ( Then, press BACK button, you can return to the channels you were watching just now (as many as four) . ( For example, if you have viewed channel 1,2,3,4,5,6 after the TV is powered on, and the channel you are watching now is number 7, then press PRE button, you can view channel 6,5, 4,3, and you may press the Back button to return to channel 7. Choose the proper volume you like_ Press VOL+/- button to adjust the volume. VOLUME 50 If the color of one channel is abnormal It might be because the color has been set improperly.You may follow the instruction below to adjust it. Press SYSTEM button, and you can see the form. • If the color of the picture is abnormal Press CH+/- button, and move the indicator to COLOR, and press VOL+/- button to select the proper color(AUTO, NTSC3.58,NTSC4.43 and PAL will appear alternately). Generally, please set to AUTO. 1 If the sound is abnormal Press CH+/- button, and move the indicator to SOUND, and press VOL+/- button to select the proper color(DK, I,BG and M will appear alternately). o I Viewing TV Programs(coutinued) Program scanning function is to let the television automatically scan all preconcerted channel program(about two seconds per channel). Program scan and screen displa SCAN DISP Program scanning function 1. If you wan...
Эта инструкция также подходит к моделям:Дрели и шуропопверты - SMART TEMP 15F6B (1.77 mb)
Дрели и шуропопверты - SMART TEMP 15F6B (1.77 mb)
Дрели и шуропопверты - SMART TEMP 21F5A (1.77 mb)
Дрели и шуропопверты - SMART TEMP 21F7A (1.77 mb)