Оценок - 4, средний балл: 3.8 ( )

Производитель: Ingersoll-Rand Размер: 471.44 kb Название файла: Язык инструкции:

NOTE The use of other than genuine Ingersoll- --Rand replacement parts may result in safety hazards, decreased tool performance, and increased maintenance, and may invalidate all warranties. Repairs should be made only by authorized trained personnel. Consult your nearest Ingersoll- --Rand Authorized Servicenter. Refer All Communications to the Nearest Ingersoll- --Rand Office or Distributor. . Ingersoll- --Rand Company 2001 PrintedinU.S.A. 2 WARNING SYMBOL IDENTIFICATION FAILURE TO OBSERVE THE FOLLOWING WARNINGS COULD RESULT IN INJURY. Always wear eye protection when operating or performing maintenance on this tool. WARNING WARNING Always wear hearing protection when operating this tool. Always turn off the air supply and disconnect the air supply hose before installing, removing or adjusting any accessory on this tool, or before performing any maintenance on this tool. WARNING Air powered tools can vibrate in use. Vibration, repetitive motions or uncomfortable positions may be harmful to your hands and arms. Stop using any tool if discomfort, tingling feeling or pain occurs. Seek medical advice before resuming use. WARNING Do not carry the tool by the hose. WARNING WARNING Do not use damaged, frayed or deteriorated air hoses and fittings. WARNING Keep body stance balanced and firm. Do not overreach when operating this tool. WARNING Operate at 90 psig (6.2 bar/ 620 kPa) Maximum air pressure. 90 psig (6.2bar/620kPa) International Warning Label: Order Part No. ___________ PERCUSSIVE TOOL SPECIFIC WARNINGS • When wearing gloves and operating models with inside trigger, always be sure that the gloves will not prevent the trigger from being released. • Wear safety shoes, hard hat, safety goggles, gloves, dustmask and any other appropriate protective clothing while operating the tool. • Do not indulge in horseplay. Distraction can cause accidents. • Keep hands and fingers away from the throttle lever until it is time to operate the tool. • Never rest the tool or chisel on your foot. • Never point the tool at anyone. • Compressed air is dangerous. Never point an air hose at yourself or co--workers. • Never blow clothes free of dust with compressed air. • Be sure all hose connections are tight. A loose hose not only leaks but can come completely off the tool and while whipping under pressure, can injure the operator and others in the area. Attach safety cables to all hoses to prevent injury in case a hose is accidentally broken. • Never disconnect a pressurized air hose. Always turn off the air supply and bleed the tool before disconnecting a hose. • The operator must keep limbs and body clear of the chisel. If a chisel breaks, the tool with the broken chisel projecting from the tool will suddenly surge forward. • Do not ride the tool with one leg over the handle. Injury can result if the chisel breaks while riding the tool. • Know what is underneath the material being worked. Be alert for hidden water, gas, sewer, telephone or electric lines. • Use onl...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: